Industrial Automation
SUBCON-PLUS-PROFIB - D-SUB bus connector
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Notes | Utilization restriction CCCex note: Use in potentially explosive areas is not permitted in China. |
Product properties | Product type: Data plug MTTF: 6706 Years (SN29500 standard, temperature25°C, operating cycle21%) 1817 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 155 Years (SN29500 standard, temperature40°C, operating cycle100%) Pin assignment: 3, 5, 6, 8 |
Electrical properties | Maximum power dissipation for nominal condition: 0.025 W Nominal voltage UN: 5 V Nominal current IN: 100 mA Transmission medium: Copper |
Connection data | D-SUB connection Connection method: D-SUB connector PCB connection Connection method: Spring-cage connection Stripping length: 5 mm Conductor cross section, rigid min.: 0.12 mm² Conductor cross section, rigid max.: 0.5 mm² Single-wire/terminal point, rigid AWG min.: 26 Single-wire/terminal point, rigid AWG max.: 20 |
Interfaces | Bus system: PROFIBUS DP Signal: PROFIBUS |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/4bafdcd80a9c0d458294db6be4985a0e/-S204x204-FJPG Width: 16 mm Height: 49.5 mm Length: 60 mm |
Material specifications | Material: ABS, metal-plated |
Cable/line | External cable diameter (): 7.6 mm ... 8.4 mm (Incoming bus line) |
Mechanical properties | Mechanical data Insertion/withdrawal cycles: > 200 |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP40 Ambient temperature (operation): -20°C ... 75°C Ambient temperature (storage/transport): -25°C ... 80°C Altitude: ⤠5000 m (For restrictions, see the manufacturer's declaration for altitude operation) Permissible humidity (operation): 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing) |
Approvals | EAC Identification: EAC ATEX Identification: ï II 3 G Ex nA IIC T4 Gc X Note: Please follow the special installation instructions in the documentation! Corrosive gas test Identification: ISA-S71.04-1985 G3 Harsh Group A |
Standards and regulations | Free from substances that could impair the application of coating: in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0 |
ECLASS | ECLASS-11.0: 27440302 ECLASS-13.0: 27440302 ECLASS-12.0: 27440302 |
ETIM | ETIM 9.0: EC001132 |
UNSPSC | UNSPSC 21.0: 39121400 |
Description other products