Not available 
| Product properties | IEC power supply system: TN-S TT Type: Male Product type: Replacement plug Product family: SEC Family Number of positions: 4 Surge protection fault message: optical Insulation characteristics Overvoltage category: III Pollution degree: 2 IEC test classification: III T3 EN type: T3 |
| Connection data | Connection method: pluggable |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/48d1a14854fae1458ed13dac46a2c9e6/-S204x204-FJPG Width: 35.2 mm Height: 44.8 mm Depth: 60.9 mm Horizontal pitch: 2 Div. |
| Material specifications | Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA 6.6-FR 20% GF PA 6.6-FR Material group: I Housing material: PA 6.6-FR 20% GF PA 6.6-FR |
| Protective circuit | Mode of protection: L-N L-PE N-PE Direction of action: 3L-N & N-PE Nominal voltage UN: 230/400VAC(TN-S) 230/400VAC(TT - only in use with RCD) Nominal frequency fN: 50 Hz (60Hz) Maximum continuous voltage UC: 264 VAC Residual current IPE: ⤠5 µA Standby power consumption PC: ⤠2 VA (at UREF) ⤠2.2 VA (at UC) Reference test voltage UREF: 255 VAC Nominal discharge current In (8/20) µs: 3 kA Combination wave UOC: 6 kV Voltage protection level Up (L-N): ⤠1.4 kV Voltage protection level Up (L-PE): ⤠1.5 kV Voltage protection level Up (N-PE): ⤠1.5 kV TOV behavior at UT (L-N): 440 VAC (5s / withstand mode) 440 VAC (120min / withstand mode) TOV behavior at UT (L-PE): 440 VAC (5s / withstand mode) 440 VAC (120min / withstand mode) 1455 VAC (200ms / safe failure mode) TOV behavior at UT (N-PE): 1200 VAC (200ms / safe failure mode) Response time tA (L-N): ⤠25 ns Response time tA (L-PE): ⤠100 ns Response time tA (N-PE): ⤠100 ns Short-circuit current rating ISCCR: 1.5 kA AC |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 70°C Ambient temperature (storage/transport): -40°C ... 70°C Altitude: ⤠2000 m (amsl) Permissible humidity (operation): 5 % ... 95 % Shock (operation): 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation): 5g (10 ... 150 Hz/20 cycles/axis/X, Y, Z) |
| Standards and regulations | Standards/specifications: IEC 61643-11 Note: 2011 EN 61643-11 Standards/specifications: EN61643-11 Note: 2012 |
| Mounting | Mounting type: on base element |
| ECLASS | ECLASS-11.0: 27130890 ECLASS-13.0: 27171292 |
| ETIM | ETIM 9.0: EC002496 |
| UNSPSC | UNSPSC 21.0: 39121600 |
Description other products
