Not available 
| Product properties | IEC test classification: II T2 EN type: T2 IEC power supply system: DC Type: Male Product type: Replacement plug Product family: SEC Family Number of positions: 1 Surge protection fault message: optical Insulation characteristics Overvoltage category: III Pollution degree: 2 |
| Electrical properties | Nominal voltage UN: 350 VDC ... 400 VDC |
| Connection data | Connection method: pluggable |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/e7cb446bdeab77498a0d023a1cee84c2/-S204x204-FJPG Width: 11.7 mm Height: 46.4 mm Depth: 59.4 mm Horizontal pitch: 0.6 Div. |
| Material specifications | Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA6.6-FR 20% GF PBT-FR Material group: I Housing material: PA 6.6-FR 20% GF PBT-FR |
| Protective circuit | Mode of protection: (DC+) - (DC-) (DC+/DC-) - PE Direction of action: (DC+/DC-) - PE Nominal voltage UN: 350 VDC ... 400 VDC Maximum continuous voltage UC: 450 VDC Residual current IPE: ⤠350 µA DC Nominal discharge current In (8/20) µs: 20 kA Maximum discharge current Imax (8/20) µs: 40 kA Impulse discharge current (10/350)µs, charge: 0.5 As Impulse discharge current (10/350)µs, specific energy: 0.25 kJ/é Impulse discharge current (10/350)µs, peak value limp: 1 kA Short-circuit current rating ISCCR: 0.1 kA (without backup fuse) 6 kA (for 20 A gG/B backup fuse) Voltage protection level Up: ⤠1.5 kV Residual voltage Ures: ⤠1.5 kV (at In) ⤠1.3 kV (at 10 kA) ⤠1.2 kV (at 5 kA) ⤠1.1 kV (at 4 kA) ⤠1 kV (at 2 kA) TOV behavior at UT: 551 VDC (5s / withstand mode) Response time tA: ⤠25 ns Max. backup fuse with V-type through wiring: 20 A (gG / B at ISCCR > 200 A) 10 A (gG/B at ISCCR >100A) Max. backup fuse with branch wiring: 20 A (gG / B at ISCCR > 200 A) 10 A (gG/B at ISCCR >100A) |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: ⤠6000 m (amsl) Permissible humidity (operation): 5 % ... 95 % Shock (operation): 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation): 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
| Approvals | UL specifications Maximum continuous operating voltage MCOV: 450 VDC Nominal discharge current In: 20 kA Mode of protection: (DC+) - G (DC-) - G Nominal voltage: 400 VDC Power distribution system: DC Measured limiting voltage MLV: 1640 V SPD Type: 4CA |
| Standards and regulations | Standards/specifications: IEC 61643-11 Note: 2011 EN 61643-11 Standards/specifications: EN61643-11 Note: 2012 |
| Mounting | Mounting type: on base element |
| ECLASS | ECLASS-11.0: 27130890 ECLASS-13.0: 27171292 |
| ETIM | ETIM 9.0: EC002496 |
| UNSPSC | UNSPSC 21.0: 39121600 |
Description other products
