Industrial Automation
QUINT-PS/96-110DC/24DC/10 - DC/DC converter
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Input data | DC operation Nominal input voltage range: 96 VDC ... 110 VDC Input voltage range: 67.2 VDC ... 154 VDC Wide-range input: yes Input voltage range DC: 67.2 VDC ... 154 VDC Voltage type of supply voltage: DC Inrush current: < 10 A (typical) Inrush current integral (I2t): 0.37 A2s Mains buffering time: typ. 10 ms (96 V DC) Current consumption: 3.5 A (96 V DC) 3.1 A (110VDC) Reverse polarity protection: ⤠154 VDC Protective circuit: Transient surge protection; Varistor Input fuse: 10 A 150 VDC (internal (device protection)) |
Output data | Efficiency: > 92 % (UIN 96 V DC / UOUT 24 V DC) > 92 % (UIN 110 V DC / UOUT 24 V DC) Output characteristic: U/I Nominal output voltage: 24 VDC ±1% Setting range of the output voltage (USet): 18 VDC ... 29.5 VDC (> 24 VDC, constant capacity restricted) Nominal output current (IN): 10 A (-40°C...60°C) POWER BOOST (IBoost): 12.5 A (-40°C...40°C permanent, UOUT = 24VDC) Selective Fuse Breaking (ISFB): 60 A (12ms) Magnetic circuit breaker tripping: B2 / B4 / B6 Derating: 60°C ... 70°C (2.5%/K) Feedback voltage resistance: 35 VDC Protection against overvoltage at the output (OVP): < 35 VDC Max. capacitive load: unlimited Active current limitation: 18A Control deviation: < 1 % (change in load, static 10 % ... 90 %) < 2 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage ±10 %) Residual ripple: < 20 mVPP Output power: 240 W Peak switching voltages nominal load: < 10 mVPP (20MHz) Maximum no-load power dissipation: 4 W (UIN 110 V DC) Power loss nominal load max.: 22 W (UIN 110 V DC) Rise time: < 2 ms (UOUT (10 % ... 90 %)) Connection in parallel: yes, for redundancy and increased capacity Connection in series: yes Signal: DC OK active Output description: UOUT > 0.9 x UN: High signal Switching voltage range: 18 VDC ... 24 VDC Maximum inrush current: < 20 mA (short-circuit-proof) Signal: POWER BOOST, active Output description: IOUT < IN: High signal Switching voltage range: 18 VDC ... 24 VDC Maximum inrush current: < 20 mA (short-circuit-proof) Signal: U Output description: UIN > 19.2 V: High signal Switching voltage range: 18 VDC ... 24 VDC Maximum inrush current: ⤠20 mA (short-circuit-proof) Signal: DC OK floating Output description: Relay |
Connection data | Input Connection method: Screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 12 Stripping length: 8 mm Screw thread: M3 Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Output Connection method: Screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 12 Stripping length: 7 mm Screw thread: M3 Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Signal Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 2.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 2.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 12 Screw thread: M3 Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm |
Signaling | Types of signaling: LED Active switching output Relay contact Signal output: DC OK active Status display: "DC OK" LED green Color: green Signal output: POWER BOOST, active Status display: "BOOST" LED yellow/IOUT > IN :LED on Color: yellow Note on status display: LED on Signal output: U Status display: LED "UIN < 0.8 x UN V" yellow/UIN < 0.8 x UN V DC: LED on Color: yellow Note on status display: LED on |
Electrical properties | Number of phases: 1.00 Insulation voltage input/output: 1.5 kV (type test) 1 kV (routine test) 1 kV (type test) |
Product properties | Product type: DC/DC converters Product family: QUINT POWER MTBF (IEC 61709, SN 29500): > 1357000 h (25°C) > 772000 h (40°C) Insulation characteristics Protection class: I Degree of pollution: 2 |
Dimensions | Width: 48 mm Height: 130 mm Depth: 125 mm Installation dimensions Installation distance right/left: 0 mm / 0 mm (⤠70°C) Installation distance right/left (active): 15 mm / 15 mm (⤠70°C) Installation distance top/bottom: 50 mm / 50 mm (⤠70°C) Installation distance top/bottom (active): 50 mm / 50 mm (⤠70°C) Alternative assembly Width: 122 mm Height: 130 mm Depth: 51 mm |
Mounting | Mounting type: DIN rail: 35 mm Assembly instructions: alignable: PN â¥50%, 5mm horizontally, 15mm next to active components, 50mm vertically alignable: PN <50%, 0mm horizontally, 40mm vertically top, 20 mm vertically bottom Mounting position: horizontal DIN rail NS 35, EN 60715 With protective coating: No |
Material specifications | Housing material: Metal Type of housing: Aluminum (AlMg3) Hood version: Galvanized sheet steel, free from chrome (VI) |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 70°C (>60°C Derating: 2,5%/K) Ambient temperature (storage/transport): -40°C ... 85°C Ambient temperature (start-up type tested): -40°C Climatic class: 3K3 (in acc. with EN 60721) Max. permissible relative humidity (operation): ⤠95 % (at 25°C, non-condensing) Shock: 18 ms, 30g, in each space direction (according to IEC 60068-2-27) Vibration (operation): < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) 15 Hz ... 150 Hz, 2.3g, 90 min. |
Standards and regulations | Rail applications: EN50121-4 Standard â Electronic equipment for use in electrical power installations and their assembly into electrical power installations: EN50178/VDE0160 (PELV) Standard - Electrical safety: EN60950-1/VDE0805 (SELV) Standard â Safety extra-low voltage: EN60950-1 (SELV) EN60204 (PELV) Standard - Safe isolation: DINVDE0100-410 |
Approvals | UL approvals: UL/C-UL listed UL508 UL/C-UL Recognized UL60950-1 UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
EMC data | EMC requirements for noise emission: EN61000-6-3 EN61000-6-4 EMC requirements for noise immunity: EN61000-6-1 EN61000-6-2 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeâ Contact discharge: 8 kV (Test Level 4) Discharge in air: 15 kV (Test Level 4) Comments: Criterion A Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldâ Frequency range: 80 MHz ... 1 GHz 1 GHz ... 2 GHz 2 GHz ... 3 GHz Test field strength: 20 V/m (Test Level 3) 10 V/m (Test Level 3) Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)â Input: 4 kV (Test Level 4 - asymmetrical) Output: 2 kV (Test Level 3 - asymmetrical) Signal: 2 kV (Test Level 4 - asymmetrical) Comments: Criterion A Surge voltage load (surge) Standards/regulations: EN61000-4-5 Input: 2 kV (Test Level 4 - symmetrical) 4 kV (Test Level 4 - asymmetrical) Output: 1 kV (Test Level 3 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Signal: 1 kV (Test Level 2 - asymmetrical) Comments: Criterion A Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceâ I/O/S: asymmetrical Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V (Test Level 3) Emitted interference Standards/regulations: EN61000-6-3 Radio interference voltage in acc. with EN 55011: EN55011 (EN55022) ClassB, area of application: Industry and residential Emitted radio interference in acc. with EN 55011: EN 55011 (EN 55022) Class B, area of application: Industry and residential Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself. |
ECLASS | ECLASS-11.0: 27040701 ECLASS-13.0: 27040701 ECLASS-12.0: 27040701 |
ETIM | ETIM 9.0: EC002540 |
UNSPSC | UNSPSC 21.0: 39121000 |
Description other products