2700486 PHOENIX CONTACT - Technology Bsa

NLC-055-012D-08I-04QRD-05A - Base unit

12VDC Nanoline base unit. Equipped with 8 digital inputs, 2 analog (0...10V) inputs and 4 relay output channels. Additional I/O channels can be added using a maximum of three I/O extension modules. Optional communication modules provide network or serial connectivity. Optional Operator Panel provides user interface. Programming is via nanoNavigator.

Product Code: 2700486

Partner cod.: 2700486

PHOENIX CONTACT

Product properties	Product type: Base unit Product family: Nanoline
System properties	System requirements Engineering tool: nanoNavigator 3 or above
Electrical properties	Supply Supply voltage: 12 VDC (Power available to the I/O and Communications modules) Supply voltage range: 9 VDC ... 15 VDC Power supply connection: Screw connection Max. current consumption: 400 mA Typical current consumption: 250 mA Real-time clock Realtime clock: Yes (battery-backed) Description realtime clock: ±2 s/day @ 25°C ±4 s/day @ -20°C ... +60°C Lithium BR2330
Input data	Analog Description of the input: Analog input Number of inputs: 2 A/D converter resolution: 12 bit (monotonic) Connection technology: Screw connection Voltage input signal: 0 VDC ... 10 VDC Input resistance of voltage input: 20 kÃ© Input filter: Digital Limit frequency (3 dB): 1 Hz (3 dB) Measuring principle: Successive approximation Protective circuit: Transient voltage suppression Digital Input name: Digital inputs Description of the input: EN 61131-2 type 1 NPN/PNP Number of inputs: 8 Connection method: Screw connection Input voltage range "0" signal: 0 VDC ... 5 VDC Input voltage range "1" signal: 10.2 VDC ... 14.4 VDC Nominal input voltage U_IN: 12 VDC Nominal input current at U_IN: 3 mA DC (On) < 100 mA (Off) Typical response time: 20 ms (on) 40 µs (OFF) Counter Number of inputs: 2 Input frequency: 6 kHz
Output data	Digital Output name: Relay output Output description: Relay output Connection method: Screw connection Number of outputs: 4 Protective circuit: External protection required Maximum output current per channel: 5 A Maximum output current per module / terminal block: 20 A Maximum output current per module: 5 A Nominal output voltage: 24 VDC Nominal load, ohmic: 600 W (@ 24 ohms) Maximum operating frequency with ohmic nominal load: 0.5 Hz (at full load) Signal delay: 10 ms (@ 20°C (excludes bounce))
Connection data	Connection method: Screw connection Conductor cross section, rigid: 0.2 mm² ... 2.5 mm² Conductor cross section, flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12
Interfaces	Operator Panel Connection method: RJ45 / COMBICON RS-232 Connection method: Slot 1 USB Connection method: Slot 1
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/3f10889ffa636a459d335e433f48a7b7/-S204x204-FJPG Width: 80.5 mm Height: 103.5 mm Depth: 60 mm
Material specifications	Color: white
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C Ambient temperature (storage/transport): -25°C ... 85°C Permissible humidity (operation): 90 % Permissible humidity (storage/transport): 90 %
Mounting	Mounting type: DIN rail mounting