Industrial Automation
PACT RCP-4000A-1A-D95 - Current transformer
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product type: Current transformer Insulation characteristics Insulation: double insulation Insulation characteristicsâ Insulation: double insulation Overvoltage category: III (1000V, to neutral conductor) IV (600V, to neutral conductor) Pollution degree: 2 |
Electrical properties | Electrical isolation: Reinforced insulation in accordance with IEC 61010-1 Typical measuring error: < 1 % Protective circuit: Surge protection; 33V suppressor diode Temperature coefficients: 0.005 %/K (+10°C...+70°C, both components have the same ambient temperature) 0.07 %/K (-20°C...+10°C, both components have the same ambient temperature) Measuring coil Conductor structure signal line: 2x 0.22 mm (Signal (tinned)) 1x 0.22 mm (Shielding (tinned)) Insulation: double insulation Rated insulation voltage: 1000 VAC (rms CAT III) 600 VAC (rms CAT IV) Test voltage: 10.45 kV DC (60 s) Basic accuracy: <± 0.2 % Measuring transducers Linearity error: < 0.5 % (From the range end value) Maximum transmission error: ⤠0.5 % (From the range end value) Frequency range: 45 Hz ... 65 Hz Max. detectable harmonics: < 2 kHz Current consumption: < 190 mA (at 19.2 V) Test voltage: 1.5 kV AC (Supply/input and output: 50 Hz, 1 min) General Can be calibrated: no Class: 1 Accuracy class: 1 Converter type: Rogowski coil and 1A measuring transducer Supply: Measuring transducers Nominal supply voltage: 24 VDC -20%...+25% Nominal supply voltage range: 19.2 VDC ... 30 VDC Max. current consumption: 190 mA Power consumption: 4 W |
Input data | Frequency Designation: Measuring coil Frequency measuring range: 40 Hz ... 20000 Hz Position error: <± 0.1 % (typical) Linearity error: < 0.1 % Signal Input signal (at 50 Hz): 100 mV (1000 A) Curve type: Sine Input impedance: 27 ké (smallest measuring range) Current transformers Configurable/programmable: Via DIP switches Rated power: 1.5 VA Primary rated current Ipn: 0 A AC ... 100 A AC 0 A AC ... 250 A AC 0 A AC ... 400 A AC 0 A AC ... 630 A AC 0 A AC ... 1000 A AC 0 A AC ... 1500 A AC 0 A AC ... 2000 A AC 0 A AC ... 4000 A AC Phase angle: < 1° Can be calibrated: no Class: 1 Accuracy class: 1 Converter type: Rogowski coil and 1A measuring transducer |
Output data | Signal Designation: Measuring coil Output signal (at 50 Hz): 100 mV (no load, at 1,000 A) Output voltage (in no-load operation): VOUT = M * dI/dt Output voltage (sinusoidal, in no-load operation): 100 mV (VOUT = 2 * à * M * f * I (M = 0.318 üH; example: At 50 Hz; I = 1,000 A)) Accuracy class: < 1 Signalâ Designation: Measuring transducer Current output signal: 0 A AC ... 1 A AC Rated power: 1.5 VA Load: 0 é ... 1.5 é Max. distances for copper cables at PN max: 32 m (0.75mm² (AWG 20)) 64 m (1.5mm² (AWG 16)) 107 m (2.5mm² (AWG 14)) |
Connection data | Measuring transducer side Connection method: Screw connection Stripping length: 7 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14 Tightening torque: 0.5 Nm ... 0.6 Nm |
Signaling | Operating voltage display: Green LED |
Dimensions | Item dimensions Width: 22.5 mm Height: 85 mm Depth: 70.4 mm Measuring coil Length: 300 mm Diameter: 8.3 mm ±0.2mm Measuring coil when installed Diameter: 95 mm Signal line Length: 3 m Width: 22.5 mm Height: 85 mm Depth: 70.4 mm |
Material specifications | Coil material: Elastollan Housing material: PC Polyamide |
Environmental and real-life conditions | Ambient conditions Measuring coil degree of protection: IP67 (not assessed by UL) Measuring transducer degree of protection: IP20 Ambient temperature (operation): -30°C ... 80°C (Measuring coil) -20°C ... 70°C (Measuring transducer) Ambient temperature (storage/transport): -40°C ... 80°C (Measuring coil) -25°C ... 85°C (Measuring transducer) Altitude: < 2000 m Permissible humidity (operation): 5 % ... 95 % (non-condensing) |
Approvals | CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant CMIM Certificate: CMIM-compliant UL, USA/Canada Identification: UL 61010 Recognized Note: Measuring coil UL, USA/Canadaâ Identification: UL 508 Listed Note: Measuring transducer |
EMC data | Noise immunity: EN61000-6-3 Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 |
Standards and regulations | Electrical isolation: Reinforced insulation in accordance with IEC 61010-1 Standards/regulations: IEC 61010-1 IEC 61010-2-032 |
Mounting | Mounting type: DIN rail mounting |
ECLASS | ECLASS-11.0: 27210902 ECLASS-13.0: 27210902 ECLASS-12.0: 27210902 |
ETIM | ETIM 9.0: EC002048 |
UNSPSC | UNSPSC 21.0: 39121000 |
Description other products