Industrial Automation
PACT RCP-4000A-UIRO-PT-D95 - Current transformer
The signal conditioner outputs 8 different standard signals on the output side and has one switching output.
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product type: Current transformer Insulation characteristics Overvoltage category: II Pollution degree: 2 |
Electrical properties | Electrical isolation: Reinforced insulation in accordance with IEC 61010-1 Typical measuring error: < 1 % Protective circuit: Surge protection; 33V suppressor diode Step response (0â99%): 110 ms Rated insulation voltage: 300 V Measuring coil Conductor structure signal line: 2x 0.22 mm (Signal (tinned)) 1x 0.22 mm (Shielding (tinned)) Insulation: double insulation Rated insulation voltage: 1000 VAC (rms CAT III) 600 VAC (rms CAT IV) Test voltage: 10.45 kV DC (60 s) Basic accuracy: <± 0.2 % Measuring transducers Maximum transmission error: ⤠0.5 % (From the range end value) Frequency range: 16 Hz ... 1000 Hz Test voltage: 3 kV (50Hz, 1min.) General Can be calibrated: no Class: 1 Accuracy class: 1 Converter type: Rogowski coil and 4-way signal conditioner Supply: Measuring transducers Nominal supply voltage: 24 VDC Nominal supply voltage range: 9.6 VDC ... 30 VDC Power consumption: ⤠1 W (at IOUT = 20 mA, 9.6 V DC, 600 é load) |
Input data | Frequency Designation: Measuring coil Frequency measuring range: 40 Hz ... 20000 Hz Position error: <± 0.1 % (typical) Linearity error: < 0.1 % Signal Input signal (at 50 Hz): 100 mV (1000 A) Curve type: Sine Input impedance: > 100 ké Current transformers Configurable/programmable: Via DIP switches Rated frequency: Standard converter: 40 Hz ... 20000 Hz Primary rated current Ipn: 0 A AC ... 100 A AC 0 A AC ... 250 A AC 0 A AC ... 400 A AC 0 A AC ... 630 A AC 0 A AC ... 1000 A AC 0 A AC ... 1500 A AC 0 A AC ... 2000 A AC 0 A AC ... 4000 A AC Can be calibrated: no Class: 1 Accuracy class: 1 Converter type: Rogowski coil and 4-way signal conditioner |
Output data | Switching: Transistor Number of outputs: 1 Contact switching type: 1 N/O contact Minimum switching voltage: 1 V Maximum switching voltage: 30 VDC Min. switching current: 100 µA Max. switching current: 100 mA (at 30 V) Signal Designation: Measuring coil Output signal (at 50 Hz): 100 mV (no load, at 1,000 A) Output voltage (in no-load operation): VOUT = M * dI/dt Output voltage (sinusoidal, in no-load operation): 100 mV (VOUT = 2 * à * M * f * I (M = 0.318 üH; example: At 50 Hz; I = 1,000 A)) Accuracy class: 1 Signalâ Designation: Measuring transducer Configurable/programmable: Yes Voltage output signal: 0 V ... 10 V (via DIP switch) 2 V ... 10 V (via DIP switch) 0 V ... 5 V (via DIP switch) 1 V ... 5 V (via DIP switch) 0 V ... 10.5 V (can be set via software) Max. voltage output signal: ï» 12.3 V Current output signal: 0 mA ... 20 mA (via DIP switch) 4 mA ... 20 mA (via DIP switch) 0 mA ... 10 mA (via DIP switch) 2 mA ... 10 mA (via DIP switch) 0 mA ... 21 mA (can be set via software) Max. current output signal: 24.6 mA Load/output load voltage output: ⥠10 ké Load/output load current output: ⤠600 é (20mA) Ripple: < 20 mVPP |
Connection data | Measuring transducer side Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 12 |
Dimensions | Item dimensions Width: 6.2 mm Height: 110.5 mm Depth: 120.5 mm Measuring coil Length: 300 mm Diameter: 8.3 mm ±0.2mm Measuring coil when installed Diameter: 95 mm Signal line Length: 3 m Width: 6.2 mm Height: 110.5 mm Depth: 120.5 mm |
Material specifications | Coil material: Elastollan Housing material: PC PBT |
Environmental and real-life conditions | Ambient conditions Measuring coil degree of protection: IP67 (not assessed by UL) Measuring transducer degree of protection: IP20 Ambient temperature (operation): -30°C ... 80°C (Measuring coil) -40°C ... 70°C (Measuring transducer) Ambient temperature (storage/transport): -40°C ... 80°C (Measuring coil) -40°C ... 85°C (Measuring transducer) Altitude: < 2000 m Permissible humidity (operation): 5 % ... 95 % (non-condensing) |
Approvals | CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant CMIM Certificate: CMIM-compliant UL, USA/Canada Identification: UL 61010 Recognized Note: Measuring coil UL, USA/Canadaâ Identification: UL 508 Listed Note: Measuring transducer |
EMC data | Noise immunity: EN 61000-6-2 Note: When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 |
Standards and regulations | Electrical isolation: Reinforced insulation in accordance with IEC 61010-1 Standards/regulations: IEC 61010-1 IEC 61010-2-032 |
Mounting | Mounting type: DIN rail mounting |
ECLASS | ECLASS-11.0: 27210902 ECLASS-13.0: 27210902 ECLASS-12.0: 27210902 |
ETIM | ETIM 9.0: EC002048 |
UNSPSC | UNSPSC 21.0: 39121000 |
Description other products