Industrial Automation
Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
Product properties | Product type: Repeater power supplies Product family: MACX Analog Application: Analog IN No. of channels: 1 Type: Signal conditioners with SIL functional safety Configuration: DIP switches |
Electrical properties | No. of channels: 1 Electrical isolation: 3-way isolation Electrical isolation between input and output: yes Signal transmission behavior: In=Out Step response (10-90%): < 600 µs (for 4 mA ... 20 mA step) Maximum temperature coefficient: < 0.01 %/K Maximum transmission error: < 0.1 % (of final value) Transmission error, typical: < 0.05 % (of final value) Electrical isolationâ Test voltage: 2.5 kV AC (50Hz, 60s) Overvoltage category: II Pollution degree: 2 Electrical isolation Input/output/power supply IEC/EN61010-1 Standards/regulations: IEC/EN61010-1 Rated insulation voltage: 300 Vrms Insulation: Safe isolation Supply Designation: Repeater power supply operation Nominal supply voltage range: 24 V AC/DC ... 230 V AC/DC -20%...+10% (50/60Hz) Supply voltage range: 19.2 V AC/DC ... 253 V AC/DC (50/60Hz) Max. current consumption: < 75 mA (24VDC / 20mA) Power dissipation: < 1.6 W (24VDC / 20mA) Power consumption: < 1.9 W Supplyâ Designation: Signal conditioner operation Nominal supply voltage range: 24 V AC/DC ... 230 V AC/DC -20%...+10% (50/60Hz) Supply voltage range: 19.2 V AC/DC ... 253 V AC/DC (50/60Hz) Max. current consumption: < 45 mA (24VDC / 20mA) Power dissipation: < 1.1 W (24VDC / 20mA) Power consumption: < 1.1 W |
Input data | Signal: Repeater power supply operation Description of the input: Active current input Number of inputs: 1 Current input signal: 4 mA ... 20 mA Transmitter supply voltage: > 16 V (20mA) > 15.3 V (22.5 mA) Signal: Signal conditioner operation Description of the input: Passive current input Current input signal: 0 mA ... 20 mA 4 mA ... 20 mA Voltage drop: < 3.5 V (in input isolating amplifier operation) |
Output data | Signal: Repeater power supply operation Output description: Current output (active and passive) Number of outputs: 1 Voltage output signal: 1 V ... 5 V (internal resistance, 250 é, 0.1%) Configurable via DIP switches Current output signal: 4 mA ... 20 mA (active) 4 mA ... 20 mA (14 ... 26 V ext. source voltage) Load/output load current output: < 600 é (20mA) < 525 é (22.5 mA) Output ripple: < 20 mVrms Output behavior in the event of an error: 0 mA (Cable break in the input) ⥠22.5 mA (Cable short-circuit in the input) Signal: Signal conditioner operation Output description: Current output (active and passive) Voltage output signal: 0 V ... 5 V (internal resistance, 250 é, 0.1%) 1 V ... 5 V (internal resistance, 250 é, 0.1%) Current output signal: 0 mA ... 20 mA (active) 4 mA ... 20 mA (active) 0 mA ... 20 mA (14 ... 26 V ext. source voltage) 4 mA ... 20 mA (14 ... 26 V ext. source voltage) Load/output load current output: < 600 é (20mA) < 525 é (22.5 mA) Output ripple: < 20 mVrms Output behavior in the event of an error: 0 mA (Cable break in the input) 0 mA (Cable short-circuit in the input) |
Connection data | Connection method: Screw connection Stripping length: 7 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14 Tightening torque: 0.5 Nm ... 0.6 Nm Test socket Max. diameter: 2 mm |
Ex data | Ex installation (EPL): Gc Div.2 |
Interfaces | Data communication (bypass) HART function: Yes Protocols supported: HART-transparent |
Signaling | Status display: Green LED (supply voltage) |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/1c258931fba07944af0146676a5cf2c7/-S204x204-FJPG Width: 17.5 mm Height: 112.5 mm Depth: 113.7 mm Depth NS35/7,5: 114.5 mm (Snapped onto DIN rail NS35/7,5 in accordance with EN60715) |
Material specifications | Flammability rating according to UL 94: V0 (Housing) Housing material: PA 6.6-FR |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 (not assessed by UL) Ambient temperature (operation): -40°C ... 60°C (Any mounting position) -40°C ... 70°C (Derating) Ambient temperature (storage/transport): -40°C ... 80°C Permissible humidity (operation): 10 % ... 95 % (non-condensing) Altitude range (⤠2000 m) Altitude: ⤠2000 m (The technical data refers to altitudes â¤2000m above mean sea level. For altitudes >2000m above mean sea level, refer to the data sheet.) Ambient temperature (operation): -40°C ... 60°C -40°C ... 70°C (Derating) Rated insulation voltage: 375 VPP (Power supply, input / output) Altitude range (⤠3000 m) Height range: > 2000 m ... 3000 m Ambient temperature (operation): -40°C ... 54°C -40°C ... 63°C (Derating) Rated insulation voltage: 190 VAC (Power supply, input / output) 110 VDC (Power supply, input / output) Altitude range (⤠4000 m) Height range: > 3000 m ... 4000 m Ambient temperature (operation): -40°C ... 48°C -40°C ... 56°C (Derating) Rated insulation voltage: 60 V AC/DC (Power supply, input / output) Altitude range (⤠5000 m) Height range: > 4000 m ... 5000 m Ambient temperature (operation): -40°C ... 42°C -40°C ... 49°C (Derating) Rated insulation voltage: 60 V AC/DC (Power supply, input / output) |
Approvals | CE Certificate: CE-compliant Note: and EN61326-1 ATEX Identification: ï II 3 G Ex ec IIC T4 Gc X Certificate: PxCIF08ATEX2865968X UKCAEx(UKEX) Identification: ï II 3 G Ex nA IIC T4 Gc Certificate: PxCIF21UKEX2865968X IECEx Identification: Ex ec IIC T4 Gc Certificate: IECEx BVS 08.0035X UL, USA/Canada Identification: UL508 Listed UL 61010 Listed Class I, Div. 2, Groups A, B, C, D T4 Class I, Zone 2, Group IIC T4 Safety Integrity Level (SIL / SILCL, IEC 61508) Identification: 2 Certificate: ZP/C031/20 Systematic Capability (SC / SILCL) Identification: 3 |
EMC data | Noise immunity: EN 61000-6-2 Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 |
Standards and regulations | Electrical isolation: 3-way isolation |
Mounting | Mounting type: DIN rail mounting |
ECLASS | ECLASS-11.0: 27210120 ECLASS-12.0: 27210120 ECLASS-13.0: 27210120 |
ETIM | ETIM 9.0: EC002653 |
UNSPSC | UNSPSC 21.0: 39121000 |
Description other products