2884208 PHOENIX CONTACT - Technology Bsa

Notes	Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
Product properties	Type: Block design Product type: Wireless module Product family: Inline Application: I/O MTTF: 1458 Years (SN29500 standard, temperature25°C, operating cycle21%) 557 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 219 Years (SN29500 standard, temperature40°C, operating cycle100%) MTBF: 465 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) 140 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day)) Diagnostics messages: Short-circuit or overload of the digital outputs LED Wireless connection FS LED Logic and actuator voltage LED Link quality of the wireless connection 4 LEDs Insulation characteristics Overvoltage category: II Pollution degree: 2 Times Switch-on time: Ã¢¤ 3 s (Until the wireless connection is established) Delay time: Ã¢¤ 10 ms (Latency, typical) Ã¢¤ 800 ms (Failsafe function for wireless interruption)
Electrical properties	Maximum power dissipation for nominal condition: 2.4 W Supply: Module electronics Connection method: Inline connector Supply voltage: 24 VDC Supply voltage range: 19.2 VDC ... 30.5 VDC (via power connector) Current consumption: 60 mA (Communications power at 24VDC, 25°C) 25 mA (Actuator supply, +load current Digital OUT (8A)) Protective circuit: Polarity protection, surge protection
Input data	Analog Input name: Analog inputs Description of the input: Single ended Number of inputs: 2 Current input signal: 0 mA ... 20 mA Input resistance current input: 50 Ã© Voltage input signal: 0 V ... 10 V Input resistance of voltage input: 130 kÃ© Measured value resolution: 12 bits Protective circuit: Surge voltage; Suppressor diodes in the analog inputs, current limitation via internal protective circuit Digital Input name: Digital inputs Number of inputs: 16 Connection method: Spring-cage connection Connection technology: 1-conductor Input voltage range "0" signal: < 5 V Input voltage range "1" signal: > 15 V Nominal input voltage U_IN: 24 VDC Typical input current per channel: 2.3 mA Input frequency: Ã¢¤ 10 Hz
Output data	Analog Output name: Analog outputs Number of outputs: 2 Protective circuit: Transient protection DAC resolution: 12 bit Current output signal: 0 mA ... 20 mA Load/output load current output: Ã¢¤ 500 Ã© Voltage output signal: 0 V ... 10 V Load/output load voltage output: Ã¢¥ 2 kÃ© Digital Output name: Digital outputs Connection method: Spring-cage connection Connection technology: 1-conductor Number of outputs: 16 Protective circuit: Short-circuit protection, overload protection, protected against reverse voltages Output current: 8 A (Total) Maximum output current per channel: 500 mA Nominal output voltage: 24 VDC Output current when switched off: Ã¢¤ 10 µA (When not loaded, a voltage can be measured even at an output that is not set.) Nominal load, inductive: 12 VA (1.2 H, 50 Ã©) Nominal load, lamp: 12 W Nominal load, ohmic: 12 W (48Ã©) Reverse voltage resistance to short pulses: Reverse voltage proof Behavior with overload: Auto restart Behavior with inductive overload: Output can be destroyed Behavior at voltage switch-off: The output follows the power supply without delay Overcurrent shut-down: Ã¢¥ 0.7 A
Connection data	Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible [AWG]: ... 16 Stripping length: 8 mm
Interfaces	Functions Wireless licenses: Europe, additional countries in the e-shop Wireless Modulation type: GFSK (Gaussian Frequency Shift Keying) Antenna connection method: RSMA (female) No. of channels: 40 Frequency range: 2.402 GHz ... 2.48 GHz (ISM bandwidth) Frequency band: 2.4 GHz Wireless standard: Bluetooth Transmission power: 5 dBm Receiver sensitivity: -95 dBm
Signaling	Diagnostic messages Diagnostics: Short-circuit or overload of the digital outputs Message: LED Diagnostic messagesÃ¢ Diagnostics: Wireless connection Message: FS LED Diagnostic messagesÃ¢Ã¢ Diagnostics: Logic and actuator voltage Message: LED Diagnostic messagesÃ¢Ã¢Ã¢ Diagnostics: Link quality of the wireless connection Message: 4 LEDs
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/b75b7e6989bb754c938d0c7ccf57a062/-S204x204-FJPG Width: 95 mm Height: 123.4 mm Depth: 57 mm Note on dimensions: with connectors
Material specifications	Material: PA 6.6-FR
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C Degree of protection: IP20 Air pressure (operation): 795 hPa ... 1080 hPa (up to 2000m above sea level) Air pressure (storage/transport): 66 kPa ... 108 kPa (up to 3500m above sea level) Ambient temperature (storage/transport): -25°C ... 85°C Permissible humidity (operation): 95 % (non-condensing) Permissible humidity (storage/transport): 95 %
Approvals	CE Certificate: CE-compliant EAC Identification: EAC UL, USA/Canada Identification: 508 Listed Wireless approval, Europe Note: RED 2014/53/EU Wireless approval USA, FCC Identification: YG3ADIOMUX Note: FCC directive, part 15.247 Wireless approval India, WPC Certificate: NR-ETA/5957 Wireless approval Japan, MIC Identification: Japan MIC (RF) ID:202-LSF002 Wireless approval Canada, IC Certificate: 4720B-ADIOMUX Note: ISC directive RSS 210 Wireless approval Mexico, IFT Certificate: IFT RCPPHIL19-2130 Wireless approval South Africa, ICASA Certificate: TA-2006/032 KC approval for South Korea Certificate: MSIP-CRI-PCK-2884208
EMC data	Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeÃ¢ Contact discharge: ± 6 kV (Test Level 3) Discharge in air: ± 8 kV (Test Level 3) Indirect discharge: ± 6 kV Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldÃ¢ Frequency range: 26 MHz ... 3 GHz (Test Level 3) Field intensity: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)Ã¢ Input: ± 2 kV (Test Level 3) Signal: ± 2 kV (Signal line) Comments: Criterion B Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)Ã¢ Input: ± 0.5 kV (symmetrical) ± 1 kV (asymmetrical) Signal: ± 1 kV (Signal line, asymmetrical) Comments: Criterion B Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceÃ¢ Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V Emitted interference Emitted radio interference in acc. with EN 55011: EN55016-2-3 Class A industrial applications Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.
Standards and regulations	Protection class: III Free from substances that could impair the application of coating: in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0 Standard designation: RED directive 2014/53/EU Standards/specifications: EN300328 EN61000-6-4 EN61000-6-2 EN62311 EN60950
Mounting	Mounting type: DIN rail mounting