2701815 PHOENIX CONTACT - Technology Bsa

AXL F BK PN - Bus coupler

AxiolineF, Bus coupler, PROFINET, RJ45 jack, transmission speed in the local bus:100 Mbps, degree of protection: IP20, including bus base module and AxiolineF connector

Product Code: 2701815

Partner cod.: 2701815

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/aad81a7f06bc4f4aa1cf74b52bb32fb4/-S204x204-FJPG Width: 45 mm Height: 126.1 mm Depth: 74 mm Note on dimensions: The depth applies when a TH35-7.5 DIN rail is used (in accordance with EN60715).
Interfaces	PROFINET Number of interfaces: 2 Connection method: RJ45 jack Note on the connection method: Auto negotiation and autocrossing Transmission speed: 100 Mbps (full duplex) Transmission physics: Ethernet in RJ45 twisted pair AxiolineFlocal bus Number of interfaces: 1 Connection method: Bus base module Transmission speed: 100 Mbps Service Number of interfaces: 1 Connection method: Micro USB type B
System properties	System limits Number of supported devices: max. 63 (per station) Number of local bus devices that can be connected: max. 63 PROFINET Device function: PROFINET device Specification: Version 2.2 Conformance Class: Conformance-Class C Device ID: 1000_hex Vendor ID: 00B0_hex
Product properties	Type: block modular Product type: I/O component Product family: AxiolineF Mounting position: any (observe temperature derating) Scope of delivery: including bus base module and AxiolineF connector Insulation characteristics Overvoltage category: II (IEC60664-1, EN60664-1) Pollution degree: 2 (IEC60664-1, EN60664-1)
Electrical properties	Maximum power dissipation for nominal condition: max. 2.5 W Potentials: Communications power U Supply voltage: 24 VDC Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current draw: max. 570 mA (2.0A on U_Bus, U_L=24V) Power consumption: max. 14 W (2.0A on U_Bus, U_L=24V) Protective circuit: Surge protection; electronic Reverse polarity protection; electronic Potentials: AxiolineF local bus supply (U Supply voltage: 5 VDC (via bus base module) Power supply unit: max. 2 A Electrical isolation/isolation of the voltage ranges Test voltage: PROFINET interface 1 / PROFINET interface 2: 1500 VAC, 50 Hz, 1 min. Test voltage: PROFINET interface 1 / 24 V communications voltage (U_L) feed-in: 1500 VAC, 50 Hz, 1 min. Test voltage: PROFINET interface 2 / 24 V communications voltage (U_L) feed-in: 1500 VAC, 50 Hz, 1 min. Test voltage: PROFINET interface 1 / functional ground: 1500 VAC, 50 Hz, 1 min. Test voltage: PROFINET interface 2 / functional ground: 1500 VAC, 50 Hz, 1 min. Test voltage: 24 V communications voltage (U_L) feed-in / functional ground: 500 VAC, 50 Hz, 1 min.
Connection data	Connection technology Connection name: AxiolineF connector Note on the connection method: Please observe the information provided on conductor cross sections in the âAxiolineF: system and installationâ user manual. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm AxiolineF connector Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the âAxiolineF: system and installationâ user manual. Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25 °C ... 60 °C (Mounting position: wall mounting on horizontal DIN rail) -25 °C ... 55 °C (Mounting position: any) Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -40 °C ... 85 °C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Standards and regulations	Protection class: III (IEC61140, EN61140, VDE0140-1)
Mounting	Mounting type: DIN rail mounting Mounting position: any (observe temperature derating)