Not available 
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/20a984302842e949b5ce7beb58df3766/-S204x204-FJPG Width: 24.4 mm Height: 135 mm Depth: 71.5 mm |
| Notes | Utilization restriction CCCex note: Use in potentially explosive areas is not permitted in China. |
| Interfaces | Inline local bus Number of interfaces: 2 Connection method: Inline data jumper Transmission speed: 500 kbps RS-485, RS-422 Number of interfaces: 1 (be operated simultaneously) Connection method: Spring-cage connection Note on the connection method: Use shielded cables. Transmission speed: 110 bps ... 38400 bps (can be parameterized) Transmission physics: Copper Protocols supported: Transparent, end-to-end, XON/XOFF, dual buffer, 3964R, Movilink Termination resistor: typ. 120 é (active, integrated) Data bits: 7 or 8 Stop bits: 1 or 2 Input buffer: 4 kByte Output buffer: 1 kByte |
| System properties | Module ID code (dec.): 191 ID code (hex): BF Length code (hex): 06 Length code (dec): 06 Process data channel: 96 bit Input address area: 12 Byte Output address area: 12 Byte Register length: 96 bit Required parameter data: 1 Byte Required configuration data: 5 Byte |
| Product properties | Type: modular Product type: I/O component Product family: Inline Scope of delivery: including Inline connectors and marking fields Operating mode: Process data mode with 6 words Insulation characteristics Overvoltage category: II (IEC 60664-1, EN60664-1) Pollution degree: 2 (IEC 60664-1, EN60664-1) |
| Electrical properties | Maximum power dissipation for nominal condition: max. 2 W Potentials Power consumption: max. 2 W (at UL, within the permissible operating temperature) Potentials: Communications power (U Supply voltage: 7.5 VDC (via voltage jumper) Current draw: max. 260 mA (all connections of the serial interface are short-circuited) typ. 170 mA Power consumption: typ. 1.275 W Electrical isolation/isolation of the voltage ranges Test voltage: RS-485/422 interface / 7.5 V supply (bus logics): 500 VAC, 50 Hz, 1 min. Test voltage: RS-485/422 interface / 24 V supply (I/O): 500 VAC, 50 Hz, 1 min. Test voltage: RS-485/422 interface/functional ground: 500 VAC, 50 Hz, 1 min. Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O): 500 VAC, 50 Hz, 1 min. Test voltage: 7.5V supply (bus logic)/functional ground: 500 VAC, 50 Hz, 1 min. Test voltage: 24V supply (I/O) / functional ground: 500 VAC, 50 Hz, 1 min. |
| Connection data | Connection technology Connection name: Inline connector Conductor connection Connection method: Spring-cage connection Conductor cross section rigid: 0.08 mm² ... 1.5 mm² Conductor cross section flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm Inline connector Connection method: Spring-cage connection Conductor cross section, rigid: 0.08 mm² ... 1.5 mm² Conductor cross section, flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm |
| Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -25°C ... 55°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -25°C ... 85°C Permissible humidity (operation): 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 10 % ... 95 % (non-condensing) |
| Standards and regulations | Protection class: III (IEC 61140, EN61140, VDE0140-1) |
| Mounting | Mounting type: DIN rail mounting |
| ECLASS | ECLASS-11.0: 27242605 ECLASS-12.0: 27242605 ECLASS-13.0: 27242608 |
| ETIM | ETIM 9.0: EC001601 |
| UNSPSC | UNSPSC 21.0: 32151600 |
Description other products
