Industrial Automation
FL COMSERVER BASIC 232/422/485 - Interface converters
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area Utilization restrictionâ CCCex note: Use in potentially explosive areas is not permitted in China. |
Product properties | Product type: Interface converter Application: TCP, UDP MTTF: 2001 Years (SN29500 standard, temperature25°C, operating cycle21%) 870 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 355 Years (SN29500 standard, temperature40°C, operating cycle100%) MTBF: 666 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) 179 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day)) |
System properties | System requirements Supported browsers: Netscape Communicator versions 4.5 and up or Internet Explorer versions 5.5 and up |
Electrical properties | Electrical isolation: VCC // Ethernet // Serial Maximum power dissipation for nominal condition: 2.4 W Test voltage data interface/data interface: 1.5 kVrms (50Hz, 1min.) Test voltage data interface/power supply: 1.5 kVrms (50Hz, 1min.) 1.5 kVrms Supply Supply voltage range: 19.2 V AC/DC ... 28.8 V AC/DC (via pluggable COMBICON screw terminal block) 22.8 VDC ... 25.2 VDC (as an alternative or redundant, via backplane bus contact and system current supply) Nominal supply voltage: 24 V AC/DC ±20% (via pluggable COMBICON screw terminal block) 24 VDC ±5% (as an alternative or redundant, via backplane bus contact and system current supply) Typical current consumption: 100 mA (24VDC) Function Management: Web-based management, SNMP, emergency exit with Telnet and serial Status and diagnostic indicators: LEDs: UL (logic voltage), TD + RD (data activity serial), FD (full duplex), 100 (100 Mbps mode), Link (Ethernet), Activity (Ethernet), ERR (error) |
Connection data | Supply Tightening torque: 0.56 Nm ... 0.79 Nm |
Interfaces | Signal: Ethernet Web server: yes Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3 Serial transmission speed: 10/100 Mbps, auto negotiation Connection method: RJ45 jack, shielded No. of channels: 1 Transmission length: ⤠100 m (shielded twisted pair) Protocols supported: TCP/IP, UDP Auxiliary protocols: ARP, DHCP, BOOTP, SNMP, RIP, RARP, HTTP, TFTP, ICMP Data: V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN66259-1 Serial transmission speed: 0.3; 0.6; 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 38.4; 57.6; 115.2; 187.5; 230.4 kbps Connection method: D-SUB9 plug Pin assignment: DTE/DCE switchover via web-based management Transmission length: 15 m File format/coding: UART/NRZ: 7/8 Bit Data, 1/2 Bit Stopp, None/Even/Odd Parity Data flow control/protocols: Software handshake, Xon/Xoff or hardware handshake RTS/CTS Data: RS-422 interface in acc. with ITU-T V.11, EIA/TIA-422, DIN 66348-1 Serial transmission speed: 0.3; 0.6; 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 38.4; 57.6; 115.2; 187.5; 230.4; 500; 1000 kbps Connection method: Plug-in/screw connection via COMBICON Transmission length: ⤠1200 m Termination resistor: 390 é (configurable) 180 é 390 é File format/coding: UART/NRZ: 7/8 Bit Data, 1/2 Bit Stopp, None/Even/Odd Parity Data flow control/protocols: Automatic control Data: RS-485 interface, in acc. with EIA/TIA-485, DIN 66259-4/RS-485 2-wire Serial transmission speed: 0.3; 0.6; 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 38.4; 57.6; 115.2; 187.5; 230.4; 500; 1000 kbps Connection method: Plug-in/screw connection via COMBICON Termination resistor: 390 é (configurable) 180 é 390 é File format/coding: UART/NRZ: 7/8 Bit Data, 1/2 Bit Stopp, None/Even/Odd Parity Data flow control/protocols: Automatic control |
Dimensions | Width: 22.5 mm Height: 99 mm Depth: 116 mm |
Material specifications | Material: PA 6.6-FR |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C -20°C ... 60°C (in acc. with UL) Ambient temperature (storage/transport): -25°C ... 70°C Altitude: ⤠5000 m (For restrictions, see the manufacturer's declaration for altitude operation) Permissible humidity (operation): 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing) |
Approvals | CE Certificate: CE-compliant EAC Identification: EAC ATEX Identification: ï II 3G Ex nA IIC T4 Gc X Note: Please follow the special installation instructions in the documentation! UL, USA/Canada Identification: 508 Listed Class I, Div. 2, Groups A, B, C, D UL, USA Identification: Class I, Zone 2, AEx nA IIC T5 UL, Canada Identification: Class I, Zone 2, Ex nA IIC T5 Gc X KC approval for South Korea Certificate: KCC-REI-PCK-FL2313478 Corrosive gas test Identification: ISA-S71.04-1985 G3 Harsh Group A |
EMC data | Noise immunity: EN 61000-6-2:2005 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Noise emission: EN 61000-6-4 Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeâ Contact discharge: ± 6 kV Discharge in air: ± 8 kV Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldâ Field intensity: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)â Input: 2 kV (5kHz) Signal: 1 kV (5kHz) Comments: Criterion A Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)â Input: 2 kV Signal: 1 kV Comments: Criterion B Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceâ Comments: Criterion A Voltage: 10 V Emitted interference Standards/regulations: EN55032 Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself. |
Standards and regulations | Free from substances that could impair the application of coating: in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0 Standards/regulations: EN50121-4 |
Mounting | Mounting type: DIN rail mounting |
ECLASS | ECLASS-11.0: 27242208 ECLASS-12.0: 27242208 ECLASS-13.0: 27242208 |
ETIM | ETIM 9.0: EC001423 |
UNSPSC | UNSPSC 21.0: 43222600 |
Description other products