Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access B2B
Log in to your account

Access services

Enter your reserved area

Access B2B
Log in to your account
Country|
||
PHOENIX CONTACT 1814582
PHOENIX CONTACTNot available

PTSM 0,5/ 4-2,5-V THR WH R44 - PCB terminal block

PCB terminal block, nominal current: 6 A, rated voltage (III/2): 160 V, nominal cross section: 0.5 mm2, number of potentials: 4, number of rows: 1, number of positions per row: 4, product range: PTSM 0,5/..-V-THR WH, pitch: 2.5 mm, connection method: Push-in spring connection, mounting: THR soldering, conductor/PCB connection direction: 90 °, color: signal white, Pin layout: Linear pinning, Solder pin [P]: 2.1 mm, number of solder pins per potential: 2, type of packaging: 44 mm wide tape
Product Code: 1814582
Partner cod.: 1814582
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Download
Tecnichal data
Product propertiesType: Component suitable for through hole reflow
Product line: COMBICON Terminals XS
Product type: Printed circuit board terminal
Product family: PTSM 0,5/..-V-THR WH
Number of positions: 4
Pitch: 2.5 mm
Number of connections: 4
Number of rows: 1
Number of potentials: 4
Pin layout: Linear pinning
Solder pins per potential: 2
Electrical propertiesNominal current IN: 6 A
Nominal voltage UN: 160 V
Degree of pollution: 3
Rated voltage (III/3): 160 V
Rated surge voltage (III/3): 2.5 kV
Rated voltage (III/2): 160 V
Rated surge voltage (III/2): 2.5 kV
Rated voltage (II/2): 400 V
Rated surge voltage (II/2): 2.5 kV
Connection dataConnection technology
Type: Component suitable for through hole reflow
Nominal cross section: 0.5 mm²
Conductor connection
Connection method: Push-in spring connection
Conductor cross section rigid: 0.14 mm² ... 0.5 mm²
Conductor cross section flexible: 0.2 mm² ... 0.5 mm² (up to 0.75mm² supported, with a stripping length of 7.5mm and a rated insulation voltage of 32V at III/2)
Conductor cross section AWG: 26 ... 20
Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 0.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 0.34 mm² (possible from 0.14mm², when using ferrule AI0.14-6GY in combination with crimping pliers CRIMPFOX 10T-F)
Stripping length: 6 mm
MountingMounting type: THR soldering
Pin layout: Linear pinning
Connection method: Push-in spring connection
Processing notes
Process: Reflow/wave soldering
Moisture Sensitive Level: MSL 1
Classification temperature Tc: 260°C
Solder cycles in the reflow: 3
Material specificationsMaterial data - contact
Note: WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material: Cu alloy
Surface characteristics: hot-dip tin-plated
Metal surface terminal point (top layer): Tin (4 - 8 µm Sn)
Metal surface soldering area (top layer): Tin (4 - 8 µm Sn)
Material data - housing
Color (Housing): signal white (9003)
Insulating material: PA
Insulating material group: I
CTI according to IEC 60112: 600
Flammability rating according to UL 94: V0
NotesNote on application: Pick and place pads may protrude beyond the components. The PCB layout must ensure that collisions are avoided when components are assembled.
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/158b0afe23d1ab408f646eacfe25f655/-S204x204-FJPG
Pitch: 2.5 mm
Width [w]: 10.5 mm
Height [h]: 12.1 mm
Length [l]: 5 mm
Installed height: 10 mm
Solder pin length [P]: 2.1 mm
Pin dimensions: 0.3 x 0.8 mm
PCB design
Pin spacing: 2.5 mm
Hole diameter: 1.2 mm
Electrical testsAir clearances and creepage distances |
Insulating material group: I
Rated insulation voltage (III/3): 160 V
Rated surge voltage (III/3): 2.5 kV
Rated insulation voltage (III/2): 160 V
Rated surge voltage (III/2): 2.5 kV
Rated insulation voltage (II/2): 400 V
Rated surge voltage (II/2): 2.5 kV
Environmental and real-life conditionsAmbient conditions
Ambient temperature (operation): -40°C ... 100°C (Depending on the current carrying capacity/derating curve)
Ambient temperature (storage/transport): -40°C ... 70°C
Relative humidity (storage/transport): 30 % ... 70 %
Ambient temperature (assembly): -5°C ... 100°C
Packaging specificationsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/5c9d0417f989e646afbbef42108ede86/-S204x204-FJPG
Type of packaging: 44 mm wide tape
[W] tape width: 44 mm
[W2] coil overall dimension: 50.4 mm
[A] coil diameter: 330 mm
Outer packaging type: Transparent-Bag
ESD level: (D) electrostatically conductive
Specification: DINEN61340-5-1 (VDE0300-5-1): 2008-07
Technical Specs
ECLASSECLASS-11.0: 27460101
ECLASS-12.0: 27460101
ECLASS-13.0: 27460101
ETIMETIM 9.0: EC002643
UNSPSCUNSPSC 21.0: 39121400
Description
PCB terminal block, nominal current: 6 A, rated voltage (III/2): 160 V, nominal cross section: 0.5 mm², pitch: 2.5 mm, number of positions: 4, connection method: Push-in spring connection, mounting: THR soldering, conductor/PCB connection direction: 90 °, color: white, Pin layout: Linear double pinning, Solder pin [P]: 2.1 mm
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00507.pdf

Approvals_00546.pdf

Approvals_00605.pdf

Manufacturer_declaration_05483.pdf

Technical_drawing_27560.pdf

Other products

Description other products

PHOENIX CONTACT 1928851
FK-MPT 0,5/11-3,5-H - PCB terminal block
Cod. Articolo: 1928851
PCB terminal block, nominal current: 4 A, rated voltage (III/2): 250 V, nominal cross section: 0.5 mm2, number of potentials: 11, number of rows: 1, number of positions per row: 11, product range: FK-MPT 0,5/..-H, pitch: 3.5 mm, connection method: Push-in spring connection, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 4 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard
More info →
PHOENIX CONTACT 1725672
MPT 0,5/ 4-2,54 - PCB terminal block
Cod. Articolo: 1725672
PCB terminal block, nominal current: 6 A, rated voltage (III/2): 160 V, nominal cross section: 0.5 mm2, number of potentials: 4, number of rows: 1, number of positions per row: 4, product range: MPT 0,5, pitch: 2.54 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 3.5 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard
More info →
PHOENIX CONTACT 1706222
IDC 0,3/ 7-3,81 - PCB terminal block
Cod. Articolo: 1706222
PCB terminal block, nominal current: 5 A, rated voltage (III/2): 160 V, nominal cross section: 0.34 mm2, number of potentials: 7, number of rows: 1, number of positions per row: 7, product range: IDC 0,3, pitch: 3.81 mm, connection method: Displacement connection, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 3.4 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard
More info →