Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 2688394
PHOENIX CONTACTNot available

AXL F BK EIP - Bus coupler

AxiolineF, Bus coupler, EtherNet/IP™, RJ45 jack, transmission speed in the local bus:100 Mbps, degree of protection: IP20, including bus base module and AxiolineF connector
Product Code: 2688394
Partner cod.: 2688394
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Download
Tecnichal data
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/aad81a7f06bc4f4aa1cf74b52bb32fb4/-S204x204-FJPG
Width: 45 mm
Height: 126.1 mm
Depth: 74 mm
Note on dimensions: The depth applies when a TH35-7.5 DIN rail is used (in accordance with EN60715).
InterfacesEtherNet/IP™
Number of interfaces: 2
Connection method: RJ45 jack
Note on the connection method: Auto negotiation and autocrossing
Transmission speed: 10/100 Mbps (Half or full duplex mode (automatic detection, can be adjusted manually))
Transmission physics: Ethernet in RJ45 twisted pair
AxiolineFlocal bus
Number of interfaces: 1
Connection method: Bus base module
Transmission speed: 100 Mbps
Service
Number of interfaces: 1
Connection method: USB type C (from HW 05)
Micro USB type B (up to HW 04)
System propertiesSystem limits
Number of supported devices: max. 63 (per station)
Number of local bus devices that can be connected: max. 63
Product propertiesType: block modular
Product type: I/O component
Product family: AxiolineF
Mounting position: any (observe temperature derating)
Scope of delivery: including bus base module and AxiolineF connector
Insulation characteristics
Overvoltage category: II (IEC 60664-1, EN60664-1)
Pollution degree: 2 (IEC 60664-1, EN60664-1)
Electrical propertiesPotentials: Communications power U
Supply voltage: 24 VDC
Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple)
Current draw: max. 583 mA (2.0A at UBus, UL=24V, up to HW04)
max. 670 mA (2.5A at UBus, UL=24V, from HW05)
Power consumption: max. 14 W (2.0A at UBus, UL=24V, up to HW04)
max. 16 W (2.5A at UBus, UL=24V, from HW05)
Protective circuit: Surge protection; electronic
Reverse polarity protection; electronic
Potentials: AxiolineF local bus supply (U
Supply voltage: 5 VDC (via bus base module)
Power supply unit: max. 2 A (up to HW 04)
max. 2.5 A (from HW 05)
Electrical isolation/isolation of the voltage ranges
Test voltage: Ethernet interface 1 / Ethernet interface 2: 1500 VAC, 50 Hz, 1 min.
Test voltage: Ethernet interface 1 / 24 V communications voltage (UL) feed-in: 1500 VAC, 50 Hz, 1 min.
Test voltage: Ethernet interface 2 / 24 V communications voltage (UL) feed-in: 1500 VAC, 50 Hz, 1 min.
Test voltage: Ethernet interface 1 / functional ground: 1500 VAC, 50 Hz, 1 min.
Test voltage: Ethernet interface 2 / functional ground: 1500 VAC, 50 Hz, 1 min.
Test voltage: 24 V communications voltage (UL) feed-in / functional ground: 500 VAC, 50 Hz, 1 min.
Connection dataConnection technology
Connection name: AxiolineF connector
Note on the connection method: Please observe the information provided on conductor cross sections in the “AxiolineF: system and installation†user manual.
Conductor connection
Connection method: Push-in connection
Conductor cross section rigid: 0.2 mm² ... 1.5 mm²
Conductor cross section flexible: 0.2 mm² ... 1.5 mm²
Conductor cross section AWG: 24 ... 16
Stripping length: 8 mm
AxiolineF connector
Connection method: Push-in connection
Note on the connection method: Please observe the information provided on conductor cross sections in the “AxiolineF: system and installation†user manual.
Conductor cross section, rigid: 0.2 mm² ... 1.5 mm²
Conductor cross section, flexible: 0.2 mm² ... 1.5 mm²
Conductor cross section AWG: 24 ... 16
Stripping length: 8 mm
Environmental and real-life conditionsAmbient conditions
Ambient temperature (operation): -25°C ... 60°C (Mounting position: wall mounting on horizontal DIN rail)
-25°C ... 55°C (Mounting position: any)
Degree of protection: IP20
Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level)
Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level)
Ambient temperature (storage/transport): -40°C ... 85°C
Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Standards and regulationsProtection class: III (IEC 61140, EN61140, VDE0140-1)
MountingMounting type: DIN rail mounting
Mounting position: any (observe temperature derating)
Technical Specs
ECLASSECLASS-11.0: 27242608
ECLASS-12.0: 27242608
ECLASS-13.0: 27242608
ETIMETIM 9.0: EC001604
UNSPSCUNSPSC 21.0: 32151600
Description
Axioline F, Bus coupler, EtherNet/IP™, RJ45 jack, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connector
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00110.pdf

Application_note_00140.pdf

Application_note_00048.pdf

Approvals_00785.pdf

Approvals_01195.pdf

Approvals_01199.pdf

Approvals_01203.pdf

Approvals_01209.pdf

Approvals_01294.pdf

Approvals_01303.pdf

Approvals_01328.pdf

Approvals_01329.pdf

Approvals_01756.pdf

Approvals_01803.pdf

Approvals_01836.pdf

Approvals_01893.pdf

Data_sheet_03161.pdf

Manual_00006.pdf

Manual_00081.pdf

Manual_00007.pdf

Manual_00039.pdf

Manufacturer_declaration_00820.pdf

Manufacturer_declaration_01712.pdf

Manufacturer_declaration_05480.pdf

Manufacturer_declaration_05562.pdf

Manufacturer_declaration_05563.pdf

Package_slip_00690.pdf

Product_information_00033.pdf

Product_information_00244.pdf

Quick_start_guide_00004.pdf

Quick_start_guide_00006.pdf

Technical_drawing_37507.pdf

Various_00004.pdf