Not available 
| Notes | General Note: Max. single impulse: 100 kA (8/20 µs) SPD according to AS/NZS1768 Cat. C3 |
| Product properties | IEC test classification: I / II I T1 / T2 T1 EN type: T1 / T2 T1 IEC power supply system: TN-C TT Type: DIN rail module, two-section, divisible Distance between live and grounded parts: 1 mm Product type: Combination type Product family: SEC Family Number of positions: 3 Surge protection fault message: Optical, remote indicator contact Insulation characteristics Overvoltage category: III Pollution degree: 2 |
| Electrical properties | Nominal frequency fN: 50 Hz (60Hz) Indicator/remote signaling Connection name: Remote fault indicator contact Switching function: Changeover contact Operating voltage: 12 VAC ... 250 VAC 125 VDC (200 mA DC) Operating current: 10 mA AC ... 1 A AC 1 ADC (30VDC) |
| Connection data | Connection method: Screw connection Fork-type cable lug Screw thread: M5 Tightening torque: 4.5 Nm Stripping length: 18 mm Conductor cross section flexible: 2.5 mm² ... 35 mm² 1.5 mm² ... 16 mm² Conductor cross section rigid: 2.5 mm² ... 35 mm² Conductor cross section AWG: 13 ... 2 Remote fault indicator contact Connection method: Plug-in/screw connection via COMBICON Screw thread: M2 Tightening torque: 0.25 Nm Stripping length: 7 mm Conductor cross section flexible: 0.14 mm² ... 1.5 mm² Conductor cross section rigid: 0.14 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/00df403ad2b02f48acacde140c7d098a/-S204x204-FJPG Width: 106.8 mm Height: 167 mm Depth: 74.5 mm (incl. DIN rail 7.5mm) Horizontal pitch: 6 Div. |
| Material specifications | Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA 6.6-FR 20% GF PBT-FR Material group: I Housing material: PA 6.6-FR 20% GF PBT-FR |
| Mechanical properties | Mechanical data Open side panel: No |
| Protective circuit | Mode of protection: L-PEN Direction of action: 3L-N/PE Nominal voltage UN: 240/415VAC (TN-C) Nominal frequency fN: 50 Hz (60Hz) Maximum continuous voltage UC: 264 VAC Nominal discharge current In (8/20) µs: 25 kA Maximum discharge current Imax (8/20) µs: 50 kA Impulse discharge current (10/350)µs, charge: 12.5 As Impulse discharge current (10/350)µs, specific energy: 160 kJ/é Impulse discharge current (10/350)µs, peak value limp: 25 kA Total discharge current Itotal (10/350)µs: 75 kA Follow current interrupt rating Ifi: 50 kA Short-circuit current rating ISCCR: 50 kA Voltage protection level Up: ⤠1.5 kV Residual voltage Ures: ⤠1.5 kV (at In) ⤠2.5 kV (at 50kA) ⤠1.2 kV (at 12.5kA) ⤠1 kV (at 5 kA) ⤠0.9 kV (at 2.5 kA) Front of wave sparkover voltage at 6 kV (1.2/50) µs: ⤠1.5 kV TOV behavior at UT: 415 VAC (5s / withstand mode) 460 VAC (120min / withstand mode) Response time tA: ⤠100 ns Additional technical data Maximum continuous voltage UC: 275 VAC Short-circuit current rating ISCCR: 100 kA Follow current interrupt rating Ifi: 100 kA |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 (only when all terminal points are used) Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: ⤠4000 m (amsl) Permissible humidity (operation): 5 % ... 95 % |
| Standards and regulations | Standards/specifications: IEC 61643-11 Note: 2011 EN 61643-11 Standards/specifications: EN61643-11 Note: 2012 |
| Mounting | Mounting type: DIN rail: 35 mm |
| ECLASS | ECLASS-11.0: 27130802 ECLASS-13.0: 27171201 |
| ETIM | ETIM 9.0: EC000381 |
| UNSPSC | UNSPSC 21.0: 39121600 |
Description other products
