Industrial Automation
MACX MCR-VAC-PT - Voltage measuring transducers
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product type: Voltage transducer Insulation characteristics Pollution degree: 2 |
Electrical properties | Alignment span: ± 20 % Alignment zero: ± 20 % Frequency measuring range: 45 Hz ... 405 Hz Electrical isolation: IEC 61010-2-30 (Measuring category II (1000 V)Measuring category III (600 V)Measuring category IV (300 V)) IEC 61010-1 (Overvoltage category III at 300VOvervoltage category IV at 150V) Test voltage: 5.3 kV AC (50Hz, 60s) 2.2 kV AC (50Hz, 60s) Protective circuit: Surge protection; 33V suppressor diode Step response (10-90%): < 180 ms Maximum temperature coefficient: < 0.015 %/K Maximum transmission error: < 1 % (from a measuring range final value, 45...65Hz) < 1.3 % (from a measuring range final value, 65...405Hz) Supply Nominal supply voltage: 24 VDC (-20%...+25%) Supply voltage range: 19.2 VDC ... 30 VDC Max. current consumption: < 45 mA |
Input data | Measurement Configurable/programmable: Yes Input voltage range: 0 VAC ... 550 VAC Input resistance of voltage input: 5500 ké Maximum input voltage: + 660 VAC Impulse form: AC voltage Measurementâ Input voltage range: 0 VAC ... 370 VAC Input resistance of voltage input: 3700 ké Measurementââ Input voltage range: 0 VAC ... 250 VAC Input resistance of voltage input: 2500 ké Measurementâââ Input voltage range: 0 VAC ... 170 VAC Input resistance of voltage input: 1700 ké Measurementââââ Input voltage range: 0 VAC ... 120 VAC Input resistance of voltage input: 1200 ké Measurementâââââ Input voltage range: 0 VAC ... 80 VAC Input resistance of voltage input: 800 ké Measurementââââââ Input voltage range: 0 VAC ... 54 VAC Input resistance of voltage input: 800 ké Measurementâââââââ Input voltage range: 0 VAC ... 36 VAC Input resistance of voltage input: 800 ké Measurementââââââââ Input voltage range: 0 VAC ... 24 VAC Input resistance of voltage input: 240 ké |
Output data | Signal: Voltage Voltage output signal: 0 V ... 10 V 2 V ... 10 V Max. voltage output signal: ⤠11 V Load/output load voltage output: > 10 ké Ripple: 50 mV Signal: Current Current output signal: 0 mA ... 20 mA 4 mA ... 20 mA Max. current output signal: ⤠22 mA Load/output load current output: < 500 é Max. capacitive load: < 1000 pF Max. inductive load: < 1 mH |
Connection data | Connection method: Push-in connection Stripping length: 8 mm Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 |
Dimensions | Width: 22.5 mm Height: 118 mm Depth: 114 mm |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C (non-condensing) Altitude: ⤠2000 m Permissible humidity (operation): 10 % ... 95 % (non-condensing) |
Approvals | CE Certificate: CE-compliant UKCA Certificate: UKCA-compliant UL, USA/Canada Identification: UL 61010 Listed |
EMC data | Low Voltage Directive: Conformance with Low Voltage Directive Noise immunity: EN 61000-6-2 Note: When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 Conducted interference Frequency range: 45 Hz ... 405 Hz |
Standards and regulations | Standards/regulations: IEC 61010-1 IEC 61010-2-030 |
Mounting | Mounting type: DIN rail mounting Assembly instructions: Can be aligned with spacing = 10 mm Mounting position: any |
ECLASS | ECLASS-11.0: 27210125 ECLASS-13.0: 27210125 ECLASS-12.0: 27210125 |
ETIM | ETIM 9.0: EC002477 |
UNSPSC | UNSPSC 21.0: 39121000 |
Description other products