| Notes | Utilization restriction
EMC note: EMC: class A product, see manufacturer's declaration in the download area
|
| Product properties | Product type: Frequency value transformer
Product family: MINI Analog Pro
No. of channels: 1
Type: Signal conditioner
Configuration: DIP switches
Software
App
Insulation characteristics
Overvoltage category: II
Pollution degree: 2
|
| System properties | Functionality
Configuration: DIP switches
Software
App
|
| Electrical properties | No. of channels: 1
Electrical isolation between input and output: yes
Step response (0â99%): 120 ms (15 Hz sample rate)
35 ms (60Hz sample rate)
15 ms (240Hz sample rate, can only be set via software)
130 ms (15 Hz sample rate)
40 ms (60Hz sample rate)
20 ms (240Hz sample rate, can only be set via software)
Maximum temperature coefficient: < 0.01 %/K
Temperature coefficient, typical: 0.01 %/K
Electrical isolation Input/output/power supply
Rated insulation voltage: 300 Vrms
Test voltage: 3 kV AC (50Hz, 60s)
Insulation: Reinforced insulation according to IEC/EN61010-1
Supply
Nominal supply voltage: 24 VDC
Supply voltage range: 9.6 VDC ... 30 VDC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN60715)
Typical current consumption: 27 mA (12VDC)
13.5 mA (24VDC)
Power consumption: ⤠350 mW (9.6VDC)
|
| Input data | Signal: Voltage/current
Number of inputs: 1
Configurable/programmable: Yes
Voltage input signal: 0 V ... 10 V (via DIP switch)
2 V ... 10 V (via DIP switch)
0 V ... 5 V (via DIP switch)
1 V ... 5 V (via DIP switch)
10 V ... 0 V (via DIP switch)
10 V ... 2 V (via DIP switch)
5 V ... 0 V (via DIP switch)
5 V ... 1 V (via DIP switch)
0 V ... 12 V (can be set via software)
Max. voltage input signal: 12 V
Current input signal: 0 mA ... 20 mA (via DIP switch)
4 mA ... 20 mA (via DIP switch)
0 mA ... 10 mA (via DIP switch)
2 mA ... 10 mA (via DIP switch)
20 mA ... 0 mA (via DIP switch)
20 mA ... 4 mA (via DIP switch)
10 mA ... 0 mA (via DIP switch)
10 mA ... 2 mA (via DIP switch)
0 mA ... 24 mA (can be set via software)
Max. current input signal: 24 mA
Input resistance of voltage input: > 120 ké
Input resistance current input: approx. 50 é (+0.7V for test diode)
|
| Output data | Frequency: Frequency/transistor
Frequency output: 0 Hz ... 10 kHz (via DIP switch)
0 Hz ... 5 kHz (via DIP switch)
0 Hz ... 2.5 kHz (via DIP switch)
0 Hz ... 1 kHz (via DIP switch)
0 Hz ... 500 Hz (via DIP switch)
0 Hz ... 250 Hz (via DIP switch)
0 Hz ... 100 Hz (via DIP switch)
0 Hz ... 50 Hz (via DIP switch)
0 Hz ... 10.5 kHz (can be set via software)
Load min.: 4 mA ⤠(UL / RL) ⤠100 mA
12 mA ⤠(UL / RL) ⤠100 mA
Maximum transmission error: ⤠0.1 % (> 7 kHz ⤠0.2%)
< 0.2 % (PWM frequency ï£ 500Hz)
< 0.5 % (500Hz < PWM frequency ï£ 2000Hz)
< 1 % (2000Hz < PWM frequency ï£ 4000Hz)
< 2 % (4000Hz < PWM frequency ï£ 8000Hz)
< 3 % (8000Hz < PWM frequency ï£ 16000Hz)
Output signal PWM: 15.6 kHz (10bits, via DIP switch)
1.9 kHz (10bits, via DIP switch)
3.9 kHz (12bits, via DIP switch)
488 Hz (12bits, via DIP switch)
977 Hz (14bits, via DIP switch)
122 Hz (14bits, via DIP switch)
244 Hz (16bits, via DIP switch)
31 Hz (16bits, via DIP switch)
31 Hz ... 15.6 kHz (can be set via software)
Load current maximum: 100 mA
Maximum switching voltage: 30 VDC
Overrange/underrange: Can be set (via software)
Switching: Transistor
Number of outputs: 1
Contact switching type: 1 N/O contact
Minimum switching voltage: 1 VDC
Maximum switching voltage: 30 VDC
Min. switching current: 100 µA
Max. switching current: 100 mA (30VDC)
Signal
Number of outputs: 1
|
| Connection data | Connection method: Push-in connection
Stripping length: 10 mm
Conductor cross section rigid: 0.2 mm² ... 2.5 mm² (with ferrule)
0.14 mm² ... 2.5 mm² (without ferrule)
Conductor cross section flexible: 0.14 mm² ... 2.5 mm²
Conductor cross section AWG: 24 ... 12 (flexible)
|
| Ex data | Ex installation (EPL): Gc
Div.2
|
| Interfaces | Data: IFS interface
Connection method: Micro USB type B
|
| Signaling | Error indication: Red LED
|
| Dimensions | Width: 6.2 mm
Height: 109.81 mm
Depth: 119.2 mm
|
| Material specifications | Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 2
Housing material: PBT
|
| Environmental and real-life conditions | Ambient conditions
Degree of protection: IP20 (not assessed by UL)
Ambient temperature (operation): -40°C ... 70°C
Ambient temperature (storage/transport): -40°C ... 85°C
Altitude: ⤠2000 m
Permissible humidity (operation): 5 % ... 95 % (non-condensing)
|
| Approvals | CE
Certificate: CE-compliant
ATEX
Identification: ï II 3 G Ex ec IIC T4 Gc
Certificate: BVS 19 ATEX E 083 X
UKCAEx(UKEX)
Identification: ï II 3 G Ex ec IIC T4 Gc
Certificate: PxCIF21UKEX2905026X
IECEx
Identification: Ex ec IIC T4 Gc
Certificate: IECEx BVS 19.0072X
CCC/China-Ex
Identification: Ex nA IIC T4 Gc
Certificate: NEPSIGYJ20.1318X
UL, USA/Canada
Identification: UL508 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC T6
Shipbuilding approval
Certificate: DNV GL TAA000021E Rev. 1
EACEx
Identification: ï 2Ex ec IIC T4 Gc
Certificate: BY/112 02.01 TP012 103.01 00081
DNV GL data
Temperature: B
Humidity: B
Vibration: A
EMC: A
Enclosure: Required protection according to the Rules shall be provided upon installation on board
|
| EMC data | Noise immunity: EN 61000-6-2
Note: When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility: Conformance with EMC directive
Noise emission: EN 61000-6-4
|
| Mounting | Mounting type: DIN rail mounting
Assembly instructions: The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35mm EN60715 DIN rail.
Mounting position: any
|
Not available 
