Industrial Automation
TC MGUARD RS4000 4G VPN - Router
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Dimensions | Width: 45 mm Height: 130 mm Depth: 114 mm |
Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
Material specifications | Material: Metal |
Interfaces | Signal: Ethernet Web server: yes Basic functions: Router with intelligent firewall and VPN for 10 tunnels (up to 250 supported with optional additional license), CIFSIntegrity Monitoring (as an option), metal housing, slot for SD memory card Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3 Transmission speed: 10/100 Mbps (auto negotiation) Connection method: RJ45 No. of channels: 6 Transmission length: 100 m (shielded twisted pair) Protocols supported: TCP/IP, UDP/IP, FTP, HTTP Auxiliary protocols: ARP, DHCP, PING (ICMP), SNMP V1, SMTP Data: V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN66259-1 Serial transmission speed: 9.6; 19.2; 38.4; 57.6; 115.2kbps Connection method: D-SUB9 plug Transmission length: 15 m File format/coding: UART/NRZ: 8Data, 1/2Stop, None/Even/Odd Parity Data flow control/protocols: Software handshake, Xon/Xoff or hardware handshake RTS/CTS Wireless Interface description: GSM / GPRS / EDGE / UMTS / HSPA / LTE (FDD) Frequency range: 800 MHz (LTE B20) 900 MHz (LTE B8) 1800 MHz (LTE B3) 2100 MHz (LTE B1) 2600 MHz (LTE B7) 900 MHz (UMTS/HSPA B8) 1800 MHz (UMTS/HSPA B3) 2100 MHz (UMTS/HSPA B1) 900 MHz (2 W (EGSM)) 1800 MHz (1W (EGSM)) Data rate: ⤠100 Mbps (LTE, DL) ⤠50 Mbps (LTE, UL) Antenna: 50 é impedance SMA antenna socket Antenna connection method: SMA (female) SIM Interface: 1.8 volt, 3 volt LTE: CAT3 Network check: LED bar graph to display receive quality Protocols supported: GPS (Global Positioning System), GLONASS Country support: Europe |
System properties | Functionality Basic functions: Router with intelligent firewall and VPN for 10 tunnels (up to 250 supported with optional additional license), CIFSIntegrity Monitoring (as an option), metal housing, slot for SD memory card System requirements Supported browsers: HTTPS support required |
Input data | Digital Description of the input: Digital input Number of inputs: 3 Voltage input signal: 10 VDC ... 30 VDC Current input signal: 5 mA |
Output data | Signal Output name: Digital output Number of outputs: 3 Voltage output signal: 10 VDC ... 30 VDC (depending on the operating voltage) Current output signal: ⤠125 mA (Short-circuit-proof) |
Product properties | Product type: Security router for the DIN rail Application: Ethernet RS-232 MTTF: 532 Years (SN29500 standard, temperature25°C, operating cycle21%) 250 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 104 Years (SN29500 standard, temperature40°C, operating cycle100%) Insulation characteristics Degree of pollution: 2 Security functions 1:1 Network Address Translation (NAT) in the VPN: Supported Number of VPN tunnels: 10 (up to 250 tunnels with additional license as an option) Authentication: X.509v3 certificates with RSA or PSK Data integrity: MD5 SHA-1 Dynamic Host Configuration Protocol (DHCP) support: Server or Relay Agent Filtering: MAC addresses IP addresses Ports Protocols Firewall data throughput: max. 124 Mbps (Router mode, default firewall rules, bidirectional throughput) max. 58 Mbps (Stealth mode, default firewall rules, bidirectional throughput) Firewall rules: Configurable stateful inspection firewall with full scope of functions Basic functions: Router with intelligent firewall and VPN for 10 tunnels (up to 250 supported with optional additional license), CIFSIntegrity Monitoring (as an option), metal housing, slot for SD memory card Internet Protocol Security (IPsec) mode: ESP tunnel / ESP transport Link Layer Discovery Protocol (LLDP): As per protocol 802.2 Network Time Protocol (NTP) client: Client Remote Syslog Logging: On externals server Routing: Standard routing NAT 1:1-NAT Port forwarding Protection against: IP spoofing, DoS and Syn Flood Protection Encryption methods: DES, 3DES, AES-128, -192, -256 Virtual private network (VPN) throughput: max. 40 Mbps (Router) max. 26 Mbps (Stealth mode, VPN bidirectional throughput) |
Electrical properties | Electrical isolation: VCC // PE Maximum power dissipation for nominal condition: 7.68 W Mains type: Cellular communication Test voltage data interface/data interface: 1 kV (50Hz, 1min.) Test voltage data interface/power supply: 1 kV (50Hz, 1min.) Supply Supply voltage range: 11 VDC ... 36 VDC (via pluggable COMBICON screw terminal block) Typical current consumption: < 320 mA (24VDC) Max. current consumption: < 1.8 A (at 11VDC (incl. 3x125mA for the outputs)) Function Management: Web-based management, SNMP |
Connection data | Supply Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 2.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 2.5 mm² Single conductor/terminal point, rigid: 0.2 mm² ... 2.5 mm² Single-wire/terminal point, flexible: 0.2 mm² ... 2.5 mm² Conductor cross section, flexible [AWG]: 24 ... 14 Stripping length: 7 mm Tightening torque: 0.56 Nm ... 0.79 Nm |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 60°C Ambient temperature (storage/transport): -40°C ... 70°C Altitude: ⤠5000 m (For restrictions, see the manufacturer's declaration for altitude operation) Permissible humidity (operation): 5 % ... 95 % (non-condensing) |
Standards and regulations | Free from substances that could impair the application of coating: in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0 |
Approvals | CE Certificate: CE-compliant Corrosive gas test Identification: ISA-S71.04-1985 G3 Harsh Group A |
Mounting | Mounting type: DIN rail mounting |
EMC data | Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeâ Contact discharge: ± 6 kV (Test Level 3) Discharge in air: ± 8 kV (Test Level 3) Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldâ Frequency range: 80 MHz ... 3 GHz (Test Level 3) Field intensity: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)â Input: ± 2.2 kV (Test Level 3) Signal: ± 2.2 kV (Test Level 3) Comments: Criterion B Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)â Input: ± 0.5 kV (DC supply) Signal: ± 1 kV (Data line, asymmetrical) Comments: Criterion B Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceâ Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V Emitted interference Standards/regulations: EN61000-6-4 Radio interference voltage in acc. with EN 55011: EN55011 classA industrial area of application Emitted radio interference in acc. with EN 55011: EN 55011 class A industrial area of application Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself. |
ECLASS | ECLASS-11.0: 19170406 ECLASS-12.0: 19170406 ECLASS-13.0: 19170406 |
ETIM | ETIM 9.0: EC001478 |
UNSPSC | UNSPSC 21.0: 43222600 |
Description other products