Industrial Automation
F-MS-T1/T2 50 - Lightning/surge arrester type 1/2
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | IEC test classification: I / II T1 / T2 I EN type: T1 / T2 IEC power supply system: TN-S Type: DIN rail module, two-section, divisible Product type: Arrester combination Product family: VALVETRAB MS Surge protection fault message: optical Insulation characteristics Overvoltage category: III Pollution degree: 2 |
Electrical properties | Nominal frequency fN: 50 Hz (60Hz) |
Connection data | Connection method: Screw connection Fork-type cable lug Screw thread: M5 Tightening torque: 3 Nm (1.5mm² ... 16mm²) 4.5 Nm (25mm²...35mm²) Stripping length: 16 mm Conductor cross section flexible: 1.5 mm² ... 25 mm² 1.5 mm² ... 16 mm² Conductor cross section rigid: 1.5 mm² ... 35 mm² Conductor cross section AWG: 15 ... 2 |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/94ddaf9126a00d4d8a824e39b1a3e71f/-S204x204-FJPG Width: 17.6 mm Height: 89.8 mm Depth: 77.5 mm (incl. DIN rail 7.5mm) Horizontal pitch: 1 Div. |
Material specifications | Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA 6.6/PBT Material group: I Housing material: PA 6.6 PBT |
Mechanical properties | Mechanical data Open side panel: No |
Protective circuit | Mode of protection: N-PE Direction of action: N-PE Nominal voltage UN: 240/415VAC (TN-S) Nominal frequency fN: 50 Hz (60Hz) Maximum continuous voltage UC: 264 VAC Rated load current IL: 80 A Residual current IPE: ⤠5 µA Standby power consumption PC: 1.3 mVA Nominal discharge current In (8/20) µs: 12.5 kA Maximum discharge current Imax (8/20) µs: 50 kA Impulse discharge current (10/350)µs, charge: 25 As Impulse discharge current (10/350)µs, specific energy: 625 kJ/é Impulse discharge current (10/350)µs, peak value limp: 50 kA Total discharge current Itotal (8/20)µs: 50 kA Total discharge current Itotal (10/350)µs: 50 kA Follow current interrupt rating Ifi: 100 A Voltage protection level Up: ⤠1.7 kV Residual voltage Ures: ⤠0.6 kV (at In) ⤠0.5 kV (at 10 kA) ⤠0.5 kV (at 5 kA) ⤠0.4 kV (at 3kA) Front of wave sparkover voltage at 6 kV (1.2/50) µs: ⤠1.7 kV TOV behavior at UT: 1200 VAC (200ms / withstand mode) Response time tA: ⤠100 ns |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 (only when all terminal points are used) Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: ⤠2000 m (amsl) Permissible humidity (operation): 5 % ... 95 % Shock (operation): 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation): 7.5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
Standards and regulations | Air clearances and creepage distances Standards/regulations: DINEN60664-1 Standards/specifications: IEC 61643-11 EN61643-11 Note: 2011 2012 |
Mounting | Mounting type: DIN rail: 35 mm |
ECLASS | ECLASS-11.0: 27130802 ECLASS-13.0: 27171201 |
ETIM | ETIM 9.0: EC000381 |
UNSPSC | UNSPSC 21.0: 39121600 |
Description other products