Industrial Automation
MINI MCR-SL-2CP-I-I - Loop-powered isolators
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product type: Passive isolators Product family: MINI Analog No. of channels: 2 Insulation characteristics Overvoltage category: II Pollution degree: 2 |
Electrical properties | No. of channels: 2 Electrical isolation: 2-way isolation Electrical isolation between input and output: yes Limit frequency (3 dB): 75 Hz Maximum power dissipation for nominal condition: 64 mW Signal transmission behavior: In=Out Step response (10-90%): 5 ms (at 600 é load) Maximum temperature coefficient: ⤠0.002 %/K (of measured value / 100 é load) Temperature coefficient, typical: < 0.002 %/K (of measured value / 100 é load) Maximum transmission error: ⤠0.1 % (of final value) Additional error, load-dependent: < 0.03 % (of measured value / 100 é load) Electrical isolation Input/output Rated insulation voltage: 50 V AC/DC Test voltage: 1.5 kV AC (50Hz, 60s) Insulation: Basic insulation in accordance with IEC/EN61010 Supply Supply voltage range: loop-powered, no external supply necessary Power consumption: 34 mW (per channel) |
Input data | Signal: Current Number of inputs: 2 Configurable/programmable: no Max. voltage input signal: 18 V Current input signal: 0 mA ... 20 mA 4 mA ... 20 mA Max. current input signal: 40 mA Response current: approx. 190 µA Input voltage limitation: < 2 V (20mA) Voltage dissipation: 1.9 V (I = 20 mA) |
Output data | Signal: Current Number of outputs: 2 Configurable/programmable: no Current output signal: 0 mA ... 20 mA 4 mA ... 20 mA Load/output load current output: < 600 é (at I = 20 mA output signal) Ripple: < 10 mVrms (600é) |
Connection data | Connection method: Screw connection Stripping length: 12 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 12 |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/8450693c9d67004aa7841c306225c8da/-S204x204-FJPG Width: 6.2 mm Height: 93.1 mm Depth: 101.2 mm |
Material specifications | Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 2 Housing material: PBT |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -20°C ... 65°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: ⤠2000 m Permissible humidity (operation): 5 % ... 95 % (non-condensing) |
Approvals | CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant UL, USA/Canada Identification: UL508 Recognized Class I, Div. 2, Groups A, B, C, D Shipbuilding approval Certificate: DNV GL TAA00000BW DNV GL data Temperature: B Humidity: B Vibration: B EMC: B Enclosure: A |
EMC data | Noise immunity: EN 61000-6-2 Note: When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeâ Comments: Criterion B Electromagnetic HF field Designation: Electromagnetic RF field Standards/regulations: EN61000-4-3 Evaluation criterion: A Fast transients (burst) Designation: Fast transients (burst) Standards/regulations: EN61000-4-4 Evaluation criterion: B Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)â Comments: Criterion B Conducted interference Designation: Conducted interferences Standards/regulations: EN61000-4-6 Evaluation criterion: A |
Standards and regulations | Electrical isolation: 2-way isolation |
Mounting | Mounting type: DIN rail mounting Assembly instructions: The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35mm EN60715 DIN rail. Mounting position: any |
ECLASS | ECLASS-11.0: 27210120 ECLASS-12.0: 27210120 ECLASS-13.0: 27210120 |
ETIM | ETIM 9.0: EC002653 |
UNSPSC | UNSPSC 21.0: 39121000 |
Description other products