Industrial Automation
MCR-S10-50-UI-DCI-NC - Current transducers
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
Product properties | Product type: Current transducer Insulation characteristics Overvoltage category: III Pollution degree: 2 |
Electrical properties | Total error: ⤠1.5 % (Temperature range) Maximum power dissipation for nominal condition: 2.2 W Measuring category: III Test voltage output/power supply: 500 VAC (50Hz, 60s) Test voltage input/output: 4 kV AC (50Hz, 60s) Test voltage input/power supply: 4 kV AC (50Hz, 60s) Protective circuit: Surge protection; 33V suppressor diode Step response (10-90%): 330 ms (AC) 40 ms (DC) Temperature coefficient, typical: < 0.025 %/K Maximum transmission error: < 0.5 % (of nominal range value under nominal conditions) Rated insulation voltage: 300 VAC (to earth) Supply Supply voltage range: 20 VDC ... 30 VDC Max. current consumption: < 40 mA (without load) |
Input data | Signal Supply voltage: 24 VDC Measurement Configurable/programmable: Yes, unconfigured Input current range: 0 A AC/DC ... 55 A AC/DC (Permitted continuous overload: 120%) Current measuring range: 0 A AC/DC ... 50 A AC/DC Setting range for min. input current: 0 A AC/DC ... 9.5 A AC/DC Setting range for max. input current: 0 A AC/DC ... 55 A AC/DC LSB: Current: 1 µA (1A) 2 µA (2A) 5 µA (5A) 10 µA (10A) 50 µA (50A) 100 µA (100A) Overload capacity: Depending on through connected conductor Surge strength: Depending on through connected conductor Frequency measuring range: 15 Hz ... 400 Hz Curve type: AC, DC or distorted currents Operate threshold: 0.8 % (of measuring range nominal value 50 A) |
Output data | Signal: Voltage/current Configurable/programmable: Yes, unconfigured Voltage output signal: 0 V ... 5 V 1 V ... 5 V 0 V ... 10 V 2 V ... 10 V -5 V ... 5 V -10 V ... 10 V 10 V ... 0 V 10 V ... 2 V 10 V ... -10 V 5 V ... 0 V 5 V ... 1 V 5 V ... -5 V Current output signal: 0 mA ... 20 mA 4 mA ... 20 mA 20 mA ... 0 mA 20 mA ... 4 mA Load/output load voltage output: > 10 ké Load/output load current output: < 500 é |
Connection data | Connection method: Screw connection Through connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14 |
Signaling | Status display: Green LED |
Dimensions | Item dimensions Width: 22.5 mm Height: 99 mm Depth: 114.5 mm Circular conductor Diameter: 10.5 mm |
Material specifications | Housing material: Polyamide PA non-reinforced |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -20°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: < 2000 m Permissible humidity (operation): 10 % ... 95 % (non-condensing) |
Approvals | CE Certificate: CE-compliant UL, USA/Canada Identification: Class I, Zone 2, AEx nA nC IIC T4, Ex nA nC IIC T4 Gc X Class I, Div. 2, Groups A, B, C and D or Non-Hazardous Locations Only |
EMC data | Low Voltage Directive: Conformance with Low Voltage Directive Noise immunity: EN 61000-6-2 Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 |
Standards and regulations | Standards/regulations: IEC 61010-2-030 |
Mounting | Mounting type: DIN rail mounting Mounting position: any |
ECLASS | ECLASS-11.0: 27210123 ECLASS-12.0: 27210123 ECLASS-13.0: 27210123 |
ETIM | ETIM 9.0: EC002475 |
UNSPSC | UNSPSC 21.0: 39121000 |
Description other products