Industrial Automation
AXC F XT ETH 1TX - PLC extension module
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/a1b7c7954dbb5c44bd4a217352158c0f/-S204x204-FJPG Width: 35 mm Height: 126.1 mm Depth: 54 mm Note on dimensions: The depth applies when a TH35-7.5 DIN rail is used (in accordance with EN60715). |
Notes | Utilization restriction CCCex note: Use in potentially explosive areas is not permitted in China. |
Interfaces | Ethernet Bus system: RJ45 Number of interfaces: 1 Connection method: RJ45 jack Note on the connection method: Auto negotiation and autocrossing Transmission speed: 10/100/1000 Mbps (full duplex) Transmission length: max. 100 m |
Product properties | Type: modular Product type: I/O component Product family: PLCnext Control Extension |
Electrical properties | Potentials: Supply of the logic voltage U Supply voltage: 24 VDC Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current draw: max. 80 mA typ. 54 mA (at UL=24V) Protective circuit: Reverse polarity protection; Polarity protection diode Transient protection; Suppressor diode |
Connection data | Connection technology Connection name: AxiolineF connector Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm AxiolineF connector Connection method: Push-in connection Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm |
Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -25°C ... 60°C (up to 2000m above sea level) Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Permissible humidity (operation): 5 % ... 95 % (according to DINEN61131-2) |
Standards and regulations | Protection class: III (IEC 61140, EN61140, VDE0140-1) |
Approvals | ATEX Identification: ï II 3 G Ex ec IIC T4 Gc Certificate: TÃV19ATEX8356X IECEx Identification: Ex ec IIC T4 Gc Certificate: IECExTUR19.0031X CCC/China-Ex Identification: Ex ec IIC T4 Gc Certificate: ï¬, 2021122309114456 UL Ex, USA / Canada Identification: Class I, Zone 2, AEx nA IIC T4 Class I, Div. 2, Groups A, B, C, D Ex nA IIC Gc T4 Certificate: E366272 UL, USA/Canada Identification: cULus Certificate: E238705 Corrosive gas test Identification: ISAS71.04.2013 G3 Harsh Group A, DINEN60068-2-60:2016-06 Method4 |
Mounting | Mounting type: DIN rail mounting |
ECLASS | ECLASS-11.0: 27242608 ECLASS-12.0: 27242608 ECLASS-13.0: 27242608 |
ETIM | ETIM 9.0: EC001604 |
UNSPSC | UNSPSC 21.0: 32151600 |
Description other products