Not available 
| Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
| Product properties | Product type: Temperature transmitter Product family: MINI Analog Pro Type: Signal conditioner Configuration: DIP switches Software App Insulation characteristics Overvoltage category: II Pollution degree: 2 |
| Electrical properties | Electrical isolation: 3-way isolation Typical cold point errors: 2 K (2 K + (0,2 K * ÃT)) Protective circuit: Transient protection Step response (0â99%): 300 ms 570 ms Maximum temperature coefficient: ⤠0.01 %/K Transmission error thermocouples: 0.1%*600K / setmeasuring range; 0.1%>600K(C, E, J, K, N, T, L, U, M Gost, L Gost) 0.2 % * 600 K / set measuring range; 0.2 % > 600 K (B, R, S, A1, A2, A3) 0.2%* 600K / set measuring range; 0.2%> 600K (E, J, K, N, T, L, U, M Gost, L Gost); Highspeed Mode 0.4%* 600K / set measuring range; 0.4%> 600K (B, R, S, A1, A2, A3); Highspeed Mode Electrical isolation Input/output/power supply Rated insulation voltage: 300 Vrms Test voltage: 3 kV AC (50Hz, 60s) Insulation: Reinforced insulation according to IEC/EN61010-1 Supply Supply voltage range: 9.6 VDC ... 30 VDC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN60715) Typical current consumption: 32.7 mA (24VDC) 66.8 mA (12VDC) Power consumption: ⤠850 mW (at IOUT = 20 mA, 9.6 V DC, 600 é load) |
| Input data | Signal Number of inputs: 1 Measurement Number of inputs: 1 Configurable/programmable: Yes Input voltage range: - 500 mV ... 500 mV (can be set via software) Sensor types that can be used (TC): B, C, E, J, K, N, R, S, T, L, U, A-1, A-2, A-3, M, L Temperature measuring range: -250°C ... 2500°C (Range depends on sensor type, range can be set freely via software or in increments from -150°C to 1350°C via DIP switches) ⥠50 K Voltage measuring range: 3 mV Sensor type:: 500°C ... 1820°C -230°C ... 1000°C -210°C ... 1200°C -250°C ... 1372°C -200°C ... 1300°C -50°C ... 1768°C -50°C ... 1768°C -200°C ... 400°C -200°C ... 900°C -200°C ... 600°C 0°C ... 2500°C 0°C ... 1800°C 0°C ... 1800°C -200°C ... 100°C -200°C ... 800°C |
| Output data | Signal: Voltage/current Number of outputs: 1 Configurable/programmable: Yes Voltage output signal: 0 V ... 5 V (via DIP switch) 1 V ... 5 V (via DIP switch) 0 V ... 10 V (via DIP switch) 10 V ... 0 V (via DIP switch) 0 V ... 10.5 V (can be set via software) Max. voltage output signal: ï» 12.3 V Non-load voltage: < 17.5 V Current output signal: 0 mA ... 20 mA (via DIP switch) 4 mA ... 20 mA (via DIP switch) 20 mA ... 0 mA (via DIP switch) 20 mA ... 4 mA (via DIP switch) 0 mA ... 21 mA (can be set via software) Max. current output signal: 24.6 mA Short-circuit current: < 31.5 mA Load/output load voltage output: ⥠10 ké Load/output load current output: ⤠600 é (20mA) Ripple: < 10 mVrms < 10 mVrms (600é) Resolution, outputs (voltage): 1 mV Resolution, outputs (current): 2 µA |
| Connection data | Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.2 mm² ... 2.5 mm² (with ferrule) 0.14 mm² ... 2.5 mm² (without ferrule) Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 (flexible) |
| Ex data | Ex installation (EPL): Gc Div.2 |
| Interfaces | Data: IFS interface Connection method: Micro USB type B |
| Signaling | Status display: Green LED (supply voltage) Error indication: Red LED |
| Dimensions | Width: 6.2 mm Height: 109.81 mm Depth: 119.2 mm |
| Material specifications | Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 2 Housing material: PBT |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 (not assessed by UL) Ambient temperature (operation): -40°C ... 70°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: ⤠2000 m Permissible humidity (operation): 5 % ... 95 % (non-condensing) |
| Approvals | CE Certificate: CE-compliant ATEX Identification: ï II 3 G Ex ec IIC T4 Gc Certificate: BVS 20 ATEX E 024 X UKCAEx(UKEX) Identification: ï II 3 G Ex ec IIC T4 Gc Certificate: PxCIF21UKEX2902049X IECEx Identification: Ex ec IIC T4 Gc Certificate: IECEx BVS 20.0017X UL, USA/Canada Identification: UL508 Listed Class I, Div. 2, Groups A, B, C, D T6 Class I, Zone 2, Group IIC T6 Shipbuilding approval Certificate: DNV GL TAA00002UA EACEx Identification: ï 2Ex ec IIC T4 Gc Certificate: BY/112 02.01 TP012 103.01 00079 DNV GL data Temperature: B Humidity: B Vibration: A EMC: A Enclosure: Required protection according to the Rules shall be provided upon installation on board |
| EMC data | Noise immunity: EN 61000-6-2 Note: When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeâ Comments: Safety measures must be taken to prevent electrostatic discharge. Electromagnetic HF field Designation: Electromagnetic RF field Standards/regulations: EN61000-4-3 Typical deviation from the measuring range final value: 0.06 % Fast transients (burst) Designation: Fast transients (burst) Standards/regulations: EN61000-4-4 Typical deviation from the measuring range final value: 0.1 % Surge current load (surge) Standards/regulations: EN61000-4-5 Conducted interference Designation: Conducted interferences Standards/regulations: EN61000-4-6 Typical deviation from the measuring range final value: 0.05 % |
| Standards and regulations | Electrical isolation: 3-way isolation |
| Mounting | Mounting type: DIN rail mounting Assembly instructions: The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35mm EN60715 DIN rail. Mounting position: any |
| ECLASS | ECLASS-11.0: 27210129 ECLASS-12.0: 27210129 ECLASS-13.0: 27210129 |
| ETIM | ETIM 9.0: EC002919 |
| UNSPSC | UNSPSC 21.0: 41112100 |
Description other products
