2866284 PHOENIX CONTACT - Technology Bsa

MINI-PS- 12- 24DC/24DC/1 - DC/DC converter

Please use the following items in new systems: 1066703, 1066716, 1066718, 1066714.
Primary-switched MINI DC/DC converter for DIN rail mounting, input: 12-24VDC, output: 24VDC/1A

Product Code: 2866284

Partner cod.: 2866284

PHOENIX CONTACT

Input data	DC operation Nominal input voltage range: 12 VDC ... 24 VDC Input voltage range: 10 VDC ... 32 VDC Wide-range input: yes Input voltage range DC: 10 VDC ... 32 VDC Voltage type of supply voltage: DC Inrush current: < 15 A (typical) Inrush current integral (I²t): 1.8 A²s Frequency range DC: 0 Hz Mains buffering time: typ. 3 ms (12VDC) typ. 20 ms (24VDC) Current consumption: 2.6 A (12VDC) 1.3 A (24VDC) Typical response time: < 0.5 s Input fuse: 6.3 A (slow-blow, internal)
Output data	Efficiency: > 83 % (at 24 V DC and nominal values) Output characteristic: U/I Nominal output voltage: 24 VDC ±1% Setting range of the output voltage (U_Set): 22.5 VDC ... 28.5 VDC (> 24 VDC, constant capacity restricted) Nominal output current (I_N): 1 A (-25°C...60°C) Derating: 60°C ... 70°C (2.5%/K) Residual ripple: < 30 mV_PP (20MHz) Output power: 24 W Peak switching voltages nominal load: < 100 mV_PP (20MHz) Maximum no-load power dissipation: < 1.2 W Power loss nominal load max.: < 5 W Connection in parallel: yes, for assembling redundant systems and increasing efficiency Connection in series: yes Signal: DC OK active Output description: U_OUT > 21.5 V: High signal Maximum switching voltage: Ã¢¤ 24 VDC Output voltage: + 24 V (Signal) Continuous load current: Ã¢¤ 20 mA
Connection data	Input Connection method: Pluggable screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 14 Stripping length: 7 mm Screw thread: M3 Output Connection method: Pluggable screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 14 Stripping length: 7 mm Screw thread: M3 Signal Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 14 Screw thread: M3 Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm
Signaling	Types of signaling: LED Active switching output Operating voltage display: Green LED Signal output: DC OK active Status display: "DC OK" LED green
Electrical properties	Number of phases: 1.00 Insulation voltage input/output: 1.5 kV (type test) 1 kV (routine test)
Product properties	Product type: DC/DC converters MTBF (IEC 61709, SN 29500): > 2569000 h (40°C) Insulation characteristics Protection class: III
Dimensions	Width: 22.5 mm Height: 99 mm Depth: 107 mm Installation dimensions Installation distance right/left: 0 mm / 0 mm (Ã¢¤ 70°C) Installation distance top/bottom: 50 mm / 50 mm (Ã¢¤ 70°C)
Mounting	Assembly instructions: alignable: horizontally 0mm, vertically 50mm Mounting position: horizontal DIN rail NS 35, EN 60715 With protective coating: No
Material specifications	Housing material: Plastic Type of housing: Polyamide PA, color: green
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 70°C (>60°C Derating: 2,5%/K) Ambient temperature (storage/transport): -40°C ... 85°C Max. permissible relative humidity (operation): Ã¢¤ 95 % (at 25°C, non-condensing)
Standards and regulations	Rail applications: EN50121-4 Standard Ã¢ Electronic equipment for use in electrical power installations and their assembly into electrical power installations: EN50178/VDE0160 (PELV) Standard - Electrical safety: EN60950-1/VDE0805 (SELV) Standard - Safe isolation: DINVDE0100-410 DINVDE0106-101
Approvals	Shipbuilding approval: DNVGL(EMCA) UL approvals: UL/C-UL listed UL508 UL/C-UL Recognized UL60950-1 UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
EMC data	Low Voltage Directive: Conformance with Low Voltage Directive 2014/35/EC EMC requirements for noise emission: EN61000-6-3 EN61000-6-4 EMC requirements for noise immunity: EN61000-6-1 EN61000-6-2 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Noise emission: EN 55011 (EN 55022) Electrostatic discharge Standards/regulations: EN61000-4-2 Housing: > Level 3 Electrostatic dischargeÃ¢ Contact discharge: 8 kV (Contact discharge) Discharge in air: 8 kV (Air discharge) Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldÃ¢ Frequency range: 80 MHz ... 3 GHz Test field strength: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)Ã¢ Input: 4 kV (level 4 - asymmetrical: conductor to ground) Output: 2 kV (level 3 - asymmetrical: conductor to ground) Signal: 1 kV Comments: Level 2 - asymmetrical cable to ground Surge voltage load (surge) Standards/regulations: EN61000-4-5 Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceÃ¢ Input/Output: Level 3 Frequency range: 0.15 MHz ... 80 MHz (10V) Voltage dips Standards/regulations: EN61000-4-11 Emitted interference Standards/regulations: EN61000-6-3 Radio interference voltage in acc. with EN 55011: EN55011 (EN55022) ClassB, area of application: Industry and residential Emitted radio interference in acc. with EN 55011: EN 55011 (EN 55022) Class B, area of application: Industry and residential