2700524 PHOENIX CONTACT - Technology Bsa

PSR-MC32-3NO-1NC-24-230UC-SC - Safety relays

Safety relay for emergency stop, safety doors, and light grids up to SIL3, Cat.4, PLe, 1 or 2-channel operation, automatic or manual, monitored start, 3 enabling current paths, 1 signaling current path, U_S=24...230VAC/DC, plug-in screw terminal block

Product Code: 2700524

Partner cod.: 2700524

PHOENIX CONTACT

Product properties	Product type: Safety relays Product family: PSRmini Application: Emergency stop Safety door Solenoid switch Transponder Light grid Relay type: Electromechanical relay with force-guided contacts in accordance with IEC/EN61810-3 Times Typical response time: < 150 ms (automatic start) < 100 ms (manual, monitored start) Typ. starting time with U_s: < 200 ms (when controlled via A1) Typical release time: < 20 ms (when actuation is via the sensor circuit) Restart time: < 1 s Recovery time: < 500 ms
Electrical properties	Maximum power dissipation for nominal condition: 17.3 W (at I_L²=72A²) Nominal operating mode: 100% operating factor Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 VAC Rated surge voltage/insulation: Basic insulation 4kV between enabling current path (23/24) and enabling current path (33/34) and signaling current path (41/42) Basic insulation 4kV between all current paths and housing Safe isolation, reinforced insulation 6kV between all other circuits Supply Designation: A1/A2 Rated control circuit supply voltage U_S: 24 V AC/DC ... 230 V AC/DC -15% / +10% Rated control supply current I_S: typ. 103 mA (24VDC) typ. 47 mA (48VDC) typ. 38 mA (110VAC) typ. 21 mA (230 VAC) Power consumption at U_S: 2.7 W (with DC) 2.9 W (with AC) Apparent power: typ. 5 VA (at U_S) Inrush current: < 80 A (Ãt=50µs at U_s) Filter time: 2 ms (at A1 in the event of voltage dips at U_s) Protective circuit: U_S: surge protection; 275 V varistor / 411 V suppressor diode
Input data	Digital: Sensor circuit (S10, S12, S13, S22) Description of the input: safety-related sensor inputs Number of inputs: 4 Input voltage range "0" signal: 0 VDC ... 5 VDC (for safe Off; at S10/S12/S13) Input current range "0" signal: 0 mA ... 2 mA (for safe Off; at S10/S12/S13) Inrush current: < 5 mA (with U_s/I_x at S10/S12/S13) > -5 mA (with U_s/I_xto S22) Filter time: max. 1.5 ms (to S10-S12; test pulse width; at 24VDC) 7.5 ms (to S10-S12; test pulse rate; at 24VDC) Test pulse rate=5xTest pulse width Concurrence: Ã¢ Max. permissible overall conductor resistance: 150 Ã© Protective circuit: Inputs: protection against polarity reversal, surge protection; 38.6 V suppressor diode Current consumption: < 5 mA (with U_s/I_x at S10/S12/S13) > -5 mA (with U_s/I_xto S22) Digital: Start circuit (S34, S35) Description of the input: non-safety-related Number of inputs: 2 Inrush current: < 10 mA (Ãt=330ms) Max. permissible overall conductor resistance: 150 Ã© Protective circuit: Suppressor diode Voltage at input/start and feedback circuit: 24 VDC -20%/+25% Current consumption: typ. 2.5 mA (S34) typ. 1 mA (S35)
Output data	Relay: Enabling current paths (13/14, 23/24, 33/34) Output description: safety-related N/O contacts Number of outputs: 3 (undelayed) Contact switching type: 3 enabling current paths Contact material: AgSnO₂ Switching voltage: min. 5 V AC/DC max. 250 V AC/DC (Observe the load curve) Switching capacity: min. 50 mW Inrush current: min. 10 mA max. 6 A Switching capacity in accordance with IEC 60947-5-1: 5 A (24V (DC13)) 5 A (250V (AC15)) Limiting continuous current: 6 A (observe derating) Sq. Total current: 72 A² (observe derating) Switching frequency: max. 1 Hz Mechanical service life: 10x 10⁶ cycles Interrupting rating (ohmic load) max.: 1500 VA (250 V AC, Ã = 0 ms) For additional values, see load curve Maximum interrupting rating (inductive load): 48 W (24VDC, Ã=40ms) 40 W (48 V DC, Ã = 40 ms) 36 W (60 V DC, Ã = 40 ms) 35 W (110 V DC, Ã = 40 ms) 33 W (220 V DC, Ã = 40 ms) 1500 VA (250VAC, Ã=40ms) Output fuse: 6 A gL/gG 4 A gL/gG (for low-demand applications) Relay: Signaling current path (41/42) Output description: non-safety-related N/C contact Number of outputs: 1 (undelayed) Contact switching type: 1 signaling current path Contact material: AgSnO₂ Switching voltage: min. 5 V AC/DC max. 250 V AC/DC Switching capacity: min. 50 mW Inrush current: min. 10 mA max. 6 A Limiting continuous current: 6 A Switching frequency: 1 Hz Mechanical service life: 10x 10⁶ cycles Output fuse: 6 A gL/gG 4 A gL/gG (for low-demand applications)
Connection data	Connection technology pluggable: yes Conductor connection Connection method: Screw connection Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross-section AWG: 24 ... 12 Stripping length: 7 mm Screw thread: M3
Signaling	Status display: 3 x green LED Operating voltage display: 1 x green LED
Dimensions	Width: 22.5 mm Height: 112.2 mm Depth: 114.5 mm
Material specifications	Housing material: Polyamide
Characteristics	Safety data Stop category: 0 Safety data: ENISO13849 Category: 4 Performance level (PL): e Safety data: IEC 61508 - High demand Safety Integrity Level (SIL): 3 Safety data: IEC 61508 - Low demand Safety Integrity Level (SIL): 3 Safety data: ENIEC 62061 Safety Integrity Level (SIL): 3
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Min. degree of protection of inst. location: IP54 Ambient temperature (operation): -40°C ... 55°C (observe derating) Ambient temperature (storage/transport): -40°C ... 85°C Maximum altitude: Ã¢¤ 2000 m (Above sea level) Max. permissible humidity (storage/transport): 75 % (on average, 85% infrequently, non-condensing) Max. permissible relative humidity (operation): 75 % (on average, 85% infrequently, non-condensing) Shock: 15g Vibration (operation): 10Hz...150Hz, 2g
Approvals	CE Identification: CE-compliant
Standards and regulations	Air clearances and creepage distances between the power circuits Standards/regulations: EN60947-1
Mounting	Mounting type: DIN rail mounting Assembly instructions: See derating curve Mounting position: vertical or horizontal Connection method: Screw connection