| Notes | Utilization restriction
EMC note: EMC: class A product, see manufacturer's declaration in the download area
|
| Product properties | Product type: Signal conditioner
Product family: MINI Analog Pro
No. of channels: 1
Type: Signal conditioner
Configuration: DIP switches
Software
App
Insulation characteristics: GBStandard
Overvoltage category: II
Pollution degree: 2
|
| Electrical properties | No. of channels: 1
Electrical isolation: 4-way isolation
Electrical isolation between input and output: yes
Step response (0â99%): 140 ms (15 Hz sample rate)
45 ms (60Hz sample rate)
25 ms (240Hz sample rate, can only be set via software)
Maximum temperature coefficient: 0.01 %/K
Temperature coefficient, typical: 0.01 %/K
Maximum transmission error: 0.1 % (of final value)
Electrical isolation Input/output/power supply
Rated insulation voltage: 300 Vrms
Test voltage: 3 kV AC (50Hz, 60s)
Insulation: Reinforced insulation according to IEC/EN61010-1
Supply
Nominal supply voltage: 24 VDC
Supply voltage range: 9.6 VDC ... 30 VDC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN60715)
Typical current consumption: 32 mA (24VDC)
63 mA (12VDC)
Power consumption: ⤠1 W (at IOUT = 20 mA, 9.6 V DC, 600 é load)
|
| Input data | Signal: Voltage/current
Number of inputs: 1
Configurable/programmable: Yes
Voltage input signal: 0 V ... 10 V (via DIP switch)
2 V ... 10 V (via DIP switch)
0 V ... 5 V (via DIP switch)
1 V ... 5 V (via DIP switch)
10 V ... 0 V (via DIP switch)
10 V ... 2 V (via DIP switch)
5 V ... 0 V (via DIP switch)
5 V ... 1 V (via DIP switch)
0 V ... 12 V (can be set via software)
Max. voltage input signal: 12 V
Current input signal: 0 mA ... 20 mA (via DIP switch)
4 mA ... 20 mA (via DIP switch)
0 mA ... 10 mA (via DIP switch)
2 mA ... 10 mA (via DIP switch)
20 mA ... 0 mA (via DIP switch)
20 mA ... 4 mA (via DIP switch)
10 mA ... 0 mA (via DIP switch)
10 mA ... 2 mA (via DIP switch)
0 mA ... 24 mA (can be set via software)
Max. current input signal: 24 mA
Input resistance of voltage input: > 120 ké
Input resistance current input: approx. 50 é (+0.7V for test diode)
|
| Output data | Switching: Transistor
Number of outputs: 1
Contact switching type: 1 N/O contact
Minimum switching voltage: 1 V
Maximum switching voltage: 30 VDC
Min. switching current: 100 µA
Max. switching current: 100 mA (at 30 V)
Signal: Voltage/current
Number of outputs: 1
Configurable/programmable: Yes
Voltage output signal: 0 V ... 10 V (via DIP switch)
2 V ... 10 V (via DIP switch)
0 V ... 5 V (via DIP switch)
1 V ... 5 V (via DIP switch)
0 V ... 10.5 V (can be set via software)
Max. voltage output signal: approx. 12.3 V
Current output signal: 0 mA ... 20 mA (via DIP switch)
4 mA ... 20 mA (via DIP switch)
0 mA ... 10 mA (via DIP switch)
2 mA ... 10 mA (via DIP switch)
0 mA ... 21 mA (can be set via software)
Max. current output signal: 24.6 mA
Load/output load voltage output: ⥠10 ké
Load/output load current output: ⤠600 é (at 20 mA)
Ripple: < 20 mVPP (at 600 é)
|
| Connection data | Connection method: Push-in connection
Stripping length: 10 mm
Conductor cross section rigid: 0.2 mm² ... 2.5 mm² (with ferrule)
0.14 mm² ... 2.5 mm² (without ferrule)
Conductor cross section flexible: 0.14 mm² ... 2.5 mm²
Conductor cross section AWG: 24 ... 12 (flexible)
|
| Ex data | Ex installation (EPL): Gc
Div.2
|
| Interfaces | Data: IFS interface
Connection method: Micro USB type B
|
| Signaling | Status display: Green LED (supply voltage)
Yellow LED (switching output)
Error indication: Red LED
|
| Dimensions | Width: 6.2 mm
Height: 109.81 mm
Depth: 119.2 mm
|
| Material specifications | Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 2
Housing material: PBT
|
| Environmental and real-life conditions | Ambient conditions
Degree of protection: IP20 (not assessed by UL)
Ambient temperature (operation): -40°C ... 70°C
Ambient temperature (storage/transport): -40°C ... 85°C
Altitude: ⤠2000 m
Permissible humidity (operation): 5 % ... 95 % (non-condensing)
|
| Approvals | CE
Certificate: CE-compliant
ATEX
Identification: ï II 3 G Ex ec IIC T4 Gc
Certificate: BVS 19 ATEX E 083 X
UKCAEx(UKEX)
Identification: ï II 3 G Ex ec IIC T4 Gc
Certificate: PxCIF21UKEX2905026X
IECEx
Identification: Ex ec IIC T4 Gc
Certificate: IECEx BVS 19.0072X
CCC/China-Ex
Identification: Ex nA IIC T4 Gc
Certificate: NEPSIGYJ21.1123X
UL, USA/Canada
Identification: UL508 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC T6
Shipbuilding approval
Certificate: DNV GL TAA000021E Rev. 1
EACEx
Identification: ï 2Ex ec IIC T4 Gc
Certificate: BY/112 02.01 TP012 103.01 00079
DNV GL data
Temperature: B
Humidity: B
Vibration: A
EMC: A
Enclosure: Required protection according to the Rules shall be provided upon installation on board
|
| EMC data | Noise immunity: EN 61000-6-2
Note: When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility: Conformance with EMC directive
Noise emission: EN 61000-6-4
Electrostatic discharge
Standards/regulations: EN61000-4-2
Electrostatic dischargeâ
Comments: Safety measures must be taken to prevent electrostatic discharge.
Electromagnetic HF field
Designation: Electromagnetic RF field
Standards/regulations: EN61000-4-3
Typical deviation from the measuring range final value: 0.2 %
Fast transients (burst)
Designation: Fast transients (burst)
Standards/regulations: EN61000-4-4
Typical deviation from the measuring range final value: 0.1 %
Surge current load (surge)
Standards/regulations: EN61000-4-5
Conducted interference
Designation: Conducted interferences
Standards/regulations: EN61000-4-6
Typical deviation from the measuring range final value: 2.8 %
|
| Standards and regulations | Electrical isolation: 4-way isolation
GBStandard
Standards/regulations: GB3836.1
GB3836.8
|
| Mounting | Mounting type: DIN rail mounting
Assembly instructions: The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35mm EN60715 DIN rail.
Mounting position: any
|
Not available 
