Industrial Automation
Product properties | Product type: Solid-state relay module Product family: RIFLINEcomplete Application: Universal Operating mode: 100% operating factor Insulation characteristics Insulation: Basic insulation Insulation characteristics: Air clearances and creepage distances between the power circuits Insulation: Basic insulation Overvoltage category: III Pollution degree: 2 |
Electrical properties | Maximum power dissipation for nominal condition: 0.19 W Test voltage (Input/output): 2.5 kVrms (50Hz, 1min., input/output) Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 VAC Rated surge voltage: 4 kV |
Input data | Rated actuating voltage UC: 24 VDC Voltage range with reference to UC: 0.8 ... 1.2 Rated actuating current IC: 8 mA Input voltage range: 19.2 VDC ... 28.8 VDC "0" signal switching threshold in reference to UC: < 0.4 "1" signal switching threshold in reference to UC: > 0.8 Typical response time: 10 ms Typical turn-off time: 10 ms Status display: Yellow LED Protective circuit: Freewheeling diode Transmission frequency: 10 Hz |
Output data | Contact switching type: 1 N/O contact Design of digital output: electronic Output voltage range: 24 VAC ... 253 VAC (50/60Hz) Limiting continuous current: 750 mA (see derating curve) Maximum inrush current: 30 A (10 ms) Min. load current: 10 mA Leakage current: 1 mA (in off state) Surge current: 30 A AC (tp = 20ms, at 25°C) Phase angle cos phi min: 0.5 Max. load value: 4.5 A2s (tp = 10ms, at 25°C) Surge voltage protection: > 275 V Voltage drop at max. limiting continuous current: < 1 V Output circuit: 2-conductor, zero voltage switch Protective circuit: RCV circuit Utilization category CB Scheme (IEC 60947-5-1): AC12, 0.75 A/250 V |
Connection data | Connection method: Screw connection Stripping length: 7 mm Conductor cross section rigid: 0.5 mm² ... 4 mm² Conductor cross-section rigid (2 conductors with same cross section): 0.5 mm² ... 1.5 mm² Conductor cross section flexible: 0.5 mm² ... 2.5 mm² 0.5 mm² ... 2.5 mm² (Ferrules without plastic sleeve) 0.5 mm² ... 1.5 mm² (Ferrule with plastic sleeve) Conductor cross section flexible (2 conductors with same cross section): 0.5 mm² ... 1.5 mm² 0.5 mm² ... 1 mm² (TWIN ferrule with plastic sleeve) Conductor cross section AWG: 20 ... 12 (solid) 20 ... 14 (flexible) Tightening torque: 0.5 Nm ... 0.6 Nm |
Dimensions | Width: 6.2 mm Height: 84 mm Depth: 68 mm |
Material specifications | Flammability rating according to UL 94: V2 (Housing) |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C |
Approvals | Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group EN60068-2-60 |
Standards and regulations | Air clearances and creepage distances between the power circuits Standards/regulations: DINEN60947-5-1 |
Mounting | Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any |
ECLASS | ECLASS-11.0: 27371604 ECLASS-13.0: 27371604 ECLASS-12.0: 27371604 |
ETIM | ETIM 9.0: EC001504 |
UNSPSC | UNSPSC 21.0: 39122300 |
Description other products