2859686 PHOENIX CONTACT - Technology Bsa

FLT-CP-N/PE-350-ST - Type 1 surge protection plug

Type 1 / Class I / B arrester (lightning current arrester) replacement plug for path N-PE, can be combined with FLASHTRAB compact series of products.

Product Code: 2859686

Partner cod.: 2859686

PHOENIX CONTACT

Product properties	IEC test classification: I / II T1 / T2 EN type: T1 / T2 IEC power supply system: TN TT Type: Male Product type: Replacement plug Number of positions: 1 Surge protection fault message: optical Insulation characteristics Overvoltage category: III Pollution degree: 2
Electrical properties	Nominal frequency f_N: 50 Hz (60Hz)
Connection data	Connection method: pluggable
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/23008288b0735347a2c6b4c9e2f0c07b/-S204x204-FJPG Width: 35.45 mm Height: 46.6 mm Depth: 56.4 mm Horizontal pitch: 2 Div.
Material specifications	Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA 6.6/PBT Material group: I Housing material: PBT
Protective circuit	Mode of protection: N-PE Direction of action: N-PE Nominal voltage U_N: 240VAC (TN - only N-PE) 240VAC (TT - only N-PE) Nominal frequency f_N: 50 Hz (60Hz) Maximum continuous voltage U_C: 350 VAC Residual current I_PE: Ã¢¤ 0.01 mA Nominal discharge current I_n (8/20) µs: 100 kA Impulse discharge current (10/350)µs, charge: 50 As Impulse discharge current (10/350)µs, specific energy: 2500 kJ/Ã© Impulse discharge current (10/350)µs, peak value l_imp: 100 kA Follow current interrupt rating I_fi: 100 A (350 V AC) Voltage protection level U_p: Ã¢¤ 1.5 kV Residual voltage U_res: Ã¢¤ 1.5 kV (at I_n) Ã¢¤ 1 kV (at 10 kA) Ã¢¤ 0.9 kV (at 5 kA) Ã¢¤ 0.8 kV (at 3kA) Front of wave sparkover voltage at 6 kV (1.2/50) µs: Ã¢¤ 1.5 kV TOV behavior at U_T: 1200 VAC (200ms / withstand mode) Response time t_A: Ã¢¤ 100 ns
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: Ã¢¤ 2000 m (amsl) Permissible humidity (operation): 5 % ... 95 % Shock (operation): 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation): 5g (5 - 500 Hz/2.5 h/X, Y, Z)
Approvals	UL specifications Maximum continuous operating voltage MCOV (N-G): 264 VAC Nominal discharge current I_n (N-G): 20 kA Mode of protection: N-G Power distribution system: Split phase Nominal frequency: 50/60 Hz Measured limiting voltage MLV (N-G): 1080 V Follow current (L-G): 200 A (264 VAC) SPD Type: 4CA
Standards and regulations	Air clearances and creepage distances Standards/regulations: EN60664-1 / IEC 60664-1 / IEC 61643-11 Standards/specifications: IEC 61643-11 EN61643-11 Note: 2011 2012
Mounting	Mounting type: on base element