2801492 PHOENIX CONTACT - Technology Bsa

VAL-MS-AR-T1/T2 75/FM - Lightning/surge arrester type 1/2

The VAL-MS-AR T1/T2 75/FM is a high-capacity SPD for Type 1 lightning as well as Type 2 switching surge currents, ideal for applications with high load currents and high surge risk.
The VAL-MS BE-AR/FM base provides a disconnect that separates the field wire from the protected mode for field diagnosis and dry contacts for remote function monitoring. The base has independent input and output terminals on the same side with ground terminals on the opposite end. All terminals are high-current screw clamping for stripped or ferruled, solid or stranded wires.

Product Code: 2801492

Partner cod.: 2801492

PHOENIX CONTACT

Product properties	IEC test classification: I / II T1 / T2 T1 I EN type: T1 / T2 T1 Type: DIN rail module, two-section, divisible Product type: Surge protection for NEMA power supply units Product family: VALVETRAB MS Surge protection fault message: Optical, remote indicator contact
Electrical properties	Nominal voltage U_N: 60 VDC Nominal current I_N: 76 A (at 30°C ambient temperature) Indicator/remote signaling Connection name: Remote fault indicator contact Switching function: Changeover contact, 1-pos. Maximum operating voltage U_max. AC: 250 VAC Max. operating current I_max: 1.5 A AC (250VAC) 1.5 ADC (30VDC)
Connection data	Connection method: Screw terminal block Tightening torque: 3 Nm ... 4.5 Nm (Ground) 1.5 Nm ... 1.8 Nm (House) 2.5 Nm ... 3 Nm (Field) Conductor cross section flexible: 1.5 mm² ... 35 mm² (16 mm strip length) 0.5 mm² ... 15 mm² (10 mm strip length) 1.5 mm² ... 25 mm² (14 mm strip length) Conductor cross section rigid: 1.5 mm² ... 35 mm² (16 mm strip length) 0.5 mm² ... 15 mm² (10 mm strip length) 1.5 mm² ... 25 mm² (14 mm strip length) Conductor cross section AWG: 15 ... 2 (16 mm strip length) 20 ... 6 (10 mm strip length) 12 ... 4 (14 mm strip length) Remote fault indicator contact Connection method: Screw connection Screw thread: M2 Tightening torque, min: 0.25 Nm Tightening torque: 2 lb_f-in. ... 4 lb_f-in. (UL) Stripping length: 7 mm Conductor cross section flexible min.: 0.14 mm² Conductor cross section flexible max.: 1.5 mm² Conductor cross section, rigid min.: 0.14 mm² Conductor cross section, rigid max.: 1.5 mm²
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/3d2624b96e5d834ea94309feabec99e7/-S204x204-FJPG Width: 17.7 mm Height: 160 mm Depth: 77.5 mm
Material specifications	Flammability rating according to UL 94: V0 Housing material: PA
Protective circuit	Direction of action: L-L / L-PE Maximum continuous voltage U_C: 75 VDC Maximum continuous operating voltage U_C(L-N): 75 VDC Rated load current I_L: 55 A (with 6 AWG) Nominal discharge current I_n (8/20) µs: 12.5 kA Maximum discharge current I_max (8/20) µs: 50 kA Total discharge current I_total(8/20)µs: 50 kA Total discharge current I_total (10/350)µs: 12.5 kA Voltage protection level U_p: Ã¢¤ 0.7 kV Total surge current (10/350) µs: 15 kA Total surge current (8/20) µs: 50 kA Max. backup fuse with branch wiring: 160 A
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 (when disconnect closed) IP20 Ambient temperature (operation): -40°C ... 80°C Altitude: max. 3000 m Permissible humidity (operation): 5 % ... 95 % Permissible humidity (storage/transport): 5 % ... 95 % Shock (operation): 10g Vibration (operation): 2g (0Hz... 200Hz)
Mounting	Mounting type: DIN rail mounting with additional retaining screw