Industrial Automation
MACX MCR-SL-CAC- 5-I-UP - Current transducers
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
Product properties | Product type: Current transducer Insulation characteristics Overvoltage category: III Pollution degree: 2 |
Electrical properties | Maximum power dissipation for nominal condition: < 0.9 W (24VDC) < 3.4 W (230 V AC) Protective circuit: Surge protection; 35V suppressor diode Step response (10-90%): ⤠300 ms 200 ms Maximum temperature coefficient: < 0.02 %/K Temperature coefficient, typical: < 0.015 %/K Maximum transmission error: ⤠0.5 % (of nominal range value under nominal conditions) Reverse polarity protection: yes Rated insulation voltage: 300 VAC (to earth) Electrical isolation Input/output Test voltage: 4 kV AC (50Hz, 60s) Electrical isolation Output/supply Test voltage: 2 kV AC (50Hz, 60s) Supply Supply voltage range: 19.2 V AC/DC ... 253 V AC/DC Max. current consumption: < 33 mA (24VDC) Power consumption: < 0.8 W (24VDC) |
Input data | Measurement Configurable/programmable: Via DIP switches Input current range: 0 A AC ... 1 A AC (configurable) 0 A AC ... 5 A AC (configurable) Voltage input signal: ⤠300 VAC Input impedance: < 50 mé Overload capacity: 2 x IN (continuous) Surge strength: 20 x IN (1 s) Nominal frequency fN: 50 Hz Frequency measuring range: 45 Hz ... 65 Hz Curve type: Sine |
Output data | Signal: Current Configurable/programmable: Via DIP switches Non-load voltage: 15 V Current output signal: 0 mA ... 20 mA (configurable) 4 mA ... 20 mA (configurable) Max. current output signal: 25 mA Load/output load current output: < 500 é (20mA) Ripple: < 10 mVPP (500é/20mA) Status display: LED red (error), LED green (ready) |
Connection data | Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14 |
Interfaces | Data communication (bypass) Limit frequency (3 dB): approx. 3 Hz |
Dimensions | Item dimensions Width: 22.5 mm Height: 104 mm Depth: 114.5 mm |
Material specifications | Housing material: Polyamide PA non-reinforced |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -20°C ... 65°C -4°F ... 149°F Ambient temperature (storage/transport): -40°C ... 85°C (-40°F...185°F) Altitude: ⤠2000 m Permissible humidity (operation): 10 % ... 95 % (non-condensing) |
Approvals | CE Certificate: CE-compliant ATEX Identification: ï II 3 G Ex nA IIC T4 Gc X UKCAEx(UKEX) Identification: ï II 3 G Ex nA IIC T4 Gc Certificate: PxCIF21UKEX2810638X UL, USA/Canada Identification: UL508 Recognized EACEx Identification: ï 2Ex nA IIC T4 Gc Certificate: BY/112 02.01 TP012 103.01 00078 |
EMC data | Noise immunity: EN 61000-6-2 Note: When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 Electrostatic discharge Standards/regulations: EN61000-4-2 Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldâ Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)â Comments: Criterion B Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)â Comments: Criterion B Conducted interference Standards/regulations: EN61000-4-6 |
Mounting | Mounting type: DIN rail mounting Mounting position: any |
ECLASS | ECLASS-11.0: 27210123 ECLASS-13.0: 27210123 ECLASS-12.0: 27210123 |
ETIM | ETIM 9.0: EC002475 |
UNSPSC | UNSPSC 21.0: 39121000 |
Description other products