Not available 
| Product properties | IEC test classification: I T1 EN type: T1 IEC power supply system: TN-S TT Type: Male Product type: Replacement plug Number of positions: 1 Surge protection fault message: none Insulation characteristics Overvoltage category: III Pollution degree: 2 |
| Electrical properties | Nominal frequency fN: 50 Hz (60Hz) |
| Connection data | Connection method: pluggable |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/cb5e7c8ac0212c419989c1e36edcf286/-S204x204-FJPG Width: 35.5 mm Height: 44.8 mm Depth: 56.1 mm Horizontal pitch: 2 Div. |
| Material specifications | Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA 6.6/PBT Material group: I Housing material: PBT |
| Protective circuit | Mode of protection: N-PE Direction of action: N-PE Nominal voltage UN: 240VAC (TN - only N-PE) 240VAC (TT - only N-PE) Nominal frequency fN: 50 Hz (60Hz) Maximum continuous voltage UC: 260 VAC Residual current IPE: ⤠0.01 mA Nominal discharge current In (8/20) µs: 100 kA Impulse discharge current (10/350)µs, charge: 50 As Impulse discharge current (10/350)µs, specific energy: 2500 kJ/é Impulse discharge current (10/350)µs, peak value limp: 100 kA Follow current interrupt rating Ifi: 100 A (260 V AC) Voltage protection level Up: ⤠1.5 kV Residual voltage Ures: ⤠1.5 kV (at In) ⤠1 kV (at 10 kA) ⤠0.9 kV (at 5 kA) ⤠0.8 kV (at 3kA) Front of wave sparkover voltage at 6 kV (1.2/50) µs: ⤠1.5 kV TOV behavior at UT: 1200 VAC (200ms / withstand mode) Response time tA: ⤠100 ns |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: ⤠2000 m (amsl) Permissible humidity (operation): 5 % ... 95 % Shock (operation): 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation): 5g (5 - 500 Hz/2.5 h/X, Y, Z) |
| Standards and regulations | Air clearances and creepage distances Standards/regulations: EN60664-1 / IEC 60664-1 / IEC 61643-11 Standards/specifications: IEC 61643-11 EN61643-11 Note: 2011 2012 |
| Mounting | Mounting type: on base element |
| ECLASS | ECLASS-11.0: 27130890 ECLASS-13.0: 27171292 |
| ETIM | ETIM 9.0: EC002496 |
| UNSPSC | UNSPSC 21.0: 39121600 |
Description other products
