Industrial Automation
FLT 60-400 - Type 1+2 combined lightning current and surge arrester
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | IEC test classification: I T1 EN type: T1 IEC power supply system: TN-S TN-C TT Type: DIN rail module, one-piece Product type: Combination type Number of positions: 1 Surge protection fault message: none Insulation characteristics Overvoltage category: III Pollution degree: 2 |
Electrical properties | Nominal frequency fN: 50 Hz (60Hz) |
Connection data | Connection method: Screw connection Screw thread: M6 Tightening torque: 8 Nm Stripping length: 17 mm Conductor cross section flexible: 16 mm² ... 35 mm² Conductor cross section rigid: 10 mm² ... 50 mm² Conductor cross section AWG: 6 ... 1 |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/947d4bfaa209fc479cdc5ae37737a6d8/-S204x204-FJPG Width: 35.5 mm Height: 90 mm Depth: 65.5 mm Horizontal pitch: 2 Div. |
Material specifications | Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA 6.6 Material group: I Housing material: PA 6.6 |
Mechanical properties | Mechanical data Open side panel: No |
Protective circuit | Mode of protection: L-PEN Direction of action: 1L-N/PE Nominal voltage UN: 230/400VAC (TN) 230/400VAC (TT) Nominal frequency fN: 50 Hz (60Hz) Maximum continuous voltage UC: 400 VAC Rated load current IL: 80 A Residual current IPE: < 0.1 mA Standby power consumption PC: ⤠40 mVA Nominal discharge current In (8/20) µs: 60 kA Impulse discharge current (10/350)µs, charge: 30 As Impulse discharge current (10/350)µs, specific energy: 900 kJ/é Impulse discharge current (10/350)µs, peak value limp: 60 kA Follow current interrupt rating Ifi: 2.5 kA Short-circuit current rating ISCCR: 2.5 kA Voltage protection level Up: ⤠5 kV Front of wave sparkover voltage at 6 kV (1.2/50) µs: ⤠5 kV TOV behavior at UT: 440 VAC (5s / withstand mode) 440 VAC (120min / withstand mode) Response time tA: ⤠100 ns Max. backup fuse with V-type through wiring: 80 A AC (gG) Max. backup fuse with branch wiring: 500 A AC (gG) |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 (only when all terminal points are used) Ambient temperature (operation): -40°C ... 85°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: ⤠2000 m (amsl) Permissible humidity (operation): 5 % ... 95 % |
Standards and regulations | Standards/specifications: IEC 61643-11 EN61643-11 Note: 2011 2012 |
Mounting | Mounting type: DIN rail: 35 mm |
ECLASS | ECLASS-11.0: 27130802 ECLASS-13.0: 27171201 |
ETIM | ETIM 9.0: EC000381 |
UNSPSC | UNSPSC 21.0: 39121600 |
Description other products