Not available 
| Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
| Product properties | Product type: Signal duplicator Product family: MINI Analog No. of channels: 2 Configuration: DIP switches Insulation characteristics Overvoltage category: II Pollution degree: 2 |
| System properties | Functionality Configuration: DIP switches |
| Electrical properties | No. of channels: 2 Rated insulation voltage: 50 V AC/DC Electrical isolation: Basic insulation in accordance with EN 61010 Electrical isolation between input and output: yes Limit frequency (3 dB): approx. 35 Hz Maximum power dissipation for nominal condition: 500 mW Test voltage (Input/output/supply): 1.5 kV AC (50Hz, 60s) Protective circuit: Transient protection Step response (0â99%): ï» 10 ms Maximum temperature coefficient: < 0.01 %/K Temperature coefficient, typical: < 0.004 %/K Maximum transmission error: ⤠0.2 % (of final value) Transmission error, typical: < 0.1 % Supply Nominal supply voltage: 24 VDC Supply voltage range: 19.2 VDC ... 30 VDC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN60715) Max. current consumption: < 30 mA (at 24 V DC incl. load) Power consumption: < 600 mW |
| Input data | Signal: Voltage/current Number of inputs: 1 Configurable/programmable: Yes, unconfigured Voltage input signal: 0 V ... 10 V (please indicate if different setting when ordering) 1 V ... 5 V Max. voltage input signal: 30 V Current input signal: 0 mA ... 20 mA 4 mA ... 20 mA Max. current input signal: 50 mA Input resistance of voltage input: approx. 100 ké Input resistance current input: approx. 50 é |
| Output data | Signal: Current Number of outputs: 2 Configurable/programmable: Yes, unconfigured Non-load voltage: 9 V Current output signal: 0 mA ... 20 mA 4 mA ... 20 mA Max. current output signal: approx. 22 mA Load/output load current output: ⤠250 é (at 20 mA) Ripple: < 20 mVPP (at 250 é) |
| Connection data | Connection method: Screw connection Stripping length: 12 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 12 |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/8450693c9d67004aa7841c306225c8da/-S204x204-FJPG Width: 6.2 mm Height: 93.1 mm Depth: 101.2 mm |
| Material specifications | Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 2 Housing material: PBT |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -20°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: ⤠2000 m Permissible humidity (operation): 5 % ... 95 % (non-condensing) |
| Approvals | CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant UL, USA/Canada Identification: UL508 Recognized Class I, Div. 2, Groups A, B, C, D T5 Shipbuilding approval Certificate: DNV GL TAA00002R0 DNV GL data Temperature: B Humidity: B Vibration: B EMC: A Enclosure: Required protection according to the Rules shall be provided upon installation on board |
| EMC data | Noise immunity: EN 61000-6-2 Note: When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeâ Comments: Safety measures must be taken to prevent electrostatic discharge. Electromagnetic HF field Designation: Electromagnetic RF field Standards/regulations: EN61000-4-3 Typical deviation from the measuring range final value: 5 % Fast transients (burst) Designation: Fast transients (burst) Standards/regulations: EN61000-4-4 Typical deviation from the measuring range final value: 5 % Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)â Comments: Criterion B Conducted interference Designation: Conducted interferences Standards/regulations: EN61000-4-6 Typical deviation from the measuring range final value: 5 % |
| Standards and regulations | Electrical isolation: Basic insulation in accordance with EN 61010 |
| Mounting | Mounting type: DIN rail mounting Assembly instructions: The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35mm EN60715 DIN rail. Mounting position: any |
| ECLASS | ECLASS-11.0: 27210120 ECLASS-12.0: 27210120 ECLASS-13.0: 27210120 |
| ETIM | ETIM 9.0: EC002653 |
| UNSPSC | UNSPSC 21.0: 39121000 |
Description other products
