2903588 PHOENIX CONTACT - Technology Bsa

Dimensions	Width: 45 mm Height: 130 mm Depth: 114 mm
Notes	Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
Material specifications	Material: Metal
Interfaces	Signal: Ethernet Web server: yes Basic functions: Router with simplified 2-click firewall and VPN for 2 tunnels (fixed), metal housing, slot for any SD memory card Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3 Transmission speed: 10/100 Mbps (auto negotiation) Connection method: RJ45 No. of channels: 4 Transmission length: 100 m (shielded twisted pair) Protocols supported: TCP/IP, UDP/IP, FTP, HTTP Auxiliary protocols: ARP, DHCP, PING (ICMP), SNMP V1, SMTP Data: V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN66259-1 Serial transmission speed: 9.6; 19.2; 38.4; 57.6; 115.2kbps Connection method: D-SUB9 plug Transmission length: 15 m File format/coding: UART/NRZ: 8Data, 1/2Stop, None/Even/Odd Parity Data flow control/protocols: Software handshake, Xon/Xoff or hardware handshake RTS/CTS Wireless Interface description: GSM / GPRS / EDGE / UMTS / HSPA / LTE (FDD) Frequency range: 800 MHz (LTE B20) 900 MHz (LTE B8) 1800 MHz (LTE B3) 2100 MHz (LTE B1) 2600 MHz (LTE B7) 900 MHz (UMTS/HSPA B8) 1800 MHz (UMTS/HSPA B3) 2100 MHz (UMTS/HSPA B1) 900 MHz (2 W (EGSM)) 1800 MHz (1W (EGSM)) Data rate: Ã¢¤ 100 Mbps (LTE, DL) Ã¢¤ 50 Mbps (LTE, UL) Antenna: 50 Ã© impedance SMA antenna socket Antenna connection method: SMA (female) SIM Interface: 1.8 volt, 3 volt LTE: CAT3 Network function: 4 time slots for receiving data, 4 time slots for transmitting data. The PIN is saved in the modem. After a voltage interruption, there is automatic redialing into the network. Integrated TCP/IP stack, firewall and VPN support, independent connection establishment. Network check: LED bar graph to display receive quality Protocols supported: GPS (Global Positioning System), GLONASS Country support: Europe
System properties	Functionality Basic functions: Router with simplified 2-click firewall and VPN for 2 tunnels (fixed), metal housing, slot for any SD memory card System requirements Supported browsers: HTTPS support required
Input data	Digital Description of the input: Digital input Number of inputs: 3 Voltage input signal: 10 VDC ... 30 VDC Current input signal: 5 mA
Output data	Signal Output name: Digital output Number of outputs: 3 Voltage output signal: 10 VDC ... 30 VDC (depending on the operating voltage) Current output signal: Ã¢¤ 125 mA (Short-circuit-proof)
Product properties	Product type: Security router for the DIN rail Application: Ethernet RS-232 MTTF: 582 Years (SN29500 standard, temperature25°C, operating cycle21%) 271 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 114 Years (SN29500 standard, temperature40°C, operating cycle100%) Insulation characteristics Degree of pollution: 2 Security functions 1:1 Network Address Translation (NAT) in the VPN: Supported Number of VPN tunnels: 2 (Fixed, Ipsec (IETF standard)) Authentication: X.509v3 certificates with RSA or PSK Data integrity: MD5 SHA-1 Dynamic Host Configuration Protocol (DHCP) support: Server or Relay Agent Filtering: Incoming or outgoing traffic Firewall data throughput: max. 124 Mbps (Router mode, default firewall rules, bidirectional throughput) max. 58 Mbps (Stealth mode, default firewall rules, bidirectional throughput) Firewall rules: Simplified 2-click stateful inspection firewall Basic functions: Router with simplified 2-click firewall and VPN for 2 tunnels (fixed), metal housing, slot for any SD memory card Internet Protocol Security (IPsec) mode: ESP tunnel / ESP transport Link Layer Discovery Protocol (LLDP): As per protocol 802.2 Network Time Protocol (NTP) client: Client Remote Syslog Logging: On externals server Routing: Standard routing NAT 1:1-NAT Port forwarding Encryption methods: DES, 3DES, AES-128, -192, -256 Virtual private network (VPN) throughput: max. 40 Mbps (Router mode, VPN bidirectional throughput) max. 26 Mbps (Stealth mode, VPN bidirectional throughput)
Electrical properties	Electrical isolation: VCC // PE Maximum power dissipation for nominal condition: 7.68 W Mains type: Cellular communication Test voltage data interface/data interface: 1 kV (50Hz, 1min.) Test voltage data interface/power supply: 1 kV (50Hz, 1min.) Supply Supply voltage range: 11 VDC ... 36 VDC (via pluggable COMBICON screw terminal block) Typical current consumption: < 320 mA (24VDC) Max. current consumption: < 1.8 A (at 11VDC (incl. 3x125mA for the outputs)) Function Management: Web-based management, SNMP
Connection data	Supply Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 2.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 2.5 mm² Single conductor/terminal point, rigid: 0.2 mm² ... 2.5 mm² Single-wire/terminal point, flexible: 0.2 mm² ... 2.5 mm² Conductor cross section, flexible [AWG]: 24 ... 14 Stripping length: 7 mm Tightening torque: 0.56 Nm ... 0.79 Nm
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 60°C Ambient temperature (storage/transport): -40°C ... 70°C Altitude: Ã¢¤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Standards and regulations	Free from substances that could impair the application of coating: in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0
Approvals	CE Certificate: CE-compliant Corrosive gas test Identification: ISA-S71.04-1985 G3 Harsh Group A
Mounting	Mounting type: DIN rail mounting
EMC data	Electromagnetic compatibility: Conformance with RED Directive 2014/53/EU Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeÃ¢ Contact discharge: ± 6 kV (Test Level 3) Discharge in air: ± 8 kV (Test Level 3) Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldÃ¢ Frequency range: 80 MHz ... 3 GHz (Test Level 3) Field intensity: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)Ã¢ Input: ± 2.2 kV (Test Level 3) Signal: ± 2.2 kV (Test Level 3) Comments: Criterion B Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)Ã¢ Input: ± 0.5 kV (DC supply) Signal: ± 1 kV (Data line, asymmetrical) Comments: Criterion B Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceÃ¢ Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V Emitted interference Standards/regulations: EN61000-6-4 Radio interference voltage in acc. with EN 55011: EN55011 classA industrial area of application Emitted radio interference in acc. with EN 55011: EN 55011 class A industrial area of application Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.