Industrial Automation
Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
Product properties | Product type: Relay Module Insulation characteristics Insulation: Basic insulation Insulation characteristics: Air clearances and creepage distances, input/output Insulation: Basic insulation Overvoltage category: III Pollution degree: 2 |
Electrical properties | Air clearances and creepage distances, input/output Rated insulation voltage: 250 V Rated surge voltage: 4 kV (1.2/50 üs) |
Input data | Coil side Nominal input voltage UN: 24 VDC Input voltage range: 19.2 VDC ... 26.4 VDC (20°C) Typical input current at UN: 10 mA Protective circuit: Bridge rectifier; Bridge rectifier, varistor Capacitor; Capacitor Operating voltage display: LED |
Output data | Switching Contact switching type: 1 N/C contact Contact material: AgSnO2, gold-plated Note: A 680 é resistor is connected in series and a 3.3 ké resistor is connected parallel to the output Maximum switching voltage: 30 VAC Limiting continuous current: max. 3 A |
Connection data | Input Connection method: Screw connection Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 14 Output Connection method: Screw connection Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 26 ... 14 |
Dimensions | Width: 17.8 mm Height: 90 mm Depth: 61 mm |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Degree of protection (Installation location): ⥠IP54 (Installation location) Ambient temperature (operation): -20°C ... 50°C |
Standards and regulations | Air clearances and creepage distances, input/output Standards/regulations: EN50178 |
Mounting | Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any |
Description other products