Not available 
| Notes | General: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Product properties | Product type: Module carrier Insulation characteristics: Air clearances and creepage distances Overvoltage category: II Pollution degree: 2 |
| Electrical properties | Max. permissible current: ± 1 A (per signal path) Nominal voltage UN: < 50 VDC (Per signal/channel) Supported controller universal Suitable I/O card: universal Supply Designation: Device supply Fuse: 2x 2.5 A (designed for redundancy operation) Input voltage range: 19.2 VDC ... 30 VDC Input current: ⤠2 A |
| Connection data | Voltage supply X20 Connection method: Screw connection Stripping length: 7 mm Number of connections: 1 Number of positions: 6 Conductor cross section rigid: 0.14 mm² ... 2.5 mm² Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 Controller X1 Connection method: D-SUB pin strip Number of connections: 1 Number of positions: 37 CH1...CH16 cable sets Connection method: PTSM connector Number of positions: 4 |
| Dimensions | Width: 147 mm Height: 170 mm Depth: 159.5 mm |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP00 Ambient temperature (operation): -20°C ... 60°C (Please observe module specifications) Ambient temperature (storage/transport): -40°C ... 80°C Altitude: ⤠2000 m (Above sea level) Permissible humidity (operation): 5 % ... 95 % (non-condensing) Shock: 15g, according to IECý60068-2-27 Vibration (operation): 2g, according to IEC 60068-2-6 |
| Approvals | UL, USA/Canada Identification: UL 61010 Listed Class I, Div. 2, Groups A, B, C, D T4 Class I, Zone 2, Group IIC |
| Standards and regulations | Air clearances and creepage distances Standards/regulations: DINEN60664-1:2008 |
| Mounting | Mounting type: DIN rail mounting Assembly instructions: No end clamp Mounting position: any |
| ECLASS | ECLASS-11.0: 27141152 ECLASS-12.0: 27141152 ECLASS-13.0: 27141152 |
| ETIM | ETIM 8.0: EC002780 |
| UNSPSC | UNSPSC 21.0: 39121400 |
Description other products
