Industrial Automation
EMD-SL-PTC - Monitoring relay
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
Product properties | Product type: Temperature monitoring relay Operating mode: 100% operating factor Mechanical service life: approx. 2x 107 cycles Insulation characteristics Insulation: Basic insulation Insulation characteristicsâ Insulation: Basic insulation Overvoltage category: III Pollution degree: 2 |
Electrical properties | Service life electrical: 2x 105 cycles at ohmic load, 1000 VA Rated insulation voltage: 300 V Rated surge voltage: 4 kV Supply Supply voltage range: 24 VAC ... 230 VAC (see Power modules) 24 VDC (see Power modules) Nominal power consumption: 2 VA (1.5W) |
Input data | Input name: Measuring input Maximum input voltage: 7.5 VDC (connection terminal blocks: T1 and T2) Frequency range: 50 Hz ... 60 Hz Maximum temperature coefficient: < 0.1 %/K Response value: ⥠3.6 ké (Relay drops out) Function: Winding temperature monitoring Basic accuracy: ± 10 % (of scale end value) Repeat accuracy: ⤠2 % Total cold resistance: < 1.5 ké Release value: ⤠1.8 ké (Relay picks up) Short-circuit detection: < 20 é Voltage influence: ⤠1 % Recovery time: 500 ms Control Connection name: Connection of an external reset button (floating controlled N/O contact) Load capacity: Cannot carry load Cable length: max. 10 m |
Output data | Switching Contact switching type: 2 floating changeover contacts Maximum switching voltage: 250 VAC (in acc. with IEC 60664-1) Interrupting rating (ohmic load) max.: 750 VA (3 A/250 V AC, module aligned, ⤠5 mm spacing) 1250 VA (5 A/250 V AC, module not aligned, ⥠5 mm spacing) Output fuse: 5 A (fast-blow) |
Connection data | Connection method: Screw connection Stripping length: 8 mm Conductor cross section rigid: 0.5 mm² ... 2.5 mm² Conductor cross section flexible: 0.25 mm² ... 2.5 mm² Conductor cross section AWG: 20 ... 14 |
Dimensions | Width: 22.5 mm Height: 90 mm Depth: 113 mm |
Material specifications | Housing insulation material: Polyamide PA, self-extinguishing |
Environmental and real-life conditions | Ambient conditions Degree of protection (Housing): IP40 (Housing) Degree of protection (Connection terminal blocks): IP20 (Connection terminal blocks) Ambient temperature (operation): -25°C ... 55°C -25°C ... 40°C (corresponds to UL508) Ambient temperature (storage/transport): -25°C ... 70°C Climatic class: 3K3 (in acc. with EN 60721) Permissible humidity (operation): 15 % ... 85 % |
Approvals | CE Certificate: CE-compliant UL, USA/Canada Identification: UL/C-UL Listed UL 508 |
EMC data | Low Voltage Directive: Conformance with Low Voltage Directive Noise immunity: EN 61000-6-2 Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-3 |
Standards and regulations | Standards/regulations: EN50178 |
Mounting | Mounting type: DIN rail mounting Assembly instructions: on standard DIN rail NS 35 in accordance with EN 60715 Mounting position: any |
ECLASS | ECLASS-11.0: 27371810 ECLASS-12.0: 27371810 ECLASS-13.0: 27371810 |
ETIM | ETIM 9.0: EC001446 |
UNSPSC | UNSPSC 21.0: 41112100 |
Description other products