Industrial Automation
Product properties | Product type: Solid-state relay module Product family: PLC-INTERFACE Application: Pulse stretching Operating mode: 100% operating factor Insulation characteristics Insulation: Basic insulation Insulation characteristics: Air clearances and creepage distances between the power circuits Insulation: Basic insulation Overvoltage category: II Pollution degree: 2 |
Electrical properties | Maximum power dissipation for nominal condition: 0.07 W Test voltage (Input/output): 2.5 kVrms (50Hz, 1min., input/output) Air clearances and creepage distances between the power circuits Rated insulation voltage: 50 VDC Rated surge voltage: 0.5 kV |
Input data | Rated control circuit supply voltage US: 24 VDC Voltage range with reference to US: 0.8 ... 1.2 Rated control supply current IS: 13 mA (Input low, output low) 19 mA (Input high, output high) Rated actuating voltage UC: 24 VDC Rated actuating current IC: 3 mA Input voltage range: 19.2 VDC ... 28.8 VDC "0" signal switching threshold in reference to UC: < 0.4 "1" signal switching threshold in reference to UC: > 0.8 Status display: Yellow LED Operating voltage display: Green LED Protective circuit: Reverse polarity protection Surge protection Surge voltage protection: > 33 VDC |
Output data | Contact switching type: 1 N/O contact Design of digital output: electronic Output voltage range: 3 VDC ... 48 VDC Limiting continuous current: 100 mA Surge voltage protection: > 54 VDC Voltage drop at max. limiting continuous current: < 1 VDC Output circuit: 3-conductor, ground-referenced Protective circuit: Reverse polarity protection Surge protection Free running |
Connection data | Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² 0.2 mm² ... 2.5 mm² (Single ferrule) 2x 0.5 mm² ... 1.5 mm² (TWIN ferrule) Conductor cross section AWG: 26 ... 14 Tightening torque: 0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing)) |
Dimensions | Width: 6.2 mm Height: 80 mm Depth: 86 mm |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C Ambient temperature (storage/transport): -25°C ... 75°C |
Approvals | Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group EN60068-2-60 |
Standards and regulations | Air clearances and creepage distances between the power circuits Standards/regulations: IEC 60947-5-1 |
Mounting | Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any |
ECLASS | ECLASS-11.0: 27371604 ECLASS-12.0: 27371604 ECLASS-13.0: 27371604 |
ETIM | ETIM 9.0: EC001504 |
UNSPSC | UNSPSC 21.0: 39122300 |
Description other products