Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 1550107
PHOENIX CONTACT 1550107
PHOENIX CONTACTNot available

RIF-0-RPT-24DC/21/MS - Relay module

Pre-assembled relay module with Push-in connection, consisting of: relay base with ejector and plug-in miniature relay with power contact and manual override. Contact switching type: 1 changeover contact. Input voltage: 24 V DC
Product Code: 1550107
Partner cod.: 1550107
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Description
Download
Tecnichal data
Product propertiesProduct type: Relay Module
Product family: RIFLINE complete
Application: Universal
Operating mode: 100% operating factor
Mechanical service life: approx. 2x 107 cycles
Data management status
Date of last data management: 03.09.2024
Article revision: 01
Insulation characteristics
Insulation: safe isolation
Overvoltage category: III
Pollution degree: 2
Electrical propertiesService life electrical: see diagram
Maximum power dissipation for nominal condition: 0.22 W
Test voltage (Winding/contact): 4 kVrms (50 Hz, 1 min., winding/contact)
Rated insulation voltage: 250 V AC
Rated surge voltage: 6 kV
Input dataCoil side
Nominal input voltage UN: 24 V DC
Input voltage range: 19.2 V DC ... 36 V DC (20 °C)
Input voltage range in reference to UN: see diagram
Drive and function: monostable
Drive (polarity): non-polarized
Typical input current at UN: 9 mA
Typical response time: 5 ms
Typical release time: 8 ms
Coil voltage: 24 V DC
Protective circuit: Freewheeling diode
Operating voltage display: Yellow LED
Output dataSwitching
Contact switching type: 1 changeover contact
Type of switch contact: Single contact
Contact material: AgSnO
Maximum switching voltage: 250 V AC/DC
Minimum switching voltage: 5 V (100 mA)
Limiting continuous current: 6 A
Min. switching current: 10 mA (12 V)
Interrupting rating (ohmic load) max.: 140 W (24 V DC)
20 W (48 V DC)
18 W (60 V DC)
23 W (110 V DC)
40 W (220 V DC)
1500 VA (250 V AC)
Utilization category CB Scheme (IEC 60947-5-1): AC15, 3 A/250 V (N/O contact)
AC15, 1 A/250 V (N/C contact)
DC13, 1.5 A/24 V (N/O contact)
DC13, 0.2 A/110 V (N/O contact)
DC13, 0.1 A/220 V (N/O contact)
Connection dataConnection method: Push-in connection
Stripping length: 8 mm
Conductor cross section rigid: 0.14 mm² ... 1.5 mm²
Conductor cross section flexible: 0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section AWG: 24 ... 16
DimensionsWidth: 6.2 mm
Height: 93 mm
Depth: 78 mm
Material specificationsColor: gray (RAL 7042)
Flammability rating according to UL 94: V2 (Housing)
Environmental and real-life conditionsAmbient conditions
Degree of protection (Relay base): IP20 (Relay base)
Degree of protection (Relay): RT III (Relay)
Ambient temperature (operation): -40 °C ... 60 °C
Ambient temperature (storage/transport): -40 °C ... 85 °C
ApprovalsCorrosive gas test
Identification: ISA-S71.04. G3 Harsh Group
EN 60068-2-60
Standards and regulationsStandards/regulations: IEC 60947-5-1
MountingMounting type: DIN rail mounting
Assembly note: in rows with zero spacing
Mounting position: any
Description
RIF-0-RPT-24DC/21/MS Modulo portarele
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Manufacturer_declaration_01180.pdf

Manufacturer_declaration_03152.pdf

Package_slip_02190.pdf

Technical_drawing_16225.pdf