| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/172c7c5767999646b422d3edebda44f8/-S204x204-FJPG
Width: 35 mm
Height: 126.1 mm
Depth: 54 mm
Note on dimensions: The depth applies when a TH35-7.5 DIN rail is used (in accordance with EN60715).
|
| Notes | Utilization restriction
EMC note: EMC: class A product, see manufacturer's declaration in the download area
|
| Interfaces | AxiolineFlocal bus
Number of interfaces: 2
Connection method: Bus base module
Transmission speed: 100 Mbps
|
| System properties | Module
Input address area: 8 Byte
Output address area: 8 Byte
Required parameter data: 7 Byte
Required configuration data: 6 Byte
|
| Input data | Analog
Input name: Analog inputs
Description of the input: Differential inputs, current
Number of inputs: 4
A/D conversion time: 31.25 µs
A/D converter resolution: 16 bit
Connection method: Push-in connection
Connection technology: 2-, 3-, 4-conductor
Note regarding the connection technology: shielded
Current input signal: 0 mA ... 20 mA
4 mA ... 20 mA
-20 mA ... 20 mA
Input resistance current input: 104 é (typical)
Data formats: IB IL, S7-compatible
Input filter: 30 Hz, 12 kHz and mean-value generation (can be parameterized)
Limit frequency (3 dB): 30 Hz
12 kHz
Measured value representation: 16 bits (15 bits + sign bit)
Protective circuit: Transient protection of inputs; Suppressor diode
Overload protection of the inputs; No; ±5.2VDC, maximum, Imax = 50mA
|
| Product properties | Type: block modular
Product type: I/O component
Product family: AxiolineF
Mounting position: any (no temperature derating)
Scope of delivery: including bus base module and AxiolineF connectors
Insulation characteristics
Overvoltage category: II (IEC 60664-1, EN60664-1)
Pollution degree: 2 (IEC 60664-1, EN60664-1)
|
| Electrical properties | Potentials
Power consumption: typ. 1.51 W (Device, total, plus the power consumption of the external sensors)
max. 1.83 W (Device, total, plus the power consumption of the external sensors)
Potentials: AxiolineF local bus supply (U
Supply voltage: 5 VDC (via bus base module)
Current draw: max. 150 mA
typ. 120 mA
Power consumption: max. 0.75 W
typ. 0.6 W
Potentials: Supply for analog modules (U
Supply voltage: 24 VDC (I/O supply and sensor supply)
Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple)
Current draw: max. 245 mA (IiS = 4 x 50 mA (full load))
max. 45 mA (IiS = 0 mA)
typ. 118 mA (IiS = 4 x 20 mA (nominal load))
max. 125 mA (IiS = 4 x 20 mA (nominal load))
typ. 238 mA (IiS = 4 x 50 mA (full load))
Power consumption: max. 5.88 W (Full load)
Protective circuit: Surge protection; electronic (35 V, 0.5 s)
Reverse polarity protection; up to HW02: polarity protection diodefrom HW03: parallel diode; with external 5A fuse (for startup only)
Transient protection; Suppressor diode
Supply:
Designation: Sensor supply UiS
Supply voltage: 24 VDC (from UA)
Current consumption: max. 50 mA (per channel)
Electrical isolation/isolation of the voltage ranges
Test voltage: 5V supply of the local bus (UBus) / 24V supply (I/Os): 500 VAC, 50 Hz, 1 min.
Test voltage: 5V supply of the local bus (UBus)/analog inputs: 500 VAC, 50 Hz, 1 min.
Test voltage: 5V supply of the local bus (UBus) / functional ground: 500 VAC, 50 Hz, 1 min.
Test voltage: 24 V supply (I/O)/analog inputs: 500 VAC, 50 Hz, 1 min.
Test voltage: 24V supply (I/O) / functional ground: 500 VAC, 50 Hz, 1 min.
Test voltage: Analog inputs/functional ground: 500 VAC, 50 Hz, 1 min.
|
| Connection data | Connection technology
Connection name: AxiolineF connector
Note on the connection method: Please observe the information provided on conductor cross sections in the âAxiolineF: system and installationâ user manual.
Conductor connection
Connection method: Push-in connection
Conductor cross section rigid: 0.2 mm² ... 1.5 mm²
Conductor cross section flexible: 0.2 mm² ... 1.5 mm²
Conductor cross section AWG: 24 ... 16
Stripping length: 8 mm
AxiolineF connector
Connection method: Push-in connection
Note on the connection method: Please observe the information provided on conductor cross sections in the âAxiolineF: system and installationâ user manual.
Conductor cross section, rigid: 0.2 mm² ... 1.5 mm²
Conductor cross section, flexible: 0.2 mm² ... 1.5 mm²
Conductor cross section AWG: 24 ... 16
Stripping length: 8 mm
|
| Environmental and real-life conditions | Ambient conditions
Ambient temperature (operation): -25°C ... 60°C (Standard, applications with UL approval, use in zone2 potentially explosive area)
-40°C ... 70°C (Extended, see section âTested successfully: use under extreme ambient conditionsâ in the data sheet.)
Degree of protection: IP20
Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level)
Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level)
Ambient temperature (storage/transport): -40°C ... 85°C
Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
|
| Standards and regulations | Protection class: III (IEC 61140, EN61140, VDE0140-1)
|
| Approvals | ATEX
Identification: ï II 3 G Ex ec IIC T4 Gc
Certificate: UL 20 ATEX 2441X
UKEX
Identification: ï II 3 G Ex ec IIC T4 Gc
Certificate: PxCIMA22UKEX2701949X
IECEx
Identification: Ex ec IIC T4 Gc
Certificate: IECEx ULD 20.0026X
UL, USA/Canada
Identification: cULus
Certificate: E238705
UL Ex, USA / Canada
Identification: Class I, Zone 2, AEx ec IIC T4
Class I, Division 2, Groups A, B, C, and D, T4
Ex ec IIC T4 Gc X
Certificate: E366272
CCC/China-Ex
Identification: Ex ec IIC T4 Gc
Certificate: ï¬, 2021122309114456
|
| Mounting | Mounting type: DIN rail mounting
Mounting position: any (no temperature derating)
|
Not available 
