Industrial Automation
Product properties | Type: PC terminal block can be aligned Product line: COMBICON Terminals L Product type: Printed circuit board terminal Product family: MKDS 10 HV Number of positions: 6 Pitch: 10.16 mm Number of connections: 6 Number of rows: 1 Number of potentials: 6 Pin layout: Zigzag pinning W Solder pins per potential: 2 |
Electrical properties | Nominal current IN: 76 A Nominal voltage UN: 1000 V Degree of pollution: 3 Rated voltage (III/3): 800 V Rated surge voltage (III/3): 8 kV Rated voltage (III/2): 1000 V Rated surge voltage (III/2): 8 kV Rated voltage (II/2): 1000 V Rated surge voltage (II/2): 8 kV |
Connection data | Connection technology Type: PC terminal block can be aligned Nominal cross section: 16 mm² Conductor connection Connection method: Screw connection with tension sleeve Conductor cross section rigid: 0.5 mm² ... 16 mm² Conductor cross section flexible: 0.5 mm² ... 16 mm² Conductor cross section AWG: 20 ... 6 Conductor cross section flexible, with ferrule without plastic sleeve: 0.5 mm² ... 16 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.5 mm² ... 16 mm² 2 conductors with same cross section, solid: 0.5 mm² ... 6 mm² 2 conductors with same cross section, flexible: 0.5 mm² ... 6 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve: 0.5 mm² ... 4 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve: 0.5 mm² ... 6 mm² Stripping length: 10 mm Tightening torque: 1.2 Nm ... 1.5 Nm |
Mounting | Mounting type: Wave soldering Pin layout: Zigzag pinning W Drive form screw head: Slotted(L) Connection method: Screw connection with tension sleeve |
Material specifications | Material data - contact Note: WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 Contact material: Cu alloy Surface characteristics: Tin-plated Metal surface terminal point (top layer): Tin (5 - 7 µm Sn) Metal surface terminal point (middle layer): Nickel (2 - 3 µm Ni) Metal surface soldering area (top layer): Tin (5 - 7 µm Sn) Metal surface soldering area (middle layer): Nickel (2 - 3 µm Ni) Material data - housing Color (Housing): green (6021) Insulating material: PA Insulating material group: I CTI according to IEC 60112: 600 Flammability rating according to UL 94: V0 Glow wire flammability index GWFI according to EN60695-2-12: 850 Glow wire ignition temperature GWIT according to EN60695-2-13: 775 Temperature for the ball pressure test according to EN60695-10-2: 125 °C |
Notes | Note on application: For reliable conductor connection, always adhere to a defined tightening torque. During conductor connection (mounting), the terminal blocks must be supported (held with one hand, support on the housing). |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/158b0afe23d1ab408f646eacfe25f655/-S204x204-FJPG Pitch: 10.16 mm Width [w]: 60.96 mm Height [h]: 35.8 mm Length [l]: 18.7 mm Installed height: 30.8 mm Solder pin length [P]: 5 mm Pin dimensions: 1 x 0.9 mm PCB design Hole diameter: 1.5 mm |
Mechanical tests | Test for conductor damage and slackening Specification: IEC60999-1:1999-11 Result: Test passed Pull-out test Specification: IEC60999-1:1999-11 Conductor cross section/conductor type/tractive force setpoint/actual value: 0.5 mm² / solid / > 20 N 0.5 mm² / flexible / > 20 N 16 mm² / solid / > 100 N 16 mm² / flexible / > 100 N |
Electrical tests | Temperature-rise test Specification: IEC60947-7-4:2019-01 Requirement temperature-rise test: The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature. Short-time withstand current Specification: IEC60947-7-4:2019-01 Insulation resistance Specification: IEC60512-3-1:2002-02 Insulation resistance, neighboring positions: >5Mé Air clearances and creepage distances | Specification: IEC60947-1:2007-06 + A1:2010-12 + A2:2014-09 Insulating material group: I Comparative tracking index (IEC60112): CTI 600 Rated insulation voltage (III/3): 800 V Rated surge voltage (III/3): 8 kV minimum clearance value - non-homogenous field (III/3): 8 mm minimum creepage distance (III/3): 10 mm Rated insulation voltage (III/2): 1000 V Rated surge voltage (III/2): 8 kV minimum clearance value - non-homogenous field (III/2): 8 mm minimum creepage distance (III/2): 8 mm Rated insulation voltage (II/2): 1000 V Rated surge voltage (II/2): 8 kV minimum clearance value - non-homogenous field (II/2): 8 mm minimum creepage distance (II/2): 10 mm |
Environmental and real-life conditions | Vibration test Specification: IEC60068-2-6:2007-12 Frequency: 10 - 150 - 10 Hz Sweep speed: 1octave/min 5g (60.1Hz...150Hz) Amplitude: 0.35mm (10Hz...60.1Hz) Test duration per axis: 2.5 h Glow-wire test Specification: IEC60695-2-10:2013-04 Temperature: 850 °C Time of exposure: 5 s Aging Specification: IEC60947-7-4:2019-01 Ambient conditions Ambient temperature (operation): -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) Ambient temperature (storage/transport): -40 °C ... 70 °C Relative humidity (storage/transport): 30 % ... 70 % Ambient temperature (assembly): -5 °C ... 100 °C |
Packaging specifications | Type of packaging: packed in cardboard |
ECLASS | ECLASS-11.0: 27460101 ECLASS-12.0: 27460101 ECLASS-13.0: 27460101 |
ETIM | ETIM 9.0: EC002643 |
UNSPSC | UNSPSC 21.0: 39121400 |
Description other products