Industrial Automation
Notes | General: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Product properties | Product type: Module carrier Insulation characteristics Insulation: Basic insulation Insulation characteristics: Air clearances and creepage distances Insulation: Basic insulation Overvoltage category: II Pollution degree: 2 |
Electrical properties | Max. permissible current: 1 A (Signal/channel) Nominal voltage UN: < 30 VDC (Per signal/channel) Air clearances and creepage distances Rated insulation voltage: 50 V Rated surge voltage: 0.5 kV Supported controller YOKOGAWA ProSafe-RS Suitable I/O card: SAI143 Supply Designation: Power module Note: Power supply via 2904673 TC-MACX-MCR-PTB power supply and error signaling module. Fuse: 2x 2.5 A on PCB, slow-blow (replaceable) Input voltage: 24 VDC Input voltage range: 19.2 VDC ... 30 VDC Input current: ⤠2 A Redundant supply: yes, decoupled from diodes Polarization and surge protection: Yes Output name: Switching output Contact switching type: 1 N/C contact (alarm = open) Maximum switching voltage: 50 VDC (0.3A) 30 VDC (2A) 33 VAC (2A) |
Connection data | Power supply Connection method: Screw connection Stripping length: 7 mm Number of connections: 1 Number of positions: 6 Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 Controller level Connection method: Yokogawa KS-compatible Number of connections: 2 Number of positions: 40 |
Signaling | Status display: 1 x red LED (error) 2x green LEDs (PWR1 and PWR2) |
Dimensions | Width: 242 mm Height: 170 mm Depth: 159.5 mm |
Material specifications | Flammability rating according to UL 94: V0 |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP00 Ambient temperature (operation): -20°C ... 60°C (Please observe module specifications) Ambient temperature (storage/transport): -40°C ... 80°C Altitude: ⤠2000 m Permissible humidity (operation): 5 % ... 95 % (non-condensing) Shock: 15g, according to IECý60068-2-27 Vibration (operation): 2g, according to IEC 60068-2-6 |
Approvals | UL, USA/Canada Identification: UL 61010 Listed Class I, Div. 2, Groups A, B, C, D T4 Class I, Zone 2, Group IIC |
Standards and regulations | Air clearances and creepage distances Standards/regulations: DINEN50178 |
Mounting | Mounting type: DIN rail mounting Assembly instructions: No end clamp Mounting position: vertical, horizontal |
ECLASS | ECLASS-11.0: 27141152 ECLASS-13.0: 27141152 ECLASS-12.0: 27141152 |
ETIM | ETIM 9.0: EC002780 |
UNSPSC | UNSPSC 21.0: 39121400 |
Description other products