2320283 PHOENIX CONTACT - Technology Bsa

Input data	AC operation Input voltage: 100 VAC -10%/+20% 110 VAC -10%/+20% 120 VAC -10%/+20% 130 VAC -10%/+20% 200 VAC -20%/+20% 210 VAC -20%/+20% 220 VAC -20%/+20% 230 VAC -20%/+15% 240 VAC -20%/+10% Input voltage range: 90 VAC ... 264 VAC Input voltage range AC: 184 VAC ... 264 VAC 96 VAC ... 144 VAC Typical national grid voltage: 120 VAC 230 VAC Voltage type of supply voltage: AC AC frequency range: 45 Hz ... 65 Hz Buffer period: 1 h (38 AH) Current consumption: 10.4 A (100VAC) 10.5 A (110VAC) 10.5 A (120VAC) 9.7 A (130VAC) 6.4 A (200VAC) 6 A (210VAC) 5.7 A (220 V AC) 5.5 A (230 V AC) 5.3 A (240VAC) Variable connect threshold: Can be configured using UPS-CONF software Power factor (cos phi): 0.9 Bypass fuse: T15A/250V (MDA-15-R) Permissible backup fuse: B16 230 V AC 20 A (120VAC, Listed breaker) Digital Control (configurable) Designation: Remote Low signal: Connection to SGnd with < 2.7 kÃ© High signal: Open (> 35 kÃ© between Remote and SGnd) Digital Control Low-Active (configurable) Battery-operated start 120 VAC low signal: Connection to SGnd with < 2.7 kÃ© Battery-operated start 120 VAC high signal: Open (> 200 kÃ© between Bat.-Start and SGnd)
Output data	Classification according to IEC 62040-3: VFI-SS-111 Efficiency: > 92 % (120VAC) > 94 % (230 V AC) Nominal output voltage: 100 VAC 110 VAC 120 VAC 130 VAC 200 VAC 210 VAC 220 VAC 230 VAC 240 VAC Form of output voltage: Pure sine Nominal output current (I_N): 7.8 A (100VAC) 8.1 A (110VAC) 8.3 A (120VAC) 7.7 A (130VAC) 5 A (200VAC) 4.8 A (210VAC) 4.5 A (220 V AC) 4.3 A (230 V AC) 4.2 A (240VAC) POWER BOOST (I_Boost): 13 A (120VAC) 7 A (230 V AC) Output power: 778 VA (700W) 889 VA (800W) 1000 VA (900W) 1000 VA (900W) 1000 VA (900W) 1000 VA (900W) 1000 VA (900W) 1000 VA (900W) 1000 VA (900W) Apparent power: 1 kVA (U_NÃ¯³120 V AC) Nominal power: 900 W (U_NÃ¯³120 V AC) Maximum no-load power dissipation: typ. 17 W (120VAC) typ. 25 W (230 V AC) Power loss nominal load max.: typ. 79 W (120VAC) typ. 55 W (230 V AC) Crest factor: 2.8 Switch-over time: 0 ms Connection in parallel: yes, 2 Connection in series: No Mains operation Nominal output voltage: 120 VAC ±2% 230 VAC ±2% Nominal output current (I_N): 8.3 A 4.3 A (230 V AC) POWER BOOST (I_Boost): 13 A 7 A Battery operation Nominal output voltage: 120 VAC ±2% 230 VAC ±2% Nominal output current (I_N): 4.3 A (230 V AC) 8.3 A (120VAC) POWER BOOST (I_Boost): 7 A (230 V AC) 13 A (120VAC) Nominal output frequency: ± 60 Hz ±0.5% (At an input frequency of 55Hzto<65Hz) ± 50 Hz ±0.5% (At an input frequency of 45Hzto<55Hz) Signal: AC OK Output voltage: 24 V Continuous load current: Ã¢¤ 20 mA Signal: Alarm Output voltage: 24 V Continuous load current: Ã¢¤ 20 mA Signal: Battery mode Output voltage: 24 V Continuous load current: Ã¢¤ 20 mA Signal: Ready Output voltage: 24 V Continuous load current: Ã¢¤ 20 mA Signal: P>P Output voltage: 24 V (SELV) Continuous load current: Ã¢¤ 20 mA
Energy storage	Nominal voltage U_N: 2x 24 VDC End-of-charge voltage: 58 V (temperature compensated) Charging current: 5 A Nominal capacity range: 3.4 Ah ... 190 Ah (5x38Ah) Battery technology: VRLA, VRLA-WTR Charge characteristic curve: IU₀U Permissible backup fuse: 50 A/Ã¯³58V
Connection data	Input Connection method: Screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 6 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 4 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, min.: 0.25 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, max.: 4 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, min.: 0.25 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, max.: 4 mm² Conductor cross section AWG min.: 30 Conductor cross section AWG max.: 10 Stripping length: 8 mm Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Output Connection method: Screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 6 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 4 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, min.: 0.25 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, max.: 4 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, min.: 0.25 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, max.: 4 mm² Conductor cross section AWG min.: 30 Conductor cross section AWG max.: 10 Stripping length: 8 mm Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Signal Connection method: Screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, min.: 0.2 mm² Single conductor/flexible terminal point with ferrule with plastic sleeve, max.: 2.5 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, min.: 0.2 mm² Single conductor/flexible terminal point with ferrule without plastic sleeve, max.: 2.5 mm² Conductor cross section AWG min.: 30 Conductor cross section AWG max.: 12 Stripping length: 8 mm Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm
Interfaces	Interface: MINI-USB type B Features: lockable Maximum cable length: 3 m
Signaling	Types of signaling: LED Active switching output Signal output: Transistor output, active Signalization designation: AC OK Status display: LED Color: green Signal output: Transistor output, activeÃ¢ Signalization designation: Alarm Status display: LED Color: red Signal output: Transistor output, activeÃ¢Ã¢ Signalization designation: Battery mode Status display: LED Color: yellow Signal output: Transistor output, activeÃ¢Ã¢Ã¢ Signalization designation: Ready Signal output: Transistor output, activeÃ¢Ã¢Ã¢Ã¢ Signalization designation: P>P_n Status display: LED Color: green Signal output Signalization designation: Reference potential for the signal inputs and outputs
Electrical properties	Number of phases: 1.00
Product properties	Product type: AC UPS Product family: QUINTAC-USV MTBF (IEC 61709, SN 29500): 217546 h (230 V AC, at 40°C) Insulation characteristics Protection class: I Overvoltage category: II Pollution degree: 3 (Ã¢¤130VAC) 2 (>200VAC) Life expectancy (electrolytic capacitors) Time: 68970 h
Dimensions	Width: 290 mm Height: 130 mm Depth: 125 mm Installation dimensions Installation distance right/left: 5 mm / 5 mm Installation distance top/bottom: 50 mm / 50 mm
Mounting	Mounting type: DIN rail mounting
Material specifications	Housing material: Metal Hood version: Sheet steel, DIN EN ISO2081 coat - Fe/Zn 18/B/TopCoat transparent blue Side element version: Aluminum plate, DIN EN 573-3
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C (>50°C: 2,5%/K) Ambient temperature (storage/transport): -40°C ... 85°C Maximum altitude: Ã¢¤ 3000 m (>2000m:0,6%/100m) Climatic class: 3K3 (EN60721) Max. permissible relative humidity (operation): Ã¢¤ 95 % Shock: 15g in all directions (EN60068-2-27) Vibration (operation): 5Hz...100Hz, 0.7g (EN60068-2-6)
Standards and regulations	Uninterruptible power supply systems Standard designation: Uninterruptible power supply systems Standards/specifications: EN62040-1
Approvals	UL Identification: UL/C-ULRecognizedUL1778
EMC data	Low Voltage Directive: Conformance with Low Voltage Directive 2014/35/EC Interference emission: Noise emission in accordance with EN62040-2 Noise immunity: Immunity in accordance with EN62040-2 Immunity in accordance with EN61000-6-1 (residential), EN61000-6-2 (industrial) Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Conducted noise emission: EN62040-02 (Class C2) Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeÃ¢ Contact discharge: ± 6 kV Discharge in air: ± 8 kV Comments: Criterion A Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldÃ¢ Frequency range: 80 MHz ... 6 GHz Test field strength: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)Ã¢ Input: ± 2 kV Output: ± 2 kV Signal: ± 2 kV ± 2 kV (USB) Comments: Criterion A (B for USB) Surge voltage load (surge) Standards/regulations: EN61000-4-5 Signal: 1 kV (asymmetrical) Comments: Criterion A Input/Output: ± 1 kV (symmetrical) ± 2 kV (asymmetrical) Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceÃ¢ Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V Power frequency magnetic field Standards/regulations: EN61000-4-8 Frequency: 50 Hz 60 Hz Test field strength: 100 A/m Comments: Criterion A Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.