2744652 PHOENIX CONTACT - Technology Bsa

PSM-CABLE-PROFIB/FC - Bus system cable

By the meter, Bus system cable, PROFIBUS (12 Mbps), shielded, PVC FR VI/PVC, violet, 2-wire (1x2xAWG22/1), color single wire: red, green, cable length: Free entry (1.0 ... 1000.0 m)

Product Code: 2744652

Partner cod.: 2744652

PHOENIX CONTACT

Product properties	Product type: Data cable by the meter Sensor type: PROFIBUS Number of positions: 2 Shielded: yes
Electrical properties	Nominal voltage U_N: 48 VAC 60 VDC Transmission medium: Copper
Interfaces	Signal type/category: PROFIBUS, 12 Mbps
Cable/line	Cable length: Free entry (1.0 ... 1000.0 m) Cable weight: 80 kg/km UL AWM Style: 21694 (60°C / 600V) Wiring standards/regulations: Conductor material DINEN13602 Cu-ETP-A... Shielding material DINEN13602 Cu-ETP-A...-B Number of positions: 2 Shielded: yes Conductor structure: 1x2xAWG22/1 Signal speed: 0.81 c Conductor structure signal line: 1x 0.65 mm AWG signal line: 22 Conductor cross section: 2x 0.34 mm² Wire diameter incl. insulation: 2.55 mm External cable diameter: 8 mm ±0.4mm Outer sheath, material: PVC FR VI External sheath, color: violet Conductor material: Bare Cu wire Material wire insulation: PE Single wire, color: red, green Thickness, insulation: 0.95 mm Thickness, outer sheath: 0.9 mm Overall twist: 2 wires, twisted Optical shield covering: 55 % Insulation resistance: Ã¢¥ 16 GÃ©*km Loop resistance: Ã¢¤ 110.00 Ã©/km Cable capacity: approx. 28.5 nF/km (at 1 kHz) Ã¢¤ 1500 pF/km (asymmetrical: Conductor to ground) Cable impedance: 150 Ã© ±10% (3 ... 20 MHz) 185 Ã© ±10% (31.25 ... 38.4 kHz) 270 Ã© ±10% (9.6kHz) Test voltage: 3600 VDC (3 s) Smallest bending radius, fixed installation: Ã¢¥ 150 mm Tensile strength: Ã¢¤ 100 N Shield attenuation: Ã¢¤ 42 dB/km (at 16 MHz) Ã¢¤ 22 dB (at 4 ÃHz) Ã¢¤ 4 dB (at 38.4 kHz) Ã¢¤ 2.5 dB (at 9.6 kHz) Flame resistance: according to IEC 60332-3-24 (Cat. C ) according to CMGFT4 Resistance to oil: Limited resistance to mineral oils and greases according to IEC 60811-2-1, 4h at 70°C Other resistance: Cold bending resistance according to DINVDE0473 Part811-1-4 (after 16h at -40°C) UV resistant CL3 SUN RES Ambient temperature (operation): -40°C ... 60°C