Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access B2B
Log in to your account

Access services

Enter your reserved area

Access B2B
Log in to your account
Country|
||
PHOENIX CONTACT 2804416
PHOENIX CONTACTNot available

VAL-CP-MOSO 60-3C-FM - Type 2 surge arrester

Combination of type 2 surge protection and arrester backup fuse, with arrester monitoring, in combination with a diagnostic and status indicator and remote indication contact. Design: 4-conductor system (L1, L2, L3, PEN), mounting on 60 mm system technology (power rail system)
Product Code: 2804416
Partner cod.: 2804416
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Download
Tecnichal data
Product propertiesIEC test classification: II
T2
EN type: T2
IEC power supply system: TN-C
TT
Type: Module for 60 mm system technology
Product type: Surge arrester
Number of positions: 3
Surge protection fault message: Optical, remote indicator contact
Insulation characteristics
Overvoltage category: III
Pollution degree: 2
Electrical propertiesNominal frequency fN: 50 Hz (60Hz)
Nominal voltage UN: 240 VAC (230/400 V AC ... 240/415 V AC)
Indicator/remote signaling
Connection name: Remote fault indicator contact
Switching function: Changeover contact
Operating voltage: 5 VAC ... 250 VAC
125 VDC (200 mA DC)
Operating current: 5 mA AC ... 1 A AC
1 ADC (30VDC)
Connection dataPEN conductor connection
Connection method: Screw connection
Screw thread: M5
Tightening torque: 4.5 Nm
Stripping length: 16 mm
Conductor cross section flexible: 2.5 mm² ... 16 mm²
Conductor cross section rigid: 2.5 mm² ... 25 mm²
Conductor cross section AWG: 12 ... 4
Phase conductor connection
Connection method: 60 mm power rail system
Remote fault indicator contact
Connection method: Pluggable screw connection
Screw thread: M2
Tightening torque: 0.25 Nm
Stripping length: 7 mm
Conductor cross section flexible: 0.14 mm² ... 1.5 mm²
Conductor cross section rigid: 0.14 mm² ... 1.5 mm²
Conductor cross section AWG: 28 ... 16
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/991179eb9229a64a9610ae6ebbe50b38/-S204x204-FJPG
Width: 54 mm
Height: 220 mm
Depth: 134 mm
Material specificationsFlammability rating according to UL 94: V-0
CTI value of material: 600
Insulating material: PBT, PA6, PA66
Material group: I
Housing material: PBT
PA 6
PA 6.6
Protective circuitMode of protection: L-PEN
Direction of action: 3L-PEN
Nominal voltage UN: 240/415VAC (TN-C)
240/415VAC (TT)
Nominal frequency fN: 50 Hz (60Hz)
Maximum continuous voltage UC: 350 VAC
Nominal discharge current In (8/20) µs: 20 kA
Maximum discharge current Imax (8/20) µs: 25 kA
Short-circuit current rating ISCCR: 25 kA
Voltage protection level Up: ≤ 2.5 kV
Residual voltage Ures: ≤ 2.1 kV (at In)
≤ 1.9 kV (at 10 kA)
≤ 1.8 kV (at 5 kA)
≤ 1.7 kV (at 3kA)
TOV behavior at UT: 415 VAC (5s / withstand mode)
440 VAC (120min / safe failure mode)
Response time tA: ≤ 25 ns
Max. backup fuse with branch wiring: not required
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP20
Ambient temperature (operation): -25°C ... 55°C
Ambient temperature (storage/transport): -40°C ... 75°C
Altitude: ≤ 2000 m (amsl)
Permissible humidity (operation): 5 % ... 95 %
Standards and regulationsAir clearances and creepage distances
Standards/regulations: DINVDE0110-1 / IEC 60664-1 / IEC 61643-11
Standards/specifications: IEC 61643-11
EN61643-11
Note: 2011
2012
MountingMounting type: 60 mm system technology (power rail)
Technical Specs
ECLASSECLASS-11.0: 27130805
ECLASS-13.0: 27171202
ETIMETIM 9.0: EC000941
UNSPSCUNSPSC 21.0: 39121600
Description
Combination of type 2 surge protection and arrester backup fuse, with arrester monitoring, in combination with a diagnostic and status indicator and remote indication contact. Design: 4-conductor system (L1, L2, L3, PEN), mounting on 60 mm system technology (power rail system)
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Flyer_00002.pdf

Flyer_00001.pdf

Manufacturer_declaration_00533.pdf

Package_slip_00455.pdf