Not available 
| Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
| Product properties | Product type: Limit value switch Product family: MINI Analog Pro No. of channels: 1 Type: Signal conditioner Configuration: DIP switches Software App Insulation characteristics: GBStandard Overvoltage category: II Pollution degree: 2 |
| System properties | Functionality Configuration: DIP switches Software App |
| Electrical properties | No. of channels: 1 Electrical isolation between input and output: yes Switching point accuracy: < 0.1 % Step response (0â99%): 140 ms (can be set via software) Maximum temperature coefficient: 0.01 %/K Maximum transmission error: 0.1 % (of final value) Electrical isolation Input/output/power supply Rated insulation voltage: 300 Vrms Test voltage: 3 kV AC (50Hz, 60s) Insulation: Reinforced insulation according to IEC/EN61010-1 Supply Nominal supply voltage: 24 VDC Supply voltage range: 9.6 VDC ... 30 VDC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN60715) Typical current consumption: 40 mA (12VDC) 20 mA (24VDC) Power consumption: ⤠0.5 W |
| Input data | Signal: Voltage/current Configurable/programmable: Yes Voltage input signal: 0 V ... 10 V (via DIP switch) 0 V ... 12 V (can be set via software) Max. voltage input signal: 12 V Current input signal: 0 mA ... 20 mA (via DIP switch) 0 mA ... 24 mA (can be set via software) Max. current input signal: 24 mA Input resistance of voltage input: > 120 ké Input resistance current input: 50 é (+0.7V for test diode) Specification of the switching point: Can be set via software or in steps via DIP switches |
| Output data | Switching: Relay Contact switching type: 1changeover contact Contact material: AgSnO2, hard gold-plated Maximum switching voltage: 250 VAC 30 VDC 240 VAC (UL) Limiting continuous current: 6 A AC 4 ADC Min. switching current: 100 mA (12VDC) Max. switching current: 6 A AC (250VAC) 4 ADC (30VDC) Mechanical service life: 2x 107 cycles Setting range of the response delay: 0 s ... 10 s (can be set freely via software) Internal hysteresis: can be set freely via software |
| Connection data | Connection method: Screw connection Stripping length: 10 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 1.5 mm² (with ferrule) 0.14 mm² ... 2.5 mm² (without ferrule) Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 (flexible) Tightening torque: 0.5 Nm ... 0.6 Nm |
| Ex data | Ex installation (EPL): Gc Div.2 |
| Interfaces | Data: IFS interface Connection method: Micro USB type B |
| Signaling | Status display: Green LED (supply voltage) Yellow LED (switching output) Error indication: Red LED |
| Dimensions | Width: 6.2 mm Height: 109.81 mm Depth: 119.2 mm |
| Material specifications | Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 2 Housing material: PBT |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 (not assessed by UL) Ambient temperature (operation): -40°C ... 70°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: ⤠2000 m Permissible humidity (operation): 5 % ... 95 % (non-condensing) |
| Approvals | CE Certificate: CE-compliant ATEX Identification: ï II 3G Ex ec ic nC IIC T4 Gc Certificate: BVS 18 ATEX E 071 X UKCAEx(UKEX) Identification: ï II 3 G Ex ec ic IIC T4 Gc Certificate: PxCIF21UKEX2905632X IECEx Identification: Ex ec ic nC IIC T4 Gc Certificate: IECEx BVS 18.0060X CCC/China-Ex Identification: Ex ic nA nC IIC T4 Gc UL, USA/Canada Identification: UL508 Listed Class I, Div. 2, Groups A, B, C, D T4A Class I, Zone 2, Group IIC T4A Shipbuilding approval Certificate: DNV GL TAA000021E Rev. 1 EACEx Identification: ï 2Ex ec ic nC IIC T4 Gc Certificate: BY/112 02.01 TP012 103.01 00081 DNV GL data Temperature: B Humidity: B Vibration: A EMC: A Enclosure: Required protection according to the Rules shall be provided upon installation on board |
| EMC data | Noise immunity: EN 61000-6-2 Note: When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 |
| Standards and regulations | GBStandard Standards/regulations: GB3836.1 GB3836.4 GB3836.8 |
| Mounting | Mounting type: DIN rail mounting Assembly instructions: The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35mm EN60715 DIN rail. Mounting position: any |
| ECLASS | ECLASS-11.0: 27210120 ECLASS-12.0: 27210120 ECLASS-13.0: 27210120 |
| ETIM | ETIM 9.0: EC002653 |
| UNSPSC | UNSPSC 21.0: 39121000 |
Description other products
