2300889 PHOENIX CONTACT - Technology Bsa

DFLK-32 SMKDS3/SMKDS3 - Interface module

VARIOFACE feed-through module, for direct 1:1 coupling of individual signal cables up to 2.5 mm², via angled screw connection terminal blocks at both ends; no. of positions: 32

Product Code: 2300889

Partner cod.: 2300889

PHOENIX CONTACT

Product properties	Product type: Interface module Product family: VARIOFACE Number of positions: 32 Insulation characteristics Insulation: Functional insulation Insulation characteristics: Air clearances and creepage distances Insulation: Functional insulation Overvoltage category: II Pollution degree: 2
Electrical properties	Nominal voltage U_N: 150 V AC/DC Max. current carrying capacity per branch: 4 A Air clearances and creepage distances Rated insulation voltage: 300 V Rated surge voltage: 2.5 kV
Connection data	Field level Connection in acc. with standard: IEC / EN Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Number of positions: 32 Conductor cross section rigid: 0.2 mm² ... 4 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 Controller level Connection method: Screw connection Number of positions: 32 Conductor cross section rigid: 0.2 mm² ... 4 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Signaling	Status display present: No
Dimensions	Item dimensions Width: 180 mm Height: 27.5 mm Depth: 49 mm
Material specifications	Housing insulation material: Polyamide PA non-reinforced
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Degree of protection (Installation location): Ã¢¥ IP54 (Installation location) Ambient temperature (operation): -20°C ... 50°C Ambient temperature (storage/transport): -30°C ... 70°C Altitude: max. 2000 m
Standards and regulations	Air clearances and creepage distances Standards/regulations: EN60664-1
Mounting	Mounting type: Rear mounting Assembly instructions: in rows with zero spacing Mounting position: any
Notes	General: The necessary requirements for insulation (basic insulation or reinforced insulation) from adjacent modules (in DIN-rail direction) must be realized by applying suitable measures (e.g., partition plates). Ensure that the supply voltage of the device has a common reference potential. For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.