Industrial Automation
Product properties | Product line: COMBICON Terminals L Product type: Printed circuit board terminal Product family: SPT 5/..-V Number of positions: 1 Pitch: 7.5 mm Number of connections: 1 Number of rows: 1 Number of potentials: 1 Pin layout: Linear pinning Solder pins per potential: 2 |
Electrical properties | Nominal current IN: 41 A Nominal voltage UN: 1000 V Degree of pollution: 3 Rated voltage (III/3): 630 V Rated surge voltage (III/3): 6 kV Rated voltage (III/2): 630 V Rated surge voltage (III/2): 6 kV Rated voltage (II/2): 1000 V Rated surge voltage (II/2): 6 kV |
Connection data | Connection technology Nominal cross section: 6 mm² Conductor connection Connection method: Push-in spring connection Conductor cross section rigid: 0.2 mm² ... 10 mm² (Conductor connection with open terminal point) 0.75 mm² ... 10 mm² (Push-in connection) Conductor cross section flexible: 0.2 mm² ... 6 mm² Conductor cross section AWG: 24 ... 8 Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 6 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 6 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve: 0.25 mm² ... 1.5 mm² Stripping length: 15 mm |
Mounting | Mounting type: Wave soldering Pin layout: Linear pinning Connection method: Push-in spring connection |
Material specifications | Material data - contact Note: WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 Contact material: Cu alloy Surface characteristics: Tin-plated Metal surface terminal point (top layer): Tin (4 - 8 µm Sn) Metal surface soldering area (top layer): Tin (4 - 8 µm Sn) Material data - housing Color (Housing): brown (8028) Insulating material: PA Insulating material group: I CTI according to IEC 60112: 600 Flammability rating according to UL 94: V0 Glow wire flammability index GWFI according to EN60695-2-12: 850 Glow wire ignition temperature GWIT according to EN60695-2-13: 775 Temperature for the ball pressure test according to EN60695-10-2: 125 °C |
Notes | General: The single-position PCB terminal block can be used for voltages up to 1500V (DC) and 1000V (AC). The relevant device standard and the appropriate required air clearances and creepage distances should be observed following installation |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/158b0afe23d1ab408f646eacfe25f655/-S204x204-FJPG Pitch: 7.5 mm Width [w]: 9.3 mm Height [h]: 28.75 mm Length [l]: 18.5 mm Installed height: 24.15 mm Solder pin length [P]: 4.6 mm Pin dimensions: 1.7 x 0.8 mm PCB design Pin spacing: 14 mm Hole diameter: 2.1 mm |
Mechanical tests | Connection test Specification: IEC60998-2-2:2002-12 Result: Test passed Test for conductor damage and slackening Specification: IEC60998-2-2:2002-12 Result: Test passed Pull-out test Specification: IEC60998-2-2:2002-12 Conductor cross section/conductor type/tractive force setpoint/actual value: 0.2 mm² / solid / > 10 N 0.2 mm² / flexible / > 10 N 10 mm² / solid / > 90 N 6 mm² / flexible / > 80 N Flexion test Specification: IEC60998-2-2:2002-12 Result: Test passed Insulation holder for crimp connections Result: Test passed |
Electrical tests | Temperature-rise test Specification: IEC60998-2-1:2002-12 Requirement temperature-rise test: Increase in temperature â¤45K Insulation resistance Specification: IEC60998-1:2002-12 Insulation resistance, neighboring positions: >5Mé Air clearances and creepage distances | Specification: IEC60664-1:1992-10 + A1:2000-02 + A2:2002-05 Insulating material group: I Comparative tracking index (IEC60112): CTI 600 Rated insulation voltage (III/3): 630 V Rated surge voltage (III/3): 6 kV minimum clearance value - non-homogenous field (III/3): 5.5 mm minimum creepage distance (III/3): 8 mm Rated insulation voltage (III/2): 630 V Rated surge voltage (III/2): 6 kV minimum clearance value - non-homogenous field (III/2): 5.5 mm minimum creepage distance (III/2): 5.5 mm Rated insulation voltage (II/2): 1000 V Rated surge voltage (II/2): 6 kV minimum clearance value - non-homogenous field (II/2): 5.5 mm minimum creepage distance (II/2): 5.5 mm |
Environmental and real-life conditions | Vibration test Specification: IEC60068-2-6:1995-03 Frequency: 10 - 150 - 10 Hz Sweep speed: 1octave/min 5g (60.1Hz...150Hz) Amplitude: 0.35mm (10Hz...60.1Hz) Test duration per axis: 2.5 h Glow-wire test Specification: IEC60998-1:2002-12 Temperature: 850 °C Time of exposure: 5 s Ambient conditions Ambient temperature (operation): -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) Ambient temperature (storage/transport): -40 °C ... 70 °C Relative humidity (storage/transport): 30 % ... 70 % Ambient temperature (assembly): -5 °C ... 100 °C |
Packaging specifications | Type of packaging: packed in cardboard |
ECLASS | ECLASS-11.0: 27460101 ECLASS-12.0: 27460101 ECLASS-13.0: 27460101 |
ETIM | ETIM 8.0: EC002643 |
UNSPSC | UNSPSC 21.0: 39121400 |
Description other products