Industrial Automation
IB IL 24 MUX MA-PAC - Bus coupler


Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/8f49d2b498684640a945b59e148b2698/-S204x204-FJPG Width: 48.8 mm Height: 135 mm Depth: 71.5 mm |
Interfaces | Remote bus Connection method: Inline shield connector Transmission physics: RS-485 Inline local bus Connection method: Inline data jumper Transmission speed: 500 kbps |
System properties | System limits Number of local bus devices that can be connected: 32 (without additional power terminal block, observe allowable total current consumption) Number of devices with parameter channel: 0 Number of supported branch terminals with remote bus branch: 0 Module ID code (hex): none |
Output data | Relay Contact switching type: N/C contact Contact connection type: floating contacts Switching voltage: typ. 24 VÃDC max. 150 V max. 125 VÃAC Switching current: max. 1 A Switching capacity: max. 30 W max. 60 VA |
Product properties | Type: modular Product type: I/O component Product family: Inline Insulation characteristics Overvoltage category: II Pollution degree: 2 (in accordance with EN 50178) |
Electrical properties | Protective circuit: Surge protection (segment supply, main supply, field multiplexer supply); Input protective diodes (can be destroyed by permanent overload)Pulse loads up to 1500ÃW are short circuited by the input protective diode. Protection against polarity reversal (segment supply/main supply); Parallel diodes for protection against polarity reversal; in the event of an error the high current flowing through the diodes causes the fuse connected upstream to blow. Protection against polarity reversal (field multiplexer supply); Serial diode in the lead path of the power supply unit; in the event of an error only a low current flows. In the event of an error, no fuse trips within the external power supply unit. Potentials: Field multiplexer supply U Supply voltage: 24 VÃDC (via Inline connector) Supply voltage range: 19.2 VÃDC ... 30 VÃDC (including all tolerances, including ripple) Current draw: max. 1.25 A (with max. number of connected I/O terminal blocks) typ. 60 mA (without connected Inline I/O terminals) Potentials: Communications power (U Supply voltage: 7.5 VÃDC ñ5Ã% Potentials: Supply of analog modules (U Supply voltage: 24 VÃDC (via Inline connector) Supply voltage range: 19.2 VÃDC ... 30 VÃDC (including all tolerances, including ripple) Potentials: Main circuit supply (U Supply voltage: 24 VÃDC (via voltage jumper) Supply voltage range: 19.2 VÃDC ... 30 VÃDC (including all tolerances, including ripple) Potentials: Segment circuit supply (U Supply voltage: 24 VÃDC (via voltage jumper) Supply voltage range: 19.2 VÃDC ... 30 VÃDC (including all tolerances, including ripple) Electrical isolation/isolation of the voltage ranges Test voltage: RS-485 interface / supply voltage: 500 VÃAC Test voltage: RS-485 interface / local bus: 500 VÃAC |
Connection data | Connection technology Connection name: Inline connector Conductor connection Connection method: Spring-cage connection Conductor cross section rigid: 0.08 mm² ... 1.5 mm² Conductor cross section flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm Inline connector Connection method: Spring-cage connection Conductor cross section, rigid: 0.08 mm² ... 1.5 mm² Conductor cross section, flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm |
Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -25°C ... 55°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Ambient temperature (storage/transport): -25°C ... 85°C Permissible humidity (operation): 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 10 % ... 95 % (non-condensing) |
Standards and regulations | Protection class: III (IEC 61140, ENÃ61140, VDEÃ0140-1) |
Mounting | Mounting type: DIN rail mounting |
Description other products