2902985 PHOENIX CONTACT - Technology Bsa

Tecnichal data

Product properties	Product type: Network isolator MTTF: 18372 Years (SN29500 standard, temperature25°C, operating cycle21%) 13381 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 3348 Years (SN29500 standard, temperature40°C, operating cycle100%) MTBF: 38062 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) 12264 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
Electrical properties	Electrical isolation: Port X1//port X2 Insulation voltage input/output: 250 V_rms Test voltage data interface/data interface: 4 kV AC (50Hz, 1min.) Supply Supply voltage range: passive module, no supply voltage required
Interfaces	Signal: Ethernet PROFINET Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3 Serial transmission speed: 10/100 Mbps Connection method: M12 connectors (D-coded, female) No. of channels: 1 Tightening torque: Ã¢¤ 2 Nm Transmission length: Ã¢¤ 100 m (Total length across both ports (dependent on data rate and cable used)) Protocols supported: Transparent protocol for IPv4 and IPv6 Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3Ã¢ Connection method: M12 connectors (D-coded, female) No. of channels: 1
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/22af328cf8d02945b81d97ebebdac970/-S204x204-FJPG Width: 66 mm Height: 91 mm Depth: 34 mm
Material specifications	Material: Polycarbonate PC PC/ABS
Cable/line	Shielding: no connection to protective earth ground (PE) capacitive isolation between both shield connections
Environmental and real-life conditions	Ambient conditions Degree of protection: IP54 Ambient temperature (operation): -40°C ... 75°C (85°C for 10 min.; thereafter function can no longer be guaranteed - check device) Ambient temperature (storage/transport): -40°C ... 75°C Altitude: Ã¢¤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) Permissible humidity (operation): 10 % ... 95 % Permissible humidity (storage/transport): 5 % ... 95 %
Approvals	CE Certificate: CE-compliant Corrosive gas test Identification: ISA-S71.04-1985 G3 Harsh Group A
EMC data	Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Fast transients (burst) Standards/regulations: EN61000-4-4 Emitted interference Standards/regulations: EN61000-6-4 Radio interference voltage in acc. with EN 55011: ClassB, area of application: Industry and residential Emitted radio interference in acc. with EN 55011: ClassB, area of application: Industry and residential
Standards and regulations	Standards/regulations: EN 50121 and EN 50155 (for railway applications) IEC 60571 IEC 62368 Suitable in accordance with SELVEN50153
Mounting	Mounting type: Wall mounting Mounting position: Wall mounting

Technical Specs

ECLASS	ECLASS-11.0: 27240692 ECLASS-13.0: 27240692 ECLASS-12.0: 27240692
ETIM	ETIM 9.0: EC002584
UNSPSC	UNSPSC 21.0: 39121400

Description

Passive network isolator for electrical isolation in Ethernet networks. For the protection of Ethernet devices against potential differences of up to 4 kV. Can be used for transmission speeds of up to 100 Mbps. Ethernet connection via two M12 sockets (D-coded).

Download

PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Data_sheet_03785.pdf

Manufacturer_declaration_00697.pdf

Manufacturer_declaration_02120.pdf

Manufacturer_declaration_05532.pdf

Manufacturer_declaration_15756.pdf

Manufacturer_declaration_17707.pdf

Package_slip_01087.pdf

Technical_drawing_39679.pdf

Various_00003.pdf